1985 Toyota 4Runner Drivetrains

Popular 1985 Toyota 4Runner Drivetrains Categories

Essential Drivetrains for 1985 Toyota 4Runners

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Corteco – Axle Seal (Part No.K4021473844CFW)

Axle Seal

from

$8.89
Axle Seal

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

Tapered Cup Wheel Bearing Assembly

from

$8.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Taper Bearing Cone (Part No.S-HM-88649)

Taper Bearing Cone

from

$19.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

USA Standard Gear – Master Overhaul Kit for the ’86 and Newer Toyota 8" Differential (Part No.37070)

Master Overhaul Kit for the '86 and Newer Toyota 8" Differential

from

$261.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Toyota 8″ and 4 cylinder engine, 1986 and up with OEM ring and pinion set
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion, With Pinion Seal & Pinion Nut (Part No.41212)

Yoke For Toyota V6 Rear With 29 Spline Pinion, With Pinion Seal & Pinion Nut

from

$144.99
Product Features:
  • Conversion kit
  • Fits Toyota V6 rear with 29 spline pinion
  • Includes yoke , pinion seal, and pinion nut
See More

National – Shaft Repair Sleeve (Part No.99177)

Shaft Repair Sleeve

from

$39.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – 8" Standard Open Pinion Gear Thrust Washer (Part No.33392)

8" Standard Open Pinion Gear Thrust Washer

from

$7.99
8″ standard Open pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer
  • Fits Toyota 8″ with 4 cylinder engine
See More

Yukon Gear – Toyota V6 Freeze Plug, 3/4" Thread (Part No.33464)

Toyota V6 Freeze Plug, 3/4" Thread

from

$6.99
Product Features:
  • Fill plug
  • Fits Toyota V6
See More

Powertrax – Lock Right Locker (Part No.1620-LR)

Lock Right Locker

from

$323.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Air Line Repair Kit, Zip Locker (Part No.34003)

    Air Line Repair Kit, Zip Locker

    from

    $52.99
    Air line repair kit, ZIP locker.

    Product Features:
    • Air line repair kit
    • Includes 20′ air line and two repair fittings
    See More

    Yukon Gear – Toyota Bearing Retainer For ’01-’02 4Runner, ’01-’04 Tacoma & 00-’06 Tundra (Part No.33421)

    Toyota Bearing Retainer For '01-'02 4Runner, '01-'04 Tacoma & 00-'06 Tundra

    from

    $22.99
    Product Features:
    • Bearing retainer
    • Fits 2001-2002 Toyota 4Runner, 2001-2004 Tacoma and 2000-2006 Tundra
    See More

    National – Bearings (Part No.32307-W)

    Bearings

    from

    $87.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Matched cup and cone components ensures consistent quality and outstanding performance
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    FAG US – CUP (Part No.JLM104910)

    CUP

    from

    $11.99
    CUP

    Milemarker – Hub Conversion Kit (Part No.95-29918)

    Hub Conversion Kit

    from

    $86.99
    Converts automatic to manual.

    Product Features:
    • Hub Conversion Kit
    See More

    National – Bearings (Part No.307-L)

    Bearings

    from

    $37.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Outer Oil Slinger (Part No.33025)

    Outer Oil Slinger

    from

    $10.99
    Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.

    Product Features:
    • Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
    See More

    Motive Gear – Differential Gear Install Kit (Part No.TOYIK)

    Differential Gear Install Kit

    from

    $34.99
    Product Features:
    • MINI-INSTALL TOYOTA 8″
    See More

    Yukon Gear – Pinion Install Kit For Toyota Clamshell Design Front Reverse Rotation Differential (Part No.13102)

    Pinion Install Kit For Toyota Clamshell Design Front Reverse Rotation Differential

    from

    $353.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits Toyota 8″ clamshell front
    • Reverse rotation only
    • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
    See More

    Yukon Gear – Toyota 8" & V6 Gasket (Part No.23028)

    Toyota 8" & V6 Gasket

    from

    $11.99
    Toyota 8″ & V6 gasket.

    Product Features:
    • Dropout gasket
    • Fits Toyota 8″ and V6
    See More

    Yukon Gear – V6 Side Gear Thrust Washer (Part No.33391)

    V6 Side Gear Thrust Washer

    from

    $23.99
    V6 side gear Thrust washer.

