1991 Toyota Land Cruiser Differentials

Essential 1991 Toyota Land Cruiser Differentials

NOK – Pinion Seal (Part No.J7010163834NOK)

Pinion Seal

from

$13.72
Pinion Seal

Yukon Gear – Oil Baffle (Part No.33007)

Oil Baffle

from

$7.99
Oil baffle for Toyota Landcruiser reverse rotation front, 8″ IFS front & TV6/Tacoma rear with factory locker.

Product Features:
  • Oil baffle
  • Fits Toyota Landcruiser reverse rotation front
See More

Yukon Gear – Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (Part No.33061)

Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate

from

$6.99
Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).

Product Features:
  • Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
  • 5 needed
See More

Yukon Gear – Toyota Landcruiser Reverse Rotation Front Outer Oil Slinger (Part No.33028)

Toyota Landcruiser Reverse Rotation Front Outer Oil Slinger

from

$46.99
Product Features:
  • Outer slinger
  • Fits Toyota Landcruiser reverse rotation front
See More

Yukon Gear – Landcruiser Standard Open Side Gear Thrust Washer (Part No.33400)

Landcruiser Standard Open Side Gear Thrust Washer

from

$28.99
Landcruiser standard Open side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits Toyota Landcrusier
See More

Yukon Gear – Grizzly Locker For Toyota Landcruiser, 30 Spline (Part No.28032)

Grizzly Locker For Toyota Landcruiser, 30 Spline

from

$1099.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts.

Product Features:
  • Fits Toyota 9.5″ Landcruiser with 30 spline axles
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Yukon Gear – Pinion Install Kit For Toyota Landcruiser Differential (Part No.13091)

Pinion Install Kit For Toyota Landcruiser Differential

from

$274.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits standard rotation Toyota Landcruiser
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Landcruiser Standard Open Pinion Gear Thrust Washer (Part No.33394)

Landcruiser Standard Open Pinion Gear Thrust Washer

from

$31.99
Product Features:
  • Pinion gear thrust washer
  • Fits Toyota Landcrusier
See More

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

from

$39.99
8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:
  • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
See More

Yukon Gear – 8" Reverse High-Pinion Toyota Drop Out (Part No.32298)

8" Reverse High-Pinion Toyota Drop Out

from

$529.99
8″ Reverse high-pinion Toyota Drop Out (fits 8″ Housing) .

Product Features:
  • Fits Toyota Landcruiser reverse rotation front
See More

Idemitsu – Type TLS-LV Automatic Transmission Fluid – 1 qt (Part No.30040096-75000C)

Type TLS-LV Automatic Transmission Fluid - 1 qt

from

$14.49
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Exceptional wear protection of gears and bearings
  • Provides superior deposit control and protects metal surfaces from rust and corrosion
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

USA Standard Gear – Ring & Pinion Gear Set For Toyota Landcruiser In A 5.29 Ratio (Part No.36259)

Ring & Pinion Gear Set For Toyota Landcruiser In A 5.29 Ratio

from

$447.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits Toyota 9.5″ Landcruiser
  • 9.50″ ring gear diameter
  • 27 spline pinion
  • 10 ring gear bolts
  • 5.29 ratio
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Toyota Landcruiser Pinion Nut, Coarse Spline (Part No.33158)

Toyota Landcruiser Pinion Nut, Coarse Spline

from

$15.99
Toyota Landcruiser pinion nut, coarse spline, LARGE. 22mm x 1.5mm.

Product Features:
  • Pinion nut
  • Fits Toyota Landcruiser with 10 spline pinion
See More

Yukon Gear – Landcruiser Standard Open Cross Pin Shaft (Part No.33419)

Landcruiser Standard Open Cross Pin Shaft

from

$32.99
Product Features:
  • Cross pin shaft
  • Fits Toyota Landcruiser
See More

Yukon Gear – Zip Locker For Toyota V6 (Part No.34034)

Zip Locker For Toyota V6

from

$1356.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.

Product Features:
  • Fits Toyota V6 rear
  • Forged case and 8620 internals for added strength
  • Works with a variety of air delivery systems
  • Assembled in the USA
See More

Motive Gear – Differential Crush Sleeve (Part No.3954480)

Differential Crush Sleeve

from

$5.49


Product Features:
  • CRUSH SLEEVE 12 BLT CAR
See More

Yukon Gear – V6 & L/C Reverse Drop Out Side Adjusters (Part No.33365)

V6 & L/C Reverse Drop Out Side Adjusters

from

$38.99
Product Features:
  • Side adjuster
  • Fits Toyota V6 and Landcruiser reverse rotation front
See More

USA Standard Gear – Spartan Locker For Toyota 95" Landcruiser With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17033)

Spartan Locker For Toyota 95" Landcruiser With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

from

$603.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits Toyota 9.5″ Landcruiser with 30 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

USA Standard Gear – Master Overhaul Kit For ’91 And Newer Toyota Landcruiser (Part No.37113)

Master Overhaul Kit For '91 And Newer Toyota Landcruiser

from

$399.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 1991 and up Toyota Landcruiser
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.
See More

USA Standard Gear – Master Overhaul Kit For ’90 & Old Toyota Landcruiser (Part No.37082)

Master Overhaul Kit For '90 & Old Toyota Landcruiser

from

$358.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 1990 and down Toyota Landcruiser
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.
See More

Yukon Gear – Bearing Install Kit For ’91-’97 Toyota Landcruiser Front Differential (Part No.11107)

Bearing Install Kit For '91-'97 Toyota Landcruiser Front Differential

from

$419.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits Toyota Landcruiser reverse rotation front
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
See More

Yukon Gear – Master Overhaul Kit For ’90 And Older Toyota Landcruiser Differential (Part No.14121)

Master Overhaul Kit For '90 And Older Toyota Landcruiser Differential

from

$359.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits 1990 and down Toyota Landcruiser
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and silicone.
See More

National – Bearings (Part No.30025)

Bearings

from

$89.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Koyo – Differential Bearing (Part No.J7060163891KOY)

Differential Bearing

from

$136.38
Differential Bearing

National – Bearings (Part No.208)

Bearings

from

$39.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.2788)

Bearings

from

$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.26820)

Bearings

from

$25.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

1991 Toyota Land Cruiser Differentials

Maybe you’re in the middle of a full rebuild of that 1991 Toyota Land Cruiser. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 60 different Differentials in our inventory ranging from $5.99 to $1,356.99. That means you can find the exact parts or products you need to keep that 1991 Toyota Land Cruiser running smoothly.

Differentials are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1991 Toyota Land Cruiser. Yukon Gear, National, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1991 Toyota Land Cruiser, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Differentials to keep your 1991 Toyota Land Cruiser rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1991 Toyota Land Cruiser Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1991 Toyota Land Cruiser demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Land Cruiser the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular National Differentials

We carry National parts in our stock across Differential Bearings categories, plus more. For a 1991 Toyota Land Cruiser, our most popular National Differentials include:
Bearings
from $32.99
(1)
Bearings
Differential Bearings

FAQs for 1991 Toyota Land Cruiser Differentials

What are the most purchased Differentials for the 1991 Toyota Land Cruiser?

Out of 60 Differentials for the 1991 Toyota Land Cruiser, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts
from $148.99
This product is not rated
Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts
Differential Oil
Redline Synthetic "Shock Proof" Oil - 3 Quarts
from $99.99
This product is not rated
Redline Synthetic "Shock Proof" Oil – 3 Quarts
Differential Oil