2005 Toyota 4Runner Drivetrains

Essential 2005 Toyota 4Runner Drivetrains

Yukon Gear – T100 Rear Differential With ABS Fits 01-02 4Runner, 01-04 Tacoma, 00-06 Tundra (Part No.10059)

T100 Rear Differential With ABS Fits 01-02 4Runner, 01-04 Tacoma, 00-06 Tundra

from

$298.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. T100 rear differential W/ ABS fits 01-02 4Runner, 01-04 Tacoma, 00-06 Tundra. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for 2001-2002 4Runner, 2001-2004 Tacoma and 2000-2006 Tundra rear
  • Includes axle bearing, inner and outer axle seals and snap ring
  • This kit will work with ABS applications
  • Services one side
See More

Yukon Gear – Pinion Install Kit For Toyota V6 Rear Differential (Part No.13092)

Pinion Install Kit For Toyota V6 Rear Differential

from

$299.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear. This kit fits applications with a 27 spline pinion.

Product Features:
  • Fits Toyota V6 rear
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Corteco – Pinion Seal (Part No.J7010163867CFW)

Pinion Seal

from

$7.11
Pinion Seal

Yukon Gear – 12 Hole Yoke For ’83 And Newer Toyota 8" And V6 With 27 Splines (Part No.41105)

12 Hole Yoke For '83 And Newer Toyota 8" And V6 With 27 Splines

from

$109.99
Yukon 12 hole yoke for ’83 and newer Toyota 8″ and V6 with 27 splines. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Toyota 8″ and V6
  • 27 spline
  • Round companion flange
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – Toyota 8" & V6 Gasket (Part No.23028)

Toyota 8" & V6 Gasket

from

$11.99
Toyota 8″ & V6 gasket.

Product Features:
  • Dropout gasket
  • Fits Toyota 8″ and V6
See More

Yukon Gear – Yoke For Toyota 7.5" IFS (And ’85 And Newer Rear) With 23 Spline Pinion (Part No.41106)

Yoke For Toyota 7.5" IFS (And '85 And Newer Rear) With 23 Spline Pinion

from

$246.99
Yukon yoke for Toyota 7.5″ IFS (and ’85 and newer rear) with 23 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Toyota 7.5″
  • 23 spline
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010182694EMP)

RE CV Joint Boot Kit

from

$31.23
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

from

$39.99
8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:
  • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
See More

Yukon Gear – Minor Install Kit For Toyota ’85 And Older Or Aftermarket 8" Differential (Part No.12072)

Minor Install Kit For Toyota '85 And Older Or Aftermarket 8" Differential

from

$51.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Toyota 8″ with 4 cylinder engine
  • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
See More

Yukon Gear – Zip Locker Install Kit (Part No.34026)

Zip Locker Install Kit

from

$249.99
Product Features:
  • Installation kit
  • Includes o-ring for bulkhead fitting, bulkhead fitting, outer fitting, switch, front and rear switch cover, solenoid, zip ties and 20′ air line
See More

Yukon Gear – Toyota 8" & V6 Pinion Nut Washer (Part No.33168)

Toyota 8" & V6 Pinion Nut Washer

from

$16.99
Toyota 8″ & V6 pinion nut washer.

Product Features:
  • Pinion nut for Toyota 8″ and V6
See More

National – Multi Purpose Seal (Part No.223253)

Multi Purpose Seal

from

$17.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Toyota V6 Cross Pin Shaft (Part No.33416)

Toyota V6 Cross Pin Shaft

from

$298.99
Product Features:
  • Cross pin shaft
  • Fits Toyota V6
See More

USA Standard Gear – Ring and Pinion Kit (Part No.36331)

Ring and Pinion Kit

from

$349.99
Ring and Pinion Kit

Yukon Gear – Seal Housing For Toyota Zip Locker (Part No.34011)

Seal Housing For Toyota Zip Locker

from

$78.99
Product Features:
  • Seal housing for Toyota 8″ and V6
  • Includes o-rings
See More

Yukon Gear – Toyota 7.5 Pinion Nut (Part No.33155)

Toyota 7.5 Pinion Nut

from

$9.99
Toyota 7.5 pinion nut (M18x1.5).