    Product Features:
    • Side gear thrust washer
    • Fits Toyota V6
    See More

    Motive Gear – Differential Ring and Pinion (Part No.T488)

    Differential Ring and Pinion

    from

    $220.99


    Product Features:
    • TOY 10BL 7.8 R/P 4.88 MG
    See More

    Felpro – Differential Carrier Gasket (Part No.RDS 55428)

    Differential Carrier Gasket

    from

    $6.79
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    EMPI – RE CV Joint Boot Kit (Part No.K6010182694EMP)

    RE CV Joint Boot Kit

    from

    $37.42
    With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

    Product Features:
    • Help restore the vehicle to like-new condition
    • Constructed of high strength OE materials
    • Resists environmental contamination
    • Protects the CV joint from premature failure
    See More

    Dorman – Rear Drive Shaft: OE Fix (Part No.936-723)

    Rear Drive Shaft: OE Fix

    from

    $613.99
    The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

    Product Features:
    • Rear Driveshaft Assembly.
    • Rear Drive Shaft: OE Fix.
    • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
    • Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
    See More

    Yukon Gear – Differential (Part No.26051)

    Differential

    from

    $782.99
    Differential

    Yukon Gear – O-Ring For Toyota & Dana 44 Zip Locker Seal Housing (Part No.34004)

    O-Ring For Toyota & Dana 44 Zip Locker Seal Housing

    from

    $11.29
    Product Features:
    • O-ring for seal housing
    • Fits Dana Spicer 44 and Toyota 8″ and V6
    See More

    Yukon Gear – DiffrlCarrBng (Part No.18109)

    DiffrlCarrBng

    from

    $203.99
    DiffrlCarrBng

    Upgrade your 1985 Toyota 4Runner with Top-Quality Drivetrains

    When it comes to maintaining or upgrading your 1985 Toyota 4Runner, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Drivetrains are key to keeping your 4Runner functioning at its best. At Advance Auto Parts, we offer a wide selection of 192 Drivetrains for the 1985 Toyota 4Runner, designed to meet your needs without breaking the bank. From 4WD Component replacements to Drive Shafts and Axles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1985 Toyota 4Runner at great prices. Our Drivetrains inventory for this model ranges from just $2.58 to $1,566.99, with an average price of $205.61. Our 192 Drivetrains in stock come from 22 trusted brands, so you’re sure to find the right part for your 1985 Toyota 4Runner without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Toyota 4Runner, we stock popular OEM and aftermarket Drivetrains from top names like Moog Driveworks, and more. Moog Drivetrains start at just $25.99 and boast an impressive 4 stars average rating from customers. With 54 customer reviews and counting, our 1985 Toyota 4Runner Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1985 Toyota 4Runner is always ready to roll. We’re committed to providing you with everything you need to keep your 4Runner in top shape, all in one place. Start shopping confidently below for your 1985 Toyota 4Runner!

    Best-Selling 4WD Components for 1985 Toyota 4Runners

    Enhance the driving experience in your Toyota with 2 quality 4WD Component components, starting at $244.99.

    Milemarker – MileMarker Supreme; Manual Hub (Part No.490)

    MileMarker Supreme; Manual Hub

    from

    $356.99
    Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.

    Product Features:
    • Ultimate In Style And Service
    • Latest Patented Technology
    • Smooth Operation
    • Limited Lifetime Warranty
    See More

    Rugged Ridge – Axle Locking Hub Kit; Manual (Part No.15001.21)

    Axle Locking Hub Kit; Manual

    from

    $244.99
    Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure.

    Product Features:
    • Impact Resistant Nodular Iron
    • Corrosion Resistant
    • Better 4WD Performance
    • Better Fuel Economy
    • Easy Install
    See More

    Most Popular 1985 Toyota 4Runner Drive Shafts and Axles

    Customize your Toyota with 18 Drive Shafts and Axles products like Drive Shaft and Axles, Axle Shaft Seals, and Axle Shaft Bearings, all priced under $883.99.

    National – Shaft Repair Sleeve (Part No.99177)

    Shaft Repair Sleeve

    from

    $39.49
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Yukon Gear – Inner Axle Seal For 7.5", 8" And V6 Toyota Rear (Part No.30014)

    Inner Axle Seal For 7.5", 8" And V6 Toyota Rear

    from

    $23.99
    Inner axle seal for 7.5″, 8″ and V6 Toyota rear.Yukon Mighty seal.

