2016 Toyota 4Runner Drivetrains

Name: 4WD Transfer Case Motor
Brand: Dorman
SKU: 600-493
Price: 1189.99 USD

Below you will find various in-demand Toyota Drivetrains, components and accessories for your 2016 4Runner. Advance Auto Parts has popular 4Runner parts like Transfer Cases, 4WD Components, Differentials and more. You’ll also find aftermarket and OEM Drivetrains for other 4Runner model years including 2014, 2015, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2016 Toyota 4Runner Drivetrains below and start saving instantly.

Popular 2016 Toyota 4Runner Drivetrains Categories

Differential Oil

4WD Actuator Switches

U-Joints

Drive Shaft and Axles

Differential Lock Actuators

Transmission Transfer Case Motors

Drive and Prop Shaft Assemblies

Differential Bearings

Differential Axle Shafts

Axle Shaft Seals

Transfer Case Output Shaft Seals

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Rebuild Kits

Differential Pinion Seals

Axle Vents

4WD Actuator Valves

Differential Ring and Pinions

Spindle Lock Nuts

Drive Shaft Repair Kits

Differential Pinion Bearing Kits

Differential Ring Gear Bolts

Input Shaft Seals

Differential Crush Sleeves

Differential Pinion Shims

Transfer Case Actuators

Transfer Case Drive Gear Seals

Essential Drivetrains for 2016 Toyota 4Runners

from

$1189.99

Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.

Product Features:

Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications
Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion
100% new – this transfer case motor is entirely new, not remanufactured like competitors
Quality assured – vehicle-specific application has been validation tested to ensure quality

from

$8.29

Product Features:

Brand may vary by location

from

$122.99

Axle shaft damaged or bearings worn out: This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:

Product Features:

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$12.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$14.99

7.5″ IFS axle side seal.Yukon Mighty seal.

Product Features:

Front stub axle seal
Fits standard rotation Toyota 7.5″

from

$349.99

This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models
Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator
Smart solution – delivers reliable fit and function for competitive price
Trustworthy quality – backed by team of designers and engineers in the United States

from

$6.99

This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$13.99

Crush Sleeve for GM 55-62 car & truck and Toyota 8″. 2.510″ long.

Product Features:

Crush sleeve for 1955-1962 GM passenger car and Toyota 8″ with 4 cylinder engine
2.510″ tall

from

$63.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), pinion shim kit, marking compound and brush. No side shims.

Product Features:

Fits Toyota 7.5″ front with 6 cylinder engine
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$19.99

Pinion seal for 7.5″, 8″, V6, and T100 and Tacoma with lockers.Yukon Mighty seal.

Product Features:

Pinion seal
Fits Toyota 7.5″, 8″ with 4 cylinder engine, V6, Landcruiser and Tacoma/T100 with factory locking differential

from

$24.49

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$786.99

OE Manufactured Direct Replacement Shift and Lock Actuators Control the Vehicle 2WD to 4WD, 4WD High to Low, and/or Differential Lock Function.

Product Features:

Actuators control the vehicle 2WD to 4WD, 4WD High to Low, and/or differential lock function.

from

$211.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$41.99

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

Better wear protection
Increased fuel efficiency
Better protection of the expensive catalytic emission system
Improved compatibility with fuels containing ethanol
Superior corrosion protection
Meets ILSAC GF-5 and Dexos1 performance requirements

from

$425.99

CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100 percent dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:

Built to match O.E. form, fit and function.
100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$59.99

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$394.99

Ring&Pinion Gear Set

from

$622.99

OE Manufactured Direct Replacement Shift and Lock Actuators Control the Vehicle 2WD to 4WD, 4WD High to Low, and/or Differential Lock Function.

Product Features:

Actuators control the vehicle 2WD to 4WD, 4WD High to Low, and/or differential lock function.

from

$89.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$439.99

AxleDiffrlBrngKit

from

$38.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$299.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear. This kit fits applications with a 27 spline pinion.

Product Features:

Fits Toyota V6 rear
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

from

$1214.99

OE Manufactured Direct Replacement Shift and Lock Actuators Control the Vehicle 2WD to 4WD, 4WD High to Low, and/or Differential Lock Function.

Product Features:

Actuators control the vehicle 2WD to 4WD, 4WD High to Low, and/or differential lock function.

from

$13.49

Product Features:

KIT SHIM TOYO TRK 79-92 REAR/89-92 FRONT

from

$6.99

Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.

