2004 Toyota 4Runner Drivetrains
More 2004 Toyota 4Runner Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2004 Toyota 4Runner, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2004 Toyota 4Runner Drivetrains
Yukon Gear – Pinion Flange Dust Shield For Toyota 8" Clamshell Front (Part No.33548)
Yukon Gear – Pinion Install Kit For Toyota Clamshell Design Front Reverse Rotation Differential (Part No.13102)
from
$353.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Toyota 8″ clamshell front
- Reverse rotation only
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Driveworks – Taper Bearing Cone (Part No.S-HM-88649)
from
$19.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – 7.5", 8", & V6 Rear Axle Bearing Snap Ring / Retainer Clip (Part No.33373)
EMPI – RE CV Joint Boot Kit (Part No.K6010182697EMP)
from
$25.45
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Yukon Gear – Grizzly Locker For Toyota 8", 4 Cylinder (Part No.28019)
from
$959.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!
Product Features:
See More
Product Features:
- Fits Toyota 8″ with 4 cylinder engine
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Yukon Gear – Differential Crush S (Part No.55081)
from
$73.99
Differential Crush S
Yukon Gear – 1177, 7.5", 8", V6 Toyota Redi Sleeve, Saver For Seal Surface (Part No.30220)
from
$65.99
1177, 7.5″, 8″, V6 Toyota REDI sleeve, saver for seal surface.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits Toyota 7.5″, 8″ and V6
Yukon Gear – Axle Bearing Puller Tool (Part No.56065)
from
$529.99
Axle bearing puller tool (plate style) for Toyotas. The Yukon axle bearing Puller safely removes pressed on axle bearings for a variety of applications. Cutting a bearing off an axle can damage the axle and is potentially dangerous. The Yukon axle bearing Puller can be used with a press or with the Yukon carrier bearing Puller and an air-gun to safely and quickly remove bearings. No return.
Product Features:
See More
Product Features:
- Axle bearing puller
- Works with an impact gun or hydraulic press to safely and easliy remove axle bearings
- Works on Toyota rear applications
Spicer – Universal Joint (Part No.5-1510X)
from
$62.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Yukon Gear – Toyota 8" & V6 Pinion Nut Washer (Part No.33168)
from
$16.99
Toyota 8″ & V6 pinion nut washer.
Product Features:
See More
Product Features:
- Pinion nut for Toyota 8″ and V6
Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota In A Ratio (Part No.24651)
from
$419.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits Toyota V6 rear
- 4.88 ratio
- 29 spline pinion
- Includes conversion yoke, seal, and pinion nut
Yukon Gear – Bearing Kit For ’85 & Down Toyota 8" And All Aftermarket 27 Spline Ring & Pinion With Zip Locker (Part No.11117)
from
$265.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits Toyota 8″ and 4 cylinder engine, 1985 and down or 1986 and up with aftermarket ring and pinion set and air operated locker
- Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69142)
from
$131.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Yukon Gear – Spindle Nut Kit For Toyota Front (Part No.33513)
National – Shaft Repair Sleeve (Part No.99166)
from
$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
AISIN – Transfer Case Motor (Part No.J7100795240ASC)
from
$1103.75
Transfer Case Motor
Dorman – Transfer Case Shift Fork (Part No.600-565)
from
$95.99
Shift fork pads degraded? This transfer case shift fork directly replaces the original equipment on certain vehicle applications to properly restore four-wheel drive functionality.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case shift fork matches the fit and function of the original fork on certain vehicle years, makes and models
- Effective fix – restores proper 4WD operation after original fork pads degrade
- Durable construction – built for reliable longevity, free of defects in materials and craftmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
Dorman – Rear Drive Shaft: Greaseable, Adjustable, OE Fix (Part No.936-775)
from
$637.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.
Product Features:
See More
Product Features:
- Rear Driveshaft Assembly
- Rear Drive Shaft: Greaseable, Adjustable, OE Fix
- Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion (Part No.41206)
from
$123.99
Product Features:
See More
- Fits Toyota V6 rear
- Conversion yoke for 29 spline gears
- 29 spline pinion
Yukon Gear – Toyota Landcruiser Pinion Nut, Coarse Spline (Part No.33158)
from
$15.99
Toyota Landcruiser pinion nut, coarse spline, LARGE. 22mm x 1.5mm.
Product Features:
See More
Product Features:
- Pinion nut
- Fits Toyota Landcruiser with 10 spline pinion
Yukon Gear – Outer Oil Slinger (Part No.33025)
from
$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.
Product Features:
See More
Product Features:
- Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
Yukon Gear – Solid Preload Kit For Toyota Landcruiser (Part No.55065)
from
$30.99
Preload shim kit for Toyota Landcruiser. Also compatible with Toyota 8″ 4 cylinder & V6 with a solid spacer.
Product Features:
See More
Product Features:
- Preload shim kit
- Fits 9.5″ Toyota Landcruiser
Yukon Gear – Toyota 8" & V6 Gasket (Part No.23028)
National – Multi Purpose Seal (Part No.710595)
from
$20.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – 8" Standard Open Pinion Gear Thrust Washer (Part No.33392)
from
$7.99
8″ standard Open pinion gear Thrust washer.
Product Features:
See More
Product Features:
- Pinion gear thrust washer
- Fits Toyota 8″ with 4 cylinder engine
Corteco – Axle Seal (Part No.K4021473844CFW)
from
$8.51
Axle Seal
National – Multi Purpose Seal (Part No.710254)
from
$2.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Popular 2004 Toyota 4Runner Drivetrains Categories
2004 Toyota 4Runner Drivetrains
You count on your 2004 Toyota 4Runner to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 164 Drivetrains ranging in price from $2.99 to $1,356.99, you’re sure to find everything you need for your 2004 Toyota 4Runner.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 19 different brands like Valvoline, Carquest Premium, and Moog. 2004 Toyota 4Runner Drivetrains start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 3,828 extensive product reviews on 2004 Toyota 4Runner Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.3 stars and Multi Purpose Seal with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2004 Toyota 4Runner below to get started!
Top-Rated Drivetrains Brands For Your 2004 Toyota 4Runner
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Toyota 4Runner running right for years to come. In our inventory you’ll find brands like Valvoline, Carquest Premium, Moog, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2004 Toyota 4Runner back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2004 Toyota 4Runner Drivetrains
What are the most purchased Drivetrains for the 2004 Toyota 4Runner?
Out of 164 Drivetrains for the 2004 Toyota 4Runner, the most popular in our inventory are:
What are the top-rated 2004 Toyota 4Runner Drivetrains?
Top-rated Drivetrains for your 2004 Toyota 4Runner based on customer reviews/ratings are:
from
$35.99
(4)
Greaseable Super Strength Universal Joint
“My rear drive shaft had developed a clunk on my 93 4runner 4×4. Went underneath the truck gave the driveshaft some movement with a pry bar and sure en”