    Product Features:
    • Rear inner axle seal
    • Fits Toyota 7.5″, 8″ with 4 cylinder engine, and V6
    See More

    Yukon Gear – Outer Axle Seal For Toyota 7.5", 8" & V6 Rear (Part No.30012)

    Outer Axle Seal For Toyota 7.5", 8" & V6 Rear

    from

    $42.99
    Outside axle seal for 7.5″, 8″ and V6 Toyota rear.Yukon Mighty seal.

    Product Features:
    • Rear outer axle seal
    • Fits Toyota 7.5″, 8″ with 4 cylinder engine, and V6
    See More

    National – Bearings (Part No.307-L)

    Bearings

    from

    $37.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Toyota 8" Front Straight Axle Heavy Duty Inner Seal (Part No.30343)

    Toyota 8" Front Straight Axle Heavy Duty Inner Seal

    from

    $22.99
    Toyota 8″ front straight axle heavy duty inner seal.

    Product Features:
    • Front inner axle seal
    • Fits Toyota 8″ with 4 cylinder engine
    • Extra heavy duty design
    See More

    Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

    Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

    from

    $51.99
    This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

    Product Features:
    • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
    • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
    • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Autopart International Inc – Wheel Seal (Part No.K80102049869API)

    Wheel Seal

    from

    $6.85
    Wheel Seal

    Yukon Gear – The Carrier Bearing Puller (Part No.56072)

    The Carrier Bearing Puller

    from

    $883.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    See More

    Dorman – Rear Drive Shaft: OE Fix (Part No.936-765)

    Rear Drive Shaft: OE Fix

    from

    $638.99
    The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

    Product Features:
    • Rear Driveshaft Assembly.
    • Rear Drive Shaft: OE Fix.
    • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
    • Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
    See More

    Yukon Gear – Axle Bearing Puller Tool (Part No.56065)

    Axle Bearing Puller Tool

    from

    $529.99
    Axle bearing puller tool (plate style) for Toyotas. The Yukon axle bearing Puller safely removes pressed on axle bearings for a variety of applications. Cutting a bearing off an axle can damage the axle and is potentially dangerous. The Yukon axle bearing Puller can be used with a press or with the Yukon carrier bearing Puller and an air-gun to safely and quickly remove bearings. No return.

    Product Features:
    • Axle bearing puller
    • Works with an impact gun or hydraulic press to safely and easliy remove axle bearings
    • Works on Toyota rear applications
    See More

    Autopart International Inc – Axle Assembly (Part No.K40001952752API)

    Axle Assembly

    from

    $138.08
    Axle Assembly

    SKF – Wheel Bearing (Part No.K8000323893SKF)

    Wheel Bearing

    from

    $105.89
    SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

    Product Features:
    • Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
    • 100% tested to the actual OE specifications per part number for fit, form and function
    • High quality steel and surface finishes
    • Proper implementation of heat treatment
    See More

    Yukon Gear – 1177, 7.5", 8", V6 Toyota Redi Sleeve, Saver For Seal Surface (Part No.30220)

    1177, 7.5", 8", V6 Toyota Redi Sleeve, Saver For Seal Surface

    from

    $65.99
    1177, 7.5″, 8″, V6 Toyota REDI sleeve, saver for seal surface.Yukon Mighty seal.

    Product Features:
    • Pinion Redi-sleeve
    • Fits Toyota 7.5″, 8″ and V6
    See More

    Yukon Gear – Toyota Bearing Retainer For ’01-’02 4Runner, ’01-’04 Tacoma & 00-’06 Tundra (Part No.33421)

    Toyota Bearing Retainer For '01-'02 4Runner, '01-'04 Tacoma & 00-'06 Tundra

    from

    $22.99
    Product Features:
    • Bearing retainer
    • Fits 2001-2002 Toyota 4Runner, 2001-2004 Tacoma and 2000-2006 Tundra
    See More

    NOK – Wheel Seal (Part No.K8010150214NOK)

    Wheel Seal

    from

    $8.87
    Wheel Seal

    NOK – Axle Seal (Part No.K402148816NOK)

    Axle Seal

    from

    $8.87
    NOK is Japan’s longest established oil seal manufacturer. Our functional parts such as oil seals and mechanical seals, created through advanced seal technology, are not only employed in the automotive industry but are also used in a wide range of other industries.