Product Features:

Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
11mm x 1.0

from

$24.99

Product Features:

Spindle nut kit for Toyota front

from

$35.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$76.99

Yukon U/Joint for many Toyota applications. 2.047″ snap ring span, 1.142″ cap diameter. Inside snap ring.

Upgrade your 2016 Toyota 4Runner with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2016 Toyota 4Runner, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Drivetrains are key to keeping your 4Runner functioning at its best. At Advance Auto Parts, we offer a wide selection of 61 Drivetrains for the 2016 Toyota 4Runner, designed to meet your needs without breaking the bank. From Transfer Case replacements to 4WD Components upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2016 Toyota 4Runner at great prices. Our Drivetrains inventory for this model ranges from just $6.99 to $1,189.99, with an average price of $273.50. Our 61 Drivetrains in stock come from 13 trusted brands, so you’re sure to find the right part for your 2016 Toyota 4Runner without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2016 Toyota 4Runner, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline, Moog, National, and more. Valvoline Drivetrains start at just $14.49 and boast an impressive 4.8 stars average rating from customers. Moog and National also bring quality to the table, with Drivetrains available starting at $11.99, and at an average 4.5 stars rating. With 280 customer reviews and counting, our 2016 Toyota 4Runner Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2016 Toyota 4Runner is always ready to roll. We’re committed to providing you with everything you need to keep your 4Runner in top shape, all in one place. Start shopping confidently below for your 2016 Toyota 4Runner!

Best-Selling Transfer Cases for 2016 Toyota 4Runners

Enhance the driving experience in your Toyota with 6 quality Transfer Case components, starting at $8.29.

show more show less

from

$8.29

Product Features:

Brand may vary by location

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$22.49

Design type: springless; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$1189.99

Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications
Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion
100% new – this transfer case motor is entirely new, not remanufactured like competitors
Quality assured – vehicle-specific application has been validation tested to ensure quality

from

$1086.99

OE Manufactured Direct Replacement Shift and Lock Actuators Control the Vehicle 2WD to 4WD, 4WD High to Low, and/or Differential Lock Function.

Product Features:

Actuators control the vehicle 2WD to 4WD, 4WD High to Low, and/or differential lock function.

from

$20.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

Top Picks for 2016 Toyota 4Runner Differentials

Upgrade Toyota 4Runners with top-quality Differentials parts, including 32 OEM and aftermarket selections for your 2016 model.

show more show less

from

$14.49

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$89.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$11.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands of many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON*, DEXRON*-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$18.99

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations.
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

from

$14.49

Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Exceptional wear protection of gears and bearings
Provides superior deposit control and protects metal surfaces from rust and corrosion
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$18.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$13.49

Product Features:

KIT SHIM TOYO TRK 79-92 REAR/89-92 FRONT

from

$137.99

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil

from

$59.99

V6 Toyota solid crush sleeve replacement spacer kit, preload.

Product Features:

Crush sleeve eliminator kit for Toyota V6

from

$869.99

Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.

Product Features:

Easier installation – this loaded axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box
Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$868.99

Easier installation – this loaded axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box
Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$649.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

Fits Toyota 8″ clamshell front
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and silicone.

from

$622.99

OE Manufactured Direct Replacement Shift and Lock Actuators Control the Vehicle 2WD to 4WD, 4WD High to Low, and/or Differential Lock Function.

Product Features:

Actuators control the vehicle 2WD to 4WD, 4WD High to Low, and/or differential lock function.

from

$614.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Toyota 8″ clamshell front
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.

from

$569.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses high quality bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits Toyota 8″ clamshell front
Reverse rotation only
Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.

from

$564.99

DiffrlPartsKit

from

$544.99

Ring and Pinion Kit

from

$544.99

Ring and Pinion Kit

from

$519.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

from

$519.99

from

$519.99

AxleDiffrlBrngKit

from

$468.99

RngPnnKt

In-Demand Drive Shafts and Axles for 2016 Toyota 4Runners

Select from 15 premium Drive Shafts and Axles parts for your 2016 Toyota 4Runner, with prices ranging from $6.99 to $803.99.

show more show less

from

$11.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$154.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$22.99

Product Features:

Design type: spring loaded; multi-lip
Temperature range: – 0 Deg. F to 400 Deg. F / – 0 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$6.99

This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$211.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$59.99

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$803.99

The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance.

Product Features:

Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$693.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$642.99

Built to match O.E. form, fit and function.
100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$573.99

Built to match O.E. form, fit and function.
100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$542.99

Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$533.99

The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX front drive shaft makes the U-joints serviceable for simpler maintenance.

