2024 Toyota 4Runner Drivetrains
Find Your Specific 2024 Toyota 4Runner Drivetrains
Below you will find various in-demand Toyota Drivetrains, components and accessories for your 2024 4Runner. Advance Auto Parts has popular 4Runner parts like Drive Shafts and Axles, Universal Joints, Spindles and more. You’ll also find aftermarket and OEM Drivetrains for other 4Runner model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2024 Toyota 4Runner Drivetrains below and start saving instantly.
Popular 2024 Toyota 4Runner Drivetrains Categories
Essential Drivetrains for 2024 Toyota 4Runners
Dorman – Pre-Pressed Axle (OE Fix) (Part No.926-138)
from
$868.99
Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.
Product Features:
See More
Product Features:
- Easier installation – this loaded axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box
- Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
- Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
Dorman – Pre-Pressed Axle (OE Fix) (Part No.926-141)
from
$868.99
Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.
Product Features:
See More
Product Features:
- Easier installation – this loaded axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box
- Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
- Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
- Trustworthy quality – backed by engineers and inspectors in the United States, with decades of aftermarket experience
Yukon Gear – T8 30Spline Axle (24.64" – 29.08" Cut2Lth) 4340 – 106Mm Brake Pilot (Part No.21724)
from
$274.99
T8 30spline axle ’86-00 (24.64″ – 29.08″ CUT2LTH) 4340.
Product Features:
See More
Product Features:
- Fits 1979-2000 Toyota 8″ and V6 rear
- 4340 Chromoly
- 30 spline
- 29 1/8″ long
- Cut to length design fits 26.62″-29.26″ applications
- 106mm brake pilot
Dorman – Axle Shaft (Part No.630-500)
from
$298.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.
Product Features:
See More
Product Features:
- Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
- Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
- Durable construction – designed to rigorous standards and tested to ensure performance
- Trustworthy solution – backed by team of engineers and quality control specialists in the United States
Dorman – Wheel Bearing Hub Nut (Part No.926-263)
from
$29.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Spindle Nut Kit For Toyota Front (Part No.33513)
Dorman – 1-Piece Steel Driveshaft Assembly (OE Fix) (Part No.936-776)
from
$602.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance.
Product Features:
See More
Product Features:
- Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
- All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Cardone – Drive Shaft: Greaseable, Direct Replacement (Part No.65-5041)
from
$401.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100 percent dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9915)
from
$745.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100 percent dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-5018)
from
$797.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100 percent dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Dorman – 1-Piece Steel Driveshaft Assembly (OE Fix) (Part No.936-742)
from
$698.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance.
Product Features:
See More
Product Features:
- Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
- All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69073)
from
$160.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69170XD)
from
$211.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69142)
from
$145.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69170)
from
$154.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.513)
from
$37.99
Product Features:
See More
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Driveworks – Universal Joint (Part No.DW-387)
from
$25.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.285)
from
$35.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Spicer – Universal Joint, Greaseable Toyota Series ISR (Part No.5-1510X)
from
$62.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Product Features:
See More
Product Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
Yukon Gear – U/Joint For Many Toyota Applications (Part No.42007)
from
$76.99
Yukon U/Joint for many Toyota applications. 2.047″ snap ring span, 1.142″ cap diameter. Inside snap ring.
See More
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.287)
from
$31.49
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)
from
$18.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.
Product Features:
See More
Product Features:
- FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations.
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
- MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)
from
$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands of many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON*, DEXRON*-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Mobil 1 – 75W-90 Full Synthetic Gear Lubricant, Extends Gear Life, 1 Quart (Part No.26101)
from
$19.99
Mobil 1 Synthetic Gear Lubricant LS 75W-90 is a supreme, multi-purpose automotive gear lubricant that helps to provide exceptional thermal stability and resistance to high temperature oxidation, extending gear life due to minimal deposits. Helps to deliver outstanding protection against low speed/high torque wear with the capability to handle severe driving conditions while delivering smooth efficient performance. Mobil 1 Synthetic Gear Lubricant LS provides exceptional shear stability, corrosion protection, and enhanced frictional properties. Compared to conventional hypoid gear lubricants, Mobil 1 LS 75W-90 performs exceptionally over a wide range of temperatures to reduce wear at start up. Mobil 1 gear lube helps to minimize leakage and reduce contamination while providing good resistance to foaming to maintain film strength for reliable lubrication. Meets or exceeds the requirements of the following industry specifications: API GL-5.
Product Features:
See More
Product Features:
- Mobil 1 LS synthetic automotive gear lubricant exceeds the highest level of performance requirements of modern passenger vehicles
- Helps to provide exceptional thermal stability and resistance to high temperature oxidation and extend gear life due to minimal deposits
- Delivers outstanding protection against low speed/high torque wear, handling severe driving conditions with smooth, efficient performance
- Compared to conventional hypoid gear lubricants, performs exceptionally over a wide range of temperatures to reduce wear at start up
- Provides exceptional shear stability, corrosion protection, and enhanced frictional properties
- Manufacturer Part Number: 104361
Idemitsu – Type TLS-LV Automatic Transmission Fluid, 1 Quart (Part No.30040096-75000C)
from
$14.49
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Exceptional wear protection of gears and bearings
- Provides superior deposit control and protects metal surfaces from rust and corrosion
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
Upgrade your 2024 Toyota 4Runner with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 2024 Toyota 4Runner, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Drivetrains are key to keeping your 4Runner functioning at its best. At Advance Auto Parts, we offer a wide selection of 12 Drivetrains for the 2024 Toyota 4Runner, designed to meet your needs without breaking the bank.