    Product Features:
    • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
    • The flanged design allows for easier and proper installation and helps avoid cocking.
    • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
    • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
    See More

    Yukon Gear – Toyota V6 Freeze Plug, 3/4" Thread (Part No.33464)

    Toyota V6 Freeze Plug, 3/4" Thread

    from

    $6.99
    Product Features:
    • Fill plug
    • Fits Toyota V6
    See More

    Nippon Reinz – Wheel Hub Gasket (Part No.K702363332NRZ)

    Wheel Hub Gasket

    from

    $2.58
    The Nippon Reinz Wheel Hub Gasket is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

    Product Features:
    • Premium Original Equipment replacement
    • Provides performance and dependability
    • Manufactured to meet OE specifications
    See More

    Top Picks for 1985 Toyota 4Runner Transfer Cases

    Upgrade Toyota 4Runners with top-quality Transfer Cases parts, including 8 OEM and aftermarket selections for your 1985 model.

    Driveworks – Tapered Roller Bearing (Part No.S-30306)

    Tapered Roller Bearing

    from

    $14.29
    Product Features:
    • Brand may vary by location
    See More

    National – Multi Purpose Seal (Part No.223840)

    Multi Purpose Seal

    from

    $6.29
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

    Tapered Cup Wheel Bearing Assembly

    from

    $8.49
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Driveworks – Taper Bearing Cone (Part No.S-JLM-104948)

    Taper Bearing Cone

    from

    $13.29
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Driveworks – Taper Bearing Cup (Part No.S-JLM-104910)

    Taper Bearing Cup

    from

    $4.99
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    National – Multi Purpose Seal (Part No.223253)

    Multi Purpose Seal

    from

    $17.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    FAG US – TAPERED ROLLER BEARI (Part No.30306A)

    TAPERED ROLLER BEARI

    from

    $60.99
    TAPERED ROLLER BEARI

    FAG US – CUP (Part No.JLM104910)

    CUP

    from

    $11.99
    CUP

    In-Demand Differentials for 1985 Toyota 4Runners

    Select from 145 premium Differentials parts for your 1985 Toyota 4Runner, with prices ranging from $5.99 to $1,566.99.

    Felpro – Differential Carrier Gasket (Part No.RDS 55431)

    Differential Carrier Gasket

    from

    $8.79
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    National – Bearings (Part No.32307)

    Bearings

    from

    $51.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Matched cup and cone components ensures consistent quality and outstanding performance
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.30025)

    Bearings

    from

    $89.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Matched cup and cone components ensures consistent quality and outstanding performance
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

    3 Qt - 80W90 Conventional Gear Oil With Posi Additive

    from

    $57.99
    3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

    Product Features:
    • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
    See More

    Needa Parts – Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack (Part No.090-030)

    Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack

    from

    $6.79
    This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug & help ensure a secure seal.

    Product Features:
    • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
    • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
    • Durable construction – designed and manufactured to strict specifications for reliable performance
    • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

    Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

    from

    $148.99
    Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

    Redline Synthetic "Shock Proof" Oil - 3 Quarts

    from

    $99.99
    Redline Synthetic “Shock Proof” Oil. 3 Quarts.

    Product Features:
    • Includes three quarts of Redline Shockproof oil
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1109)

    Differential Pinion Shim Kit

    from

    $13.49


    Product Features:
    • KIT SHIM TOYO TRK 79-92 REAR/89-92 FRONT
    See More

    Yukon Gear – Crush Sleeve (Part No.33101)

    Crush Sleeve

    from

    $13.99
    Crush Sleeve for GM 55-62 car & truck and Toyota 8″. 2.510″ long.

    Product Features:
    • Crush sleeve for 1955-1962 GM passenger car and Toyota 8″ with 4 cylinder engine
    • 2.510″ tall
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

    Redline Synthetic "Shock Proof" Oil - 4 Quarts

    from

    $137.99
    Redline Synthetic “Shock Proof” Oil. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil
    See More

    Yukon Gear – Toyota 8" & V6 Gasket (Part No.23028)

    Toyota 8" & V6 Gasket

    from

    $11.99
    Toyota 8″ & V6 gasket.

    Product Features:
    • Dropout gasket
    • Fits Toyota 8″ and V6
    See More

    Driveworks – Oil Seal (Part No.S-1177)

    Oil Seal

    from

    $9.49
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – Standard Open Carrier Case, Toyota 8" 4 Cylinder (Part No.20113)

    Standard Open Carrier Case, Toyota 8" 4 Cylinder

    from

    $189.99
    8″ standard Open case, bare.