Product Features:
  • Pinion nut for Toyota 7.5″
  • 18mm x 1.5 thread
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

AISIN – Transfer Case Motor (Part No.J7100795240ASC)

Transfer Case Motor

from

$1103.75
Transfer Case Motor

National – Multi Purpose Seal (Part No.710319)

Multi Purpose Seal

from

$8.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Dorman – Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter (Part No.614-003)

Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter

from

$32.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R11RV6MK)

Differential Master Bearing Kit - Koyo

from

$217.99


Product Features:
  • KIT BRG & SEAL MSTR TOYOTA 8″ V6 &
See More

National – Multi Purpose Seal (Part No.224820)

Multi Purpose Seal

from

$7.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Oil Baffle (Part No.33007)

Oil Baffle

from

$7.99
Oil baffle for Toyota Landcruiser reverse rotation front, 8″ IFS front & TV6/Tacoma rear with factory locker.

Product Features:
  • Oil baffle
  • Fits Toyota Landcruiser reverse rotation front
See More

Dorman – 4WD Axle Actuator Assembly (Part No.600-488)

4WD Axle Actuator Assembly

from

$448.99
This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:
  • Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models
  • Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator
  • Smart solution – delivers reliable fit and function for competitive price
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Yukon Gear – Oil Slinger For Toyota 29 Spline Rear Pinion & Clamshell Front (Part No.33026)

Oil Slinger For Toyota 29 Spline Rear Pinion & Clamshell Front

from

$23.99
Toyota 29spl V6 and clamshell front, outer oil slinger.

Product Features:
  • Outer slinger
  • Fits Toyota 8″ clamshell front
See More

Corteco – Axle Seal (Part No.K4021473844CFW)

Axle Seal

from

$8.51
Axle Seal

Yukon Gear – V6 Standard Open Pinion Gear Thrust Washer (Part No.33393)

V6 Standard Open Pinion Gear Thrust Washer

from

$10.99
V6 standard Open pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer
  • Fits Toyota V6
See More

Popular 2005 Toyota 4Runner Drivetrains Categories

2005 Toyota 4Runner Drivetrains

You count on your 2005 Toyota 4Runner to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 168 Drivetrains ranging in price from $2.99 to $1,356.99, you’re sure to find everything you need for your 2005 Toyota 4Runner.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 21 different brands like Valvoline, Carquest Premium, and Moog. 2005 Toyota 4Runner Drivetrains start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 3,834 extensive product reviews on 2005 Toyota 4Runner Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.3 stars and Multi Purpose Seal with 4.0 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2005 Toyota 4Runner below to get started!

Top-Rated Drivetrains Brands For Your 2005 Toyota 4Runner

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Toyota 4Runner running right for years to come. In our inventory you’ll find brands like Valvoline, Carquest Premium, Moog, and even more.

Popular Valvoline Drivetrains

You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2005 Toyota 4Runner back on the road. Some of the top-rated Valvoline products in these categories are:
ATF for Mercon®V Applications Conventional, 1 Quart
from $12.99
(120)
ATF for Mercon®V Applications Conventional, 1 Quart
Differential Oil

FAQs for 2005 Toyota 4Runner Drivetrains

What are the most purchased Drivetrains for the 2005 Toyota 4Runner?

Out of 168 Drivetrains for the 2005 Toyota 4Runner, the most popular in our inventory are:
CV Axle Shaft Assembly
from $147.99
(38)
CV Axle Shaft Assembly
Drive Shaft and Axles
Greaseable Premium Universal Joint
from $25.99
(10)
Greaseable Premium Universal Joint
U-Joints
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil

What are the top-rated 2005 Toyota 4Runner Drivetrains?

Top-rated Drivetrains for your 2005 Toyota 4Runner based on customer reviews/ratings are:
Universal Joint
from $15.99
(6)
Universal Joint
“Good quality,excellent price”
Multi Purpose Seal
from $10.79
(5)
Multi Purpose Seal
“Good”
Greaseable Super Strength Universal Joint
from $35.99
(4)
Greaseable Super Strength Universal Joint
“My rear drive shaft had developed a clunk on my 93 4runner 4×4. Went underneath the truck gave the driveshaft some movement with a pry bar and sure en”