Product Features:

Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$422.99

Built to match O.E. form, fit and function.
100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$401.99

Built to match O.E. form, fit and function.
100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$57.99

Toyota rear inner axle seal, 03+ 4Runner,’05+Tacoma, 07-13 FJ Cruiser,Yukon Mighty seal.

Product Features:

Inner axle seal
Fits 2003 and up Toyota T100 and Tacoma

Most Sold 2016 Toyota 4Runner Universal Joints

Explore our best-selling Toyota parts for the 2016 4Runner among 5 OEM and aftermarket options starting from $25.99.

show more show less

from

$35.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$25.99

Product Features:

COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$25.99

Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$31.49

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$62.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Product Features:

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

Top-Rated Drivetrains Brands For Your 2016 Toyota 4Runner

Shop for the best-rated brands offering Drivetrains and other products for your 2016 Toyota 4Runners. Below you’ll find some of our best rated Drivetrains from Valvoline, Moog, and National, and more. Drivetrains from these brands that fit a 2016 4Runner start at just $11.99 and are rated as high as 4.8 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2016 Toyota 4Runner Drivetrains

When it comes to maintaining or upgrading your 2016 Toyota 4Runner, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 2016 Toyota 4Runner. With over 1 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49. Plus, with over 2 customer reviews and an average rating of 4.8 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

“I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years, I pu”

Popular Moog 2016 Toyota 4Runner Drivetrains

Moog auto parts is one of the highest quality Drivetrain brands in the market. Any 2016 Toyota 4Runner owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2016 4Runner, Advance Auto Parts carries a full inventory of 2 Moog Drivetrains. Plus you will be keeping your Toyota in peak condition while saving money because prices on these Moog Drivetrains range from $25.99 to $35.99, plus, with more than 14 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $25.99

(10)

Greaseable Premium Universal Joint

“Great service and the part was perfect.”

from $35.99

(4)

Greaseable Super Strength Universal Joint

“My rear drive shaft had developed a clunk on my 93 4runner 4×4. Went underneath the truck gave the driveshaft some movement with a pry bar and sure en”

FAQs for 2016 Toyota 4Runner Drivetrains

Which Drivetrains are best-sellers for 2016 Toyota 4Runners?

Out of 61 Drivetrains that fit 2016 Toyota 4Runners, the following parts are the top sellers:

DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (12079139) – $11.99
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (12507273) – $18.99
Greaseable Premium Universal Joint (10086951) – $25.99

What’s the price range for 2016 Toyota 4Runner Drivetrains?

Drivetrain prices for the 2016 Toyota 4Runner start at $6.99 and go up to $1,189.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2016 Toyota 4Runner?

The average price for Drivetrains for the 2016 Toyota 4Runner is $273.50. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Toyota 4Runner model years?

Yes, we currently carry Drivetrains for 39 model years of Toyota 4Runners between 1984 and 2024. Drivetrains are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2015, and 2014.

What are the cheapest Drivetrains for my 2016 Toyota 4Runner?

The cheapest 2016 Toyota 4Runner Drivetrains we carry in stock are:

Differential Vent Breather (11661666) – $6.99
DiffRingGearBolt (12017975) – $7.99
Oil Seal (10659689) – $8.29
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (12079139) – $11.99
Multi-Purpose Seal (10051735) – $11.99

What are the top-rated Drivetrains that fit the 2016 Toyota 4Runner?

Out of 280 reviews by customers, our 2016 Toyota 4Runner Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2016 Toyota 4Runner and their top-rated products:

Universal Joints
- Greaseable Super Strength Universal Joint (10087062) – $35.99
- Greaseable Premium Universal Joint (10086951) – $25.99
- Universal Joint (10265510) – $25.99

What types of Drivetrains do you sell for my 2016 Toyota 4Runner?

As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 2016 Toyota 4Runner:

Can I get help with 2016 Toyota 4Runner Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Drivetrains and more.

What is your return policy for Toyota 4Runner Drivetrains?