    Product Features:
    • Standard open carrier case
    • Fits Toyota 8″ with 4 cylinder engine
    See More

    Yukon Gear – Crush Sleeve Eliminator Kit For Toyota 8" (Part No.55052)

    Crush Sleeve Eliminator Kit For Toyota 8"

    from

    $72.99
    8″ Toyota solid crush sleeve replacement spacer kit, preload.

    Product Features:
    • Crush sleeve eliminator kit for Toyota 8″ with 4 cylinder engine
    See More

    National – Bearings (Part No.KC-11445-Y)

    Bearings

    from

    $60.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Air Line Repair Kit, Zip Locker (Part No.34003)

    Air Line Repair Kit, Zip Locker

    from

    $52.99
    Air line repair kit, ZIP locker.

    Product Features:
    • Air line repair kit
    • Includes 20′ air line and two repair fittings
    See More

    Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

    Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

    from

    $39.99
    8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

    Product Features:
    • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
    See More

    Yukon Gear – T8 Side Bearing Adjuster Lock (Without Bolt) (Part No.33363)

    T8 Side Bearing Adjuster Lock (Without Bolt)

    from

    $11.99
    Product Features:
    • Side adjuster lock
    • Fits Toyota 8″ with 4 cylinder engine
    See More

    Yukon Gear – O-Ring For Toyota & Dana 44 Zip Locker Seal Housing (Part No.34004)

    O-Ring For Toyota & Dana 44 Zip Locker Seal Housing

    from

    $11.29
    Product Features:
    • O-ring for seal housing
    • Fits Dana Spicer 44 and Toyota 8″ and V6
    See More

    Dorman – Rear axle shaft kit for Toyota pickup (Part No.630-334)

    Rear axle shaft kit for Toyota pickup

    from

    $315.99
    Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

    Product Features:
    • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
    • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
    • Durable construction – designed to rigorous standards and tested to ensure performance
    • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
    See More

    USA Standard Gear – Ring and Pinion Kit (Part No.36331)

    Ring and Pinion Kit

    from

    $349.99
    Ring and Pinion Kit

    USA Standard Gear – Master Overhaul Kit for the ’85 and Older Toyota 8" Differential (Part No.37069)

    Master Overhaul Kit for the '85 and Older Toyota 8" Differential

    from

    $236.99
    USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

    Product Features:
    • Fits Toyota 8″ and 4 cylinder engine, 1985 and down or 1986 and up with aftermarket ring and pinion set
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
    See More

    USA Standard Gear – Spool For Toyota V6 (Part No.59012)

    Spool For Toyota V6

    from

    $271.99
    Product Features:
    • Full spool
    • Fits Toyota V6 rear
    See More

    USA Standard Gear – 8" Toyota Spartan Locker Cross Pin (Part No.17031)

    8" Toyota Spartan Locker Cross Pin

    from

    $49.99
    8″ Toyota Spartan locker cross pin.

    Product Features:
    • USA Standard Gear heavy-duty short cross pin shaft
    • Fits Toyota 8″ with 4 cylinder engine
    • Works with Spartan Locker or standard open spider gears
    See More

    NTN – BCA Wheel Bearing (Part No.K8000279217NTN)

    BCA Wheel Bearing

    from

    $81.95
    Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials and design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.

    Product Features:
    • For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
    • For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads and longer life.
    See More

    USA Standard Gear – Spartan Spring & Pin Kit, Fits Ford 9" & Toyota V6 (Part No.17045)

    Spartan Spring & Pin Kit, Fits Ford 9" & Toyota V6

    from

    $42.99
    Spartan spring & pin kit, fits Ford 9″ & Toyota V6

    Product Features:
    • Designed and engineered for off road performance
    • Chromoly drivers for added strength 
    • Heat treated and precision cut teeth
    • Spartan Locker is the toughest lunchbox locker on the market
    See More

    Yukon Gear – Pinion Seal For Toyota 7.5", 8", V6 & T100 (Part No.30005)

    Pinion Seal For Toyota 7.5", 8", V6 & T100

    from

    $19.99
    Pinion seal for 7.5″, 8″, V6, and T100 and Tacoma with lockers.Yukon Mighty seal.

    Product Features:
    • Pinion seal
    • Fits Toyota 7.5″, 8″ with 4 cylinder engine, V6, Landcruiser and Tacoma/T100 with factory locking differential
    See More

    Yukon Gear – 20 Long Air Line For Zip Locker (Part No.34002)

    20 Long Air Line For Zip Locker

    from

    $29.99
    20 long air line for Zip Locker.