From
Drive Shafts and Axle
replacements to
Universal Joints
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2024 Toyota 4Runner at great prices.
Our Drivetrains inventory for this model
ranges from just $11.99 to $869.99, with
an average price of $283.19.
Our 12 Drivetrains in stock come from 6 trusted brands, so you’re sure to find the right part for your 2024 Toyota 4Runner without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2024 Toyota 4Runner, we stock popular OEM and aftermarket Drivetrains from top names
like Valvoline, and more.
Valvoline Drivetrains
start at just $14.49 and boast an impressive 4.8 stars average rating from customers.
With 6 customer reviews and counting, our 2024 Toyota 4Runner Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Fuel and Emissions Systems, Filters and PCVs
and more to make sure your 2024 Toyota 4Runner is always ready to roll. We’re committed to providing you with everything you need to keep your 4Runner in top shape, all in one place.
Start shopping confidently below for your 2024 Toyota 4Runner!
Best-Selling Drive Shafts and Axles for 2024 Toyota 4Runners
Enhance the driving experience in your Toyota with 4 quality Drive Shafts and Axle components, starting at $211.99.
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69170XD)
from
$211.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-5032)
from
$642.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100 percent dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-5021)
from
$573.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100 percent dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-5040)
from
$422.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100 percent dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Most Popular 2024 Toyota 4Runner Universal Joints
Customize your Toyota with 1 Universal Joints products
like U-Joints, all
priced under $62.99.
Spicer – Universal Joint, Greaseable Toyota Series ISR (Part No.5-1510X)
from
$62.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Product Features:
See More
Product Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
Top Picks for 2024 Toyota 4Runner Spindles
Upgrade Toyota 4Runners with top-quality Spindles parts, including 1 OEM and aftermarket selections for your 2024 model.
Dorman – Wheel Bearing Hub Nut (Part No.926-263)
from
$29.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
In-Demand Differentials for 2024 Toyota 4Runners
Select from 6 premium Differentials parts for your 2024 Toyota 4Runner, with prices ranging from $11.99 to $869.99.
Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)
from
$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands of many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON*, DEXRON*-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)
from
$18.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.
Product Features:
See More
Product Features:
- FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations.
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
- MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
Idemitsu – Type TLS-LV Automatic Transmission Fluid, 1 Quart (Part No.30040096-75000C)
from
$14.49
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Exceptional wear protection of gears and bearings
- Provides superior deposit control and protects metal surfaces from rust and corrosion
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Dorman – Pre-Pressed Axle (OE Fix) (Part No.926-137)
from
$869.99
Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.
Product Features:
See More
Product Features:
- Easier installation – this loaded axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box
- Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
- Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
Dorman – Pre-Pressed Axle (OE Fix) (Part No.926-138)
from
$868.99
Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.
Product Features:
See More
Product Features:
- Easier installation – this loaded axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box
- Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
- Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
Top-Rated Drivetrains Brands For Your 2024 Toyota 4Runner
Shop for the best-rated brands offering Drivetrains and other products for your 2024 Toyota 4Runners. Below you’ll find some of our best rated Drivetrains from Valvoline, and more. Drivetrains from these brands that fit a 2024 4Runner start at just $14.49 and are rated as high as 4.8 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular Valvoline 2024 Toyota 4Runner Drivetrains
When it comes to maintaining or upgrading your 2024 Toyota 4Runner, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 2024 Toyota 4Runner. With over 1 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49. Plus, with over 2 customer reviews and an average rating of 4.8 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$14.49
(2)
DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
“I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
I pu”
FAQs for 2024 Toyota 4Runner Drivetrains
Which Drivetrains are best-sellers for 2024 Toyota 4Runners?
Out of 12 Drivetrains that fit 2024 Toyota 4Runners, the following parts are the top sellers:
- DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (12079139) – $11.99
- Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (12507273) – $18.99
- Type TLS-LV Automatic Transmission Fluid, 1 Quart (11872576) – $14.49
What’s the price range for 2024 Toyota 4Runner Drivetrains?
Drivetrain prices for the 2024 Toyota 4Runner start at $11.99 and go up to $869.99 for the most premium parts.
What’s the average price of a Drivetrain for a 2024 Toyota 4Runner?
The average price for Drivetrains for the 2024 Toyota 4Runner is $283.19. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other Toyota 4Runner model years?
What are the cheapest Drivetrains for my 2024 Toyota 4Runner?
The cheapest 2024 Toyota 4Runner Drivetrains we carry in stock are:
- DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (12079139) – $11.99
- DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
- Type TLS-LV Automatic Transmission Fluid, 1 Quart (11872576) – $14.49
- Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (12507273) – $18.99
- Wheel Bearing Hub Nut (12150378) – $29.99
What are the top-rated Drivetrains that fit the 2024 Toyota 4Runner?
Out of 6 reviews by customers, our 2024 Toyota 4Runner Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2024 Toyota 4Runner and their top-rated products:
- Differentials
- DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
What types of Drivetrains do you sell for my 2024 Toyota 4Runner?
As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 2024 Toyota 4Runner:
Can I get help with 2024 Toyota 4Runner Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Drivetrains and more.
What is your return policy for Toyota 4Runner Drivetrains?
Advance Auto Parts keeps returns simple. For new Toyota 4Runner Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
