2009 Toyota 4Runner Drivetrains
More 2009 Toyota 4Runner Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2009 Toyota 4Runner, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2009 Toyota 4Runner Drivetrains
Valvoline – ATF for Mercon®V Applications Conventional, 1 Quart (Part No.822345)
from
$12.99
Valvoline ATF for MERCON®V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON®SP, MERCON®LV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON®V, MERCON®, DEXRON®-III, DEXRON®-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON® or MERCON® fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion (Part No.41206)
from
$123.99
Product Features:
See More
- Fits Toyota V6 rear
- Conversion yoke for 29 spline gears
- 29 spline pinion
Yukon Gear – Pinion Flange Dust Shield For Toyota 8" Clamshell Front (Part No.33548)
Yukon Gear – Seal Housing For Toyota Zip Locker (Part No.34011)
Yukon Gear – Toyota 8" & V6 Gasket (Part No.23028)
National – Multi Purpose Seal (Part No.710254)
from
$2.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
EMPI – RE CV Joint Boot Kit (Part No.K6010411862EMP)
from
$36.56
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
National – Multi Purpose Seal (Part No.225875)
from
$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99147)
from
$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
AISIN – Transfer Case Motor (Part No.J7100795240ASC)
from
$1103.75
Transfer Case Motor
Yukon Gear – Master Overhaul Kit For Toyota 7.5" IFS Differential, V6 (Part No.14176)
from
$407.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Includes side shims and seals.
Product Features:
See More
Product Features:
- Fits standard rotation Toyota 7.5″ front with 6 cylinder engine
- Included are Timken bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and silicone.
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Yoke For Toyota 8" IFS Clamshell Design, ’07 & Up FJ, 05 & Up Tacoma, T100 Tundra (Part No.41176)
from
$245.99
Yukon yoke for Toyota 8″ IFS clamshell design, ’07 & up FJ, 05 & up Tacoma, T100 Tundra. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Toyota 8″ clamshell front
- 29 spline
- 66mm x 66mm bolt pattern
Autopart International Inc – Axle Assembly (Part No.K40001952752API)
from
$138.08
Axle Assembly
Yukon Gear – Oil Baffle (Part No.33007)
from
$7.99
Oil baffle for Toyota Landcruiser reverse rotation front, 8″ IFS front & TV6/Tacoma rear with factory locker.
Product Features:
See More
Product Features:
- Oil baffle
- Fits Toyota Landcruiser reverse rotation front
Yukon Gear – Crush Sleeve Eliminator Kit For Toyota 8" (Part No.55052)
from
$72.99
8″ Toyota solid crush sleeve replacement spacer kit, preload.
Product Features:
See More
Product Features:
- Crush sleeve eliminator kit for Toyota 8″ with 4 cylinder engine
Dorman – Transfer Case Shift Fork (Part No.600-565)
from
$95.99
Shift fork pads degraded? This transfer case shift fork directly replaces the original equipment on certain vehicle applications to properly restore four-wheel drive functionality.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case shift fork matches the fit and function of the original fork on certain vehicle years, makes and models
- Effective fix – restores proper 4WD operation after original fork pads degrade
- Durable construction – built for reliable longevity, free of defects in materials and craftmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
Yukon Gear – U/Joint For Many Toyota Applications (Part No.42007)
from
$76.99
Yukon U/Joint for many Toyota applications. 2.047″ snap ring span, 1.142″ cap diameter. Inside snap ring.
See More
USA Standard Gear – Master Overhaul Kit For The Toyota V6, ’03 & Up (Part No.37088)
from
$494.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket. This kit fits applications with a 29 spline pinion.
Product Features:
See More
Product Features:
- Fits Toyota V6
- 29 spline only
- Uses Koyo bearings and races
- Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and gasket.
Yukon Gear – Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (Part No.33061)
from
$6.99
Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).
Product Features:
See More
Product Features:
- Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
- 5 needed
Yukon Gear – Toyota 8" & V6 Pinion Nut Washer (Part No.33168)
from
$16.99
Toyota 8″ & V6 pinion nut washer.
Product Features:
See More
Product Features:
- Pinion nut for Toyota 8″ and V6
Yukon Gear – Axle Bearing Puller Tool (Part No.56065)
from
$529.99
Axle bearing puller tool (plate style) for Toyotas. The Yukon axle bearing Puller safely removes pressed on axle bearings for a variety of applications. Cutting a bearing off an axle can damage the axle and is potentially dangerous. The Yukon axle bearing Puller can be used with a press or with the Yukon carrier bearing Puller and an air-gun to safely and quickly remove bearings. No return.
Product Features:
See More
Product Features:
- Axle bearing puller
- Works with an impact gun or hydraulic press to safely and easliy remove axle bearings
- Works on Toyota rear applications
Yukon Gear – V6 Side Bearing Adjuster Lock (Without Bolt) (Part No.33364)
Yukon Gear – Differential (Part No.26051)
from
$782.99
Differential
Yukon Gear – Air Line Repair Kit, Zip Locker (Part No.34003)
from
$52.99
Air line repair kit, ZIP locker.
Product Features:
See More
Product Features:
- Air line repair kit
- Includes 20′ air line and two repair fittings
Dorman – Front Wheel Bearing Hub Nut (Part No.926-263)
from
$23.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Shaft Repair Sleeve (Part No.99166)
from
$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)
from
$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 2009 Toyota 4Runner Drivetrains Categories
2009 Toyota 4Runner Drivetrains
You count on your 2009 Toyota 4Runner to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 167 Drivetrains ranging in price from $2.99 to $1,356.99, you’re sure to find everything you need for your 2009 Toyota 4Runner.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 19 different brands like Valvoline, Carquest Premium, and Moog. 2009 Toyota 4Runner Drivetrains start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 3,834 extensive product reviews on 2009 Toyota 4Runner Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.3 stars and Multi Purpose Seal with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2009 Toyota 4Runner below to get started!
Top-Rated Drivetrains Brands For Your 2009 Toyota 4Runner
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2009 Toyota 4Runner running right for years to come. In our inventory you’ll find brands like Valvoline, Carquest Premium, Moog, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2009 Toyota 4Runner back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2009 Toyota 4Runner Drivetrains
What are the most purchased Drivetrains for the 2009 Toyota 4Runner?
Out of 167 Drivetrains for the 2009 Toyota 4Runner, the most popular in our inventory are:
What are the top-rated 2009 Toyota 4Runner Drivetrains?
Top-rated Drivetrains for your 2009 Toyota 4Runner based on customer reviews/ratings are:
from
$35.99
(4)
Greaseable Super Strength Universal Joint
“My rear drive shaft had developed a clunk on my 93 4runner 4×4. Went underneath the truck gave the driveshaft some movement with a pry bar and sure en”