    Product Features:
    • Air line
    • 20′ in length
    See More

    Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

    Replacement Pinion Depth Shims For Dana 60, 61 & D70-U

    from

    $17.99
    Product Features:
    • Pinion depth shims for Dana Spicer 60 and 70U
    See More

    Yukon Gear – Pinion Install Kit For Toyota V6 Rear Differential (Part No.13092)

    Pinion Install Kit For Toyota V6 Rear Differential

    from

    $299.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear. This kit fits applications with a 27 spline pinion.

    Product Features:
    • Fits Toyota V6 rear
    • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
    See More

    Motive Gear – Differential Bearing Kit – Timken (Part No.R11RT)

    Differential Bearing Kit - Timken

    from

    $150.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • TOYOTA 8″ BEARING AND SEAL KIT TIMKEN
    See More

    Yukon Gear – Outer Oil Slinger (Part No.33025)

    Outer Oil Slinger

    from

    $10.99
    Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.

    Product Features:
    • Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
    See More

    Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

    Bearing Race Driver Set, 21 Piece

    from

    $1566.99
    21 Piece bearing race driver set. (Box wt: 140lbs) No return.

    Product Features:
    • Bearing race driver set
    • 21 pieces
    • All steel construction
    See More

    Yukon Gear – Zip Locker For Toyota V6 (Part No.34034)

    Zip Locker For Toyota V6

    from

    $1356.99
    The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.

    Product Features:
    • Fits Toyota V6 rear
    • Forged case and 8620 internals for added strength
    • Works with a variety of air delivery systems
    • Assembled in the USA
    See More

    Yukon Gear – Zip Locker For Toyota 8" 4 Cylinder (Part No.34033)

    Zip Locker For Toyota 8" 4 Cylinder

    from

    $1324.99
    The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.

    Product Features:
    • Fits Toyota 8″ with 4 cylinder engine
    • Forged case and 8620 internals for added strength
    • Works with a variety of air delivery systems
    • Assembled in the USA
    See More

    Yukon Gear – Grizzly Locker For Toyota 8", 4 Cylinder (Part No.28019)

    Grizzly Locker For Toyota 8", 4 Cylinder

    from

    $959.99
    The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

    Product Features:
    • Fits Toyota 8″ with 4 cylinder engine
    • Patented internal design reduces common locker failures
    • 8620 internals for added strength
    • Assembled in the USA
    See More

    Yukon Gear – Standard Open Carrier Case, Toyota V6 (Part No.20110)

    Standard Open Carrier Case, Toyota V6

    from

    $794.99
    V6 standard Open case, bare.

    Product Features:
    • Standard open carrier case
    • Does not include spider gears
    • Fits Toyota V6
    See More

    Yukon Gear – Limited Slip Dffrntl (Part No.26057)

    Limited Slip Dffrntl

    from

    $769.99
    Limited Slip Dffrntl

    Yukon Gear – The Carrier Bearing Puller (Part No.56034)

    The Carrier Bearing Puller

    from

    $689.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
    See More

    USA Standard Gear – Spartan Locker for Toyota 8" Differential with 30 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17015)

    Spartan Locker for Toyota 8" Differential with 30 Spline Axles, Includes Heavy-duty Cross Pin Shaft

    from

    $679.99
    The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

    Product Features:
    • Fits Toyota 8″ with 4 cylinder engine
    • Made from 9310 steel for added strength
    • Replaces the spiders in a standard carrier case
    See More

    USA Standard Gear – Spartan Locker For Toyota V6 With 30 Spline Axles (Part No.17034)

    Spartan Locker For Toyota V6 With 30 Spline Axles

    from

    $549.99
    The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

    Product Features:
    • Fits Toyota 8″ and V6
    • Made from 9310 steel for added strength
    • Works with stock side gears in standard carrier case
    See More

    Yukon Gear – Toyota V6 Dropout Case, All New, Includes Adjusters (Part No.32095)

    Toyota V6 Dropout Case, All New, Includes Adjusters

    from

    $534.99
    Product Features:
    • Fits Toyota V6 rear
    • Fits ABS and non-ABS applications
    See More

    Yukon Gear – 8" Reverse High-Pinion Toyota Drop Out (Part No.32298)

    8" Reverse High-Pinion Toyota Drop Out

    from

    $529.99
    8″ Reverse high-pinion Toyota Drop Out (fits 8″ Housing) .