Advance Auto Parts keeps returns simple. For new Toyota 4Runner Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2016 Toyota 4Runner Drivetrains

Dorman – 4WD Transfer Case Motor (Part No.600-493)

Driveworks – Oil Seal (Part No.S-225875)

Dorman – Rear Axle Shaft, Left Or Right (Part No.630-500A)

National – Multi-Purpose Seal (Part No.710141)

Yukon Gear – 7.5" IFS Axle Side Seal (Part No.30327)

Dorman – Differential Actuator (Part No.600-410)

Dorman – Differential Vent Breather (Part No.924-284)

Yukon Gear – Crush Sleeve (Part No.33101)

Yukon Gear – Minor Install Kit For Toyota 7.5" IFS Differential, V6 (Part No.12071)

Yukon Gear – Pinion Seal For Toyota 7.5", 8", V6 & T100 (Part No.30005)

National – Tapered Roller Bearing Cone (Part No.JLM104948)

AISIN – Differential Lock Shift Actuator Assembly (Part No.SAT-021)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69170XD)

Royal Purple – High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart (Part No.51530)

Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-5003)

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

USA Standard Gear – Ring&Pinion Gear Set (Part No.36436)

AISIN – Differential Lock Shift Actuator Assembly (Part No.SAT-020)

National – Multi-Purpose Bearing (Part No.30025)

Yukon Gear – AxleDiffrlBrngKit (Part No.11128)

National – Shaft Repair Sleeve (Part No.99189)

Yukon Gear – Pinion Install Kit For Toyota V6 Rear Differential (Part No.13092)

AISIN – Transfer Case Shift Actuator Assembly (Part No.SAT-019)

Motive Gear – Differential Pinion Shim Kit (Part No.1109)

Yukon Gear – Ring Gear Bolt (Part No.33060)

Yukon Gear – Spindle Nut Kit For Toyota Front (Part No.33513)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.285)

Yukon Gear – U/Joint For Many Toyota Applications (Part No.42007)

Driveworks – Oil Seal (Part No.S-225875)

National – Multi-Purpose Seal (Part No.710141)

National – Multi-Purpose Seal (Part No.710114)

Dorman – 4WD Transfer Case Motor (Part No.600-493)

AISIN – Transfer Case Shift Actuator Assembly (Part No.SAT-003)

National – Multi-Purpose Seal (Part No.710159)

Dorman – 4WD Axle Actuator Assembly (Part No.600-488)

AISIN – Differential Lock Shift Actuator Assembly (Part No.SAT-017)

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

National – Multi-Purpose Bearing (Part No.30025)

Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Idemitsu – Type TLS-LV Automatic Transmission Fluid, 1 Quart (Part No.30040096-75000C)

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

National – Multi-Purpose Seal (Part No.710697)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Motive Gear – Differential Pinion Shim Kit (Part No.1109)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Yukon Gear – Crush Sleeve Eliminator Kit For Toyota V6 (Part No.55053)

Dorman – Pre-Pressed Axle (OE Fix) (Part No.926-137)

Dorman – Pre-Pressed Axle (OE Fix) (Part No.926-138)

Yukon Gear – Master Overhaul Kit For New Toyota Clamshell Design Front Reverse Rotation Differential (Part No.14130)

AISIN – Differential Lock Shift Actuator Assembly (Part No.SAT-020)

USA Standard Gear – Master Overhaul Kit for New Toyota Clamshell Design Front Reverse Rotation Differential (Part No.37115)

Yukon Gear – Bearing Install Kit For New Toyota Clamshell Design Front Reverse Rotation Differential (Part No.11108)

Yukon Gear – DiffrlPartsKit (Part No.14225)

Yukon Gear – Ring and Pinion Kit (Part No.24680)

Yukon Gear – Ring and Pinion Kit (Part No.24681)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota 8.2" 12 Bolt Rear In 4.88 Ratio (Part No.24637)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota 8.2" 12 Bolt Rear In 4.56 Ratio (Part No.24636)

Yukon Gear – AxleDiffrlBrngKit (Part No.11129)

Yukon Gear – RngPnnKt (Part No.24677)

National – Multi-Purpose Seal (Part No.710596)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69170)

National – Multi Purpose Seal (Part No.710595)

Dorman – Differential Vent Breather (Part No.924-284)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69170XD)

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Dorman – 1-Piece Steel Driveshaft Assembly (OE Fix) (Part No.936-743)

Dorman – Drive Shaft: Greaseable, Adjustable (Part No.938-306)

Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-5032)

Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-5021)

Dorman – 1-Piece Steel Driveshaft Assembly (OE Fix) (Part No.936-772)

Dorman – 1-Piece Steel Driveshaft Assembly (OE Fix) (Part No.938-704)

Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-5040)

Cardone – Drive Shaft: Greaseable, Direct Replacement (Part No.65-5041)

Yukon Gear – Rear Inner Axle Seal ’03+ 4Runner,’05+Tacoma, 07-13 FJ Cruiser (Part No.30335)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.285)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.387)

Driveworks – Universal Joint (Part No.DW-387)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.287)