Toyota 4Runner Drivetrains
Top Toyota 4Runner Drivetrains Categories
We carry over 414 Drivetrains in inventory for the Toyota 4Runner. If you’re looking for aftermarket Drivetrains for your Toyota 4Runner, check out all these categories:
Essential Toyota 4Runner Drivetrains
Dorman – Transfer Case Shift Fork (Part No.600-565)
from
$95.99
Shift fork pads degraded? This transfer case shift fork directly replaces the original equipment on certain vehicle applications to properly restore four-wheel drive functionality.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case shift fork matches the fit and function of the original fork on certain vehicle years, makes and models
- Effective fix – restores proper 4WD operation after original fork pads degrade
- Durable construction – built for reliable longevity, free of defects in materials and craftmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
National – Shaft Repair Sleeve (Part No.99166)
from
$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Milemarker – Hub Conversion Kit (Part No.95-29918)
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.387)
from
$25.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion (Part No.41206)
from
$123.99
Product Features:
See More
- Fits Toyota V6 rear
- Conversion yoke for 29 spline gears
- 29 spline pinion
National – Multi Purpose Bearing (Part No.HB-24)
from
$227.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Toyota 8" & V6 Gasket (Part No.23028)
Driveworks – Taper Bearing Cone (Part No.S-HM-88649)
from
$19.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – V6 & L/C Reverse Drop Out Side Adjusters (Part No.33365)
from
$38.99
Product Features:
See More
- Side adjuster
- Fits Toyota V6 and Landcruiser reverse rotation front
Dorman – Pre-Pressed Rear Axle (Part No.926-137)
from
$867.99
Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install..
Product Features:
See More
Product Features:
- Easier installation – this loaded axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box.
- Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
- Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
Dorman – Differential 4WD Actuator Fork (Part No.600-995)
from
$78.99
This 4WD actuator fork directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality to the four-wheel drive system.
Product Features:
See More
Product Features:
- Ideal replacement – this 4WD actuator fork directly replaces the original equipment part on specific vehicle years, makes and models
- Effective fix – installation addresses inoperative four-wheel-drive actuation caused by failed original equipment fork
- Cost-effective solution – offers original equipment fit and function at a competitive price
- Trustworthy quality – backed by a team of designers and engineers in the United States
USA Standard Gear – 7.5" Toyota Spartan Locker Cross Pin (Part No.17030)
from
$49.99
7.5″ Toyota Spartan locker cross pin.
Product Features:
See More
Product Features:
- USA Standard Gear heavy-duty short cross pin shaft
- Fits Toyota 7.5″
- Works with Spartan Locker or standard open spider gears
EMPI – RE CV Joint Boot Kit (Part No.K6010182648EMP)
from
$26.96
The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
USA Standard Gear – Spool For Toyota V6 (Part No.59012)
Yukon Gear – Outer Oil Slinger (Part No.33025)
from
$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.
Product Features:
See More
Product Features:
- Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota 8.2" 12 Bolt Rear In 4.56 Ratio (Part No.24636)
from
$519.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
See More
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
USA Standard Gear – Standard Spider Gear Set For Toyota 8", 4 Cylinder (Part No.39031)
from
$204.99
Product Features:
See More
- Spider gear kit
- Fits Toyota 8″ with 4 cylinder engine
- Includes two side gears, two pinion gears, cross pin shaft, roll pin spider gear thrust washers.
NOK – Pinion Seal (Part No.J7010163834NOK)
from
$11.65
Pinion Seal
Yukon Gear – DiffrlPartsKit (Part No.12091)
from
$128.99
DiffrlPartsKit
Yukon Gear – DiffRingGearBolt (Part No.33580)
from
$7.99
DiffRingGearBolt
Yukon Gear – Axle Bearing & Seat Kit For Toyota 8", 7.5" & V6 Rear (Part No.10044)
from
$294.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (inner and outer seals) for Toyota 7.5″, 8″, and V6 rear. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing and seal kit for Toyota 7.5″, 8″ and V6 rear
- Includes axle bearing, inner and outer axle seals and snap ring
- This kit will not work with ABS applications
- Services one side
Dorman – Rear Differential Cover (Part No.926-993)
from
$92.99
When the thin-gauge steel corrodes on 4Runner and Tacoma truck rear differential covers, the typical solution has been to replace the entire axle. This Dorman OE FIX weld-on solution allows direct replacement of only the failed cover.
Product Features:
See More
Product Features:
- Rear Differential Cover
- Rear Differential Cover
- When the thin-gauge steel corrodes on 4Runner and Tacoma truck rear differential covers, the typical solution has been to replace the entire axle. This Dorman OE FIX weld-on solution allows direct replacement of only the failed cover.
- Direct replacement – this weld-on differential cover directly replaces a corroded original cover on certain Toyota 4Runner and Tacoma trucks
- Cost-effective repair – rather than buy a new axle, cut off the old cover and weld on this new one
Valvoline – ATF for Mercon®V Applications Conventional, 1 Quart (Part No.822345)
from
$12.99
Valvoline ATF for MERCON®V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON®SP, MERCON®LV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON®V, MERCON®, DEXRON®-III, DEXRON®-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON® or MERCON® fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Yukon Gear – Bearing Race Driver (Part No.56005)
from
$126.99
Bearing race driver front Toyota 7.5″, 8″, Landcruiser, and the Suzuki Samurai. No return. (TOY30306).
Product Features:
See More
Product Features:
- Bearing race driver
- Fits 30306 race
- All steel construction
Toyota 4Runner Drivetrains Categories
Helping You Find the Right Drivetrains for Your Toyota 4Runner
You love your 4Runner. So we’ve made it easier than ever to help you find Toyota 4Runner Drivetrains in our online catalog. Our inventory holds 414 aftermarket and OEM Drivetrains for your Toyota 4Runner, ranging from $2.99 to $1,356.99.
We offer parts from 28 brands trusted to make quality Drivetrains for your Toyota 4Runner. Before you buy, take some time to read through customer reviews. We currently have 87,890 reviews of Toyota 4Runner Drivetrains from previous customers. Some of the top rated parts include C.V. Joint Solvent Welded Split Boot Kit Outer with 2.5 stars and Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter with 3.3 stars.
Find your 4Runner Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Toyota 4Runner part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your Toyota 4Runner
Our inventory holds Drivetrains for your Toyota 4Runner from 28 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, National, and Carquest Premium, all of which can keep that Toyota happy.
We have Felpro parts available for your Toyota 4Runner in categories like Differentials. Some of the top-rated Felpro parts in these categories are:
Top-Rated Valvoline Drivetrains
Leading Valvoline Drivetrains
We carry Valvoline brand parts for your Toyota 4Runner across several catalog categories, including Differentials. Some of our most reviewed Valvoline parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for Toyota 4Runner Drivetrains
What are the most purchased Drivetrains for the Toyota 4Runner?
Out of 414 Drivetrains for the Toyota 4Runner, the most popular in our inventory are:
What are the top-rated Toyota 4Runner Drivetrains?
Top-rated Drivetrains for your Toyota 4Runner based on customer reviews/ratings are:
from
$21.99
(88)
C.V. Joint Solvent Welded Split Boot Kit Outer
“This kit was easily installed and solved my problem”
from
$32.99
(18)
Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
“Well built , with grease fittings. Good OEM alternative!! Recommend!!”
from
$132.99
(14)
CV Axle Shaft Assembly
“Axle appears to be identical to OEM. Joints are nice and tight. Boots and bands appear to be quality material. Only time will tell how they hold up.”