    Product Features:
    • Fits Toyota Landcruiser reverse rotation front
    See More

    USA Standard Gear – Master Overhaul Kit for the Toyota V6 & Turbo 4 Differential, ’02 & down (Part No.37071)

    Master Overhaul Kit for the Toyota V6 & Turbo 4 Differential, '02 & down

    from

    $519.99
    USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket. This kit fits applications with a 27 spline pinion.

    Product Features:
    • Fits Toyota V6 rear
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
    See More

    Yukon Gear – Bearing Install Kit For Toyota Turbo 4 And V6 Differential With 27 Spline Pinion (Part No.11092)

    Bearing Install Kit For Toyota Turbo 4 And V6 Differential With 27 Spline Pinion

    from

    $504.99
    Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses high quality bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear. This kit fits applications with a 27 spline pinion.

    Product Features:
    • Fits Toyota V6 rear
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.
    See More

    USA Standard Gear – Master Overhaul Kit For The Toyota V6, ’03 & Up (Part No.37088)

    Master Overhaul Kit For The Toyota V6, '03 & Up

    from

    $494.99
    USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket. This kit fits applications with a 29 spline pinion.

    Product Features:
    • Fits Toyota V6
    • 29 spline only
    • Uses Koyo bearings and races
    • Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and gasket.
    See More

    Yukon Gear – Master Overhaul Kit For Toyota V6, ’03 & Up (Part No.14210)

    Master Overhaul Kit For Toyota V6, '03 & Up

    from

    $459.99
    Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses a solid spacer to replace the crush sleeve. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. This kit fits applications with a 29 spline pinion.

    Product Features:
    • Fits Toyota V6 rear
    • Included are KOYO bearings and races along with high quality seals and small parts.
    • Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve eliminator, thread locker, marking compound with brush, and gasket.
    See More

    USA Standard Gear – Master Overhaul Kit For The Toyota V6, ’03 & Up (Part No.37075)

    Master Overhaul Kit For The Toyota V6, '03 & Up

    from

    $429.99
    USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket. This kit fits applications with a 29 spline pinion.

    Product Features:
    • Fits Toyota V6 rear
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve eliminator, oil baffles and slingers, thread locker, marking compound and brush.
    See More

    Most Sold 1985 Toyota 4Runner Universal Joints

    Explore our best-selling Toyota parts for the 1985 4Runner among 14 OEM and aftermarket options starting from $6.99.

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.285)

    Greaseable Super Strength Universal Joint

    from

    $35.99
    Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
    • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.387)

    Greaseable Premium Universal Joint

    from

    $25.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    Driveworks – Universal Joint (Part No.DW-387)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.287)

    Non-Greaseable Super Strength Universal Joint

    from

    $27.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    Spicer – Universal Joint (Part No.5-1510X)

    Universal Joint

    from

    $62.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.513)

    Greaseable Premium Universal Joint

    from

    $37.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    Yukon Gear – U/Joint For Many Toyota Applications (Part No.42007)

    U/Joint For Many Toyota Applications

    from

    $76.99
    Yukon U/Joint for many Toyota applications. 2.047″ snap ring span, 1.142″ cap diameter. Inside snap ring.
    See More

    Spicer – Greasable U-Joint (Part No.K1010991371SPI)

    Greasable U-Joint

    from

    $72.43
    Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they’re pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, as well as greasable and non-greasable styles. Order the model designed for fitment with your vehicle and engine type.

    Product Features:
    • Forged cross
    • Lubeable
    • O.E.M replacement
    • Snap rings
    See More

    Yukon Gear – 12 Hole Yoke For ’83 And Newer Toyota 8" And V6 With 27 Splines (Part No.41105)

    12 Hole Yoke For '83 And Newer Toyota 8" And V6 With 27 Splines

    from

    $109.99
    Yukon 12 hole yoke for ’83 and newer Toyota 8″ and V6 with 27 splines. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Toyota 8″ and V6
    • 27 spline
    • Round companion flange
    See More

    Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion (Part No.41206)

    Yoke For Toyota V6 Rear With 29 Spline Pinion

    from

    $123.99
    Product Features:
    • Fits Toyota V6 rear
    • Conversion yoke for 29 spline gears
    • 29 spline pinion
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-533)

    Differential Pinion Yoke Assembly

    from

    $87.99
    A worn or damaged differential pinion flange can lead to driveline vibrations and fluid leaks. This part is designed to match the performance of the original equipment pinion flange on specified vehicles. It has been engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is rusted, worn or damaged. It is made of rugged materials for reliable service and durability.

