Toyota Land Cruiser Differentials

Product Features:

• Pinion gear thrust washer
• Fits Toyota Landcrusier

Product Features:

• Outer slinger
• Fits Toyota Landcruiser reverse rotation front

8″ Reverse high-pinion Toyota Drop Out (fits 8″ Housing) .

Product Features:

• Fits Toyota Landcruiser reverse rotation front

Product Features:

• KIT SHIM SIDE 9.5″ GM

Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landrcuiser (fine spline pinion) & T100/Tacoma with factory locker. 30mm socket, M20 x 1.5 thread.

Product Features:

• Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landcruiser with 30 spline pinion and Tacoma/T100 with factory locker
• 20mm x 1.5 thread
• 30mm socket

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

• Fits Toyota Landcruiser reverse rotation front
• Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.

The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts.

Product Features:

• Fits Toyota 9.5″ Landcruiser with 30 spline axles
• Patented internal design reduces common locker failures
• 8620 internals for added strength
• Assembled in the USA

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

• Fits 1990 and down Toyota Landcruiser
• Uses Koyo bearings and races
• Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.

Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).

Product Features:

• Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
• 5 needed

8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:

• Pinion depth shim kit for Toyota 7.5″, 8″ and V6

Product Features:

• CRUSH SLEEVE 12 BLT CAR

Yukon small hole yoke for ’82 and older Toyota 8″ and Landcruiser with 27 spline. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

• Fits 1982 and down Toyota Landcruiser
• 27 spline

Bearing race driver front Toyota 7.5″, 8″, Landcruiser, and the Suzuki Samurai. No return. (TOY30306).

Product Features:

• Bearing race driver
• Fits 30306 race
• All steel construction

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool

AxleShaft

Product Features:

• MINI-INSTALL TOYOTA 8″

Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.

Product Features:

• Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

OE Manufactured Direct Replacement Shift and Lock Actuators Control the Vehicle 2WD to 4WD, 4WD High to Low, and/or Differential Lock Function.

Product Features:

• Actuators control the vehicle 2WD to 4WD, 4WD High to Low, and/or differential lock function.

Landcruiser standard Open side gear Thrust washer.

Product Features:

• Side gear thrust washer
• Fits Toyota Landcrusier

Toyota Landcruiser ring gear nut for ring gear bolt.

Product Features:

• Ring gear nut
• Fits Toyota Landcruiser

The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:

• Includes three quarts of conventional oil

Ring and Pinion Kit

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:

• Fits Toyota 9.5″ Landcruiser with 30 spline axles
• Made from 9310 steel for added strength
• Replaces the spiders in a standard carrier case