    Product Features:
    • Direct replacement – this differential pinion flange is designed to match the performance of the original equipment flange on specified vehicles.
    • Ideal solution – engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is worn or damaged.
    • Durable construction – designed and manufactured to strict specifications for reliable performance
    • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    Autopart International Inc – U Joint (Part No.K10101977486API)

    U Joint

    from

    $19.40
    U Joint

    Brute Force – Universal Joint (Part No.1-1612BF)

    Universal Joint

    from

    $8.09
    Universal Joint – Brute Force
    See More

    Neapco – Universal Joint (Part No.1-1612)

    Universal Joint

    from

    $6.99
    Universal Joint
    See More

    Top-Rated Drivetrains Brands For Your 1985 Toyota 4Runner

    Shop for the best-rated brands offering Drivetrains and other products for your 1985 Toyota 4Runners. Below you’ll find some of our best rated Drivetrains from Moog and Driveworks, and more. Drivetrains from these brands that fit a 1985 4Runner start at just $4.99 and are rated as high as 4 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

    Popular Moog 1985 Toyota 4Runner Drivetrains

    When it comes to maintaining or upgrading your 1985 Toyota 4Runner, using quality Drivetrains is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Drivetrains, specifically designed for the 1985 Toyota 4Runner. With over 4 Moog brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $25.99, with an average price of just $31.99. Plus, with over 14 customer reviews and an average rating of 4 stars, you can trust that our Moog Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Greaseable Premium Universal Joint
    from
    $37.99
    This product is not rated

    Greaseable Premium Universal Joint

    “”

    Greaseable Super Strength Universal Joint
    from
    $35.99

    (4)

    Greaseable Super Strength Universal Joint

    “My rear drive shaft had developed a clunk on my 93 4runner 4×4. Went underneath the truck gave the driveshaft some movement with a pry bar and sure en”

    Non-Greaseable Super Strength Universal Joint
    from
    $27.99
    This product is not rated

    Non-Greaseable Super Strength Universal Joint

    “”

    Popular Driveworks 1985 Toyota 4Runner Drivetrains

    Driveworks auto parts is one of the highest quality Drivetrain brands in the market. Any 1985 Toyota 4Runner owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1985 4Runner, Advance Auto Parts carries a full inventory of 6 Driveworks Drivetrains. Plus you will be keeping your Toyota in peak condition while saving money because prices on these Driveworks Drivetrains range from $4.99 to $15.99, plus, with more than 7 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

    Taper Bearing Cone
    from
    $13.29
    This product is not rated

    Taper Bearing Cone

    “”

    Tapered Cup Wheel Bearing Assembly
    from
    $8.49
    This product is not rated

    Tapered Cup Wheel Bearing Assembly

    “”

    Taper Bearing Cup
    from
    $4.99
    This product is not rated

    Taper Bearing Cup

    “”

    FAQs for 1985 Toyota 4Runner Drivetrains

    Which Drivetrains are best-sellers for 1985 Toyota 4Runners?

    Out of 192 Drivetrains that fit 1985 Toyota 4Runners, the following parts are the top sellers:

    What’s the price range for 1985 Toyota 4Runner Drivetrains?

    Drivetrain prices for the 1985 Toyota 4Runner start at $2.58 and go up to $1,566.99 for the most premium parts.

    What’s the average price of a Drivetrain for a 1985 Toyota 4Runner?

    The average price for Drivetrains for the 1985 Toyota 4Runner is $205.61. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Drivetrains for other Toyota 4Runner model years?

    Yes, we currently carry Drivetrains for 40 model years of Toyota 4Runners between 1984 and 2024. Drivetrains are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

    What are the cheapest Drivetrains for my 1985 Toyota 4Runner?

    The cheapest 1985 Toyota 4Runner Drivetrains we carry in stock are:

    What are the top-rated Drivetrains that fit the 1985 Toyota 4Runner?

    Out of 54 reviews by customers, our 1985 Toyota 4Runner Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1985 Toyota 4Runner and their top-rated products:

    What types of Drivetrains do you sell for my 1985 Toyota 4Runner?

    As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 1985 Toyota 4Runner:

    Can I get help with 1985 Toyota 4Runner Drivetrain orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Drivetrains and more.

    What is your return policy for Toyota 4Runner Drivetrains?

    Advance Auto Parts keeps returns simple. For new Toyota 4Runner Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.