Jeep Compass Wheels and Tires

Essential Jeep Compass Wheels and Tires

Carquest Premium – Multi-Use Connector (Part No.PTC1572)

Multi-Use Connector

from

$73.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
See More

Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)

Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves.

from

$11.49
The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:
  • Includes 4 Rubber Press-in Valve Stems
  • Compatible with Autel 1-Sensors
  • Compatible with Autel 315MHz & 433MHz MX-Sensors
  • Warranty on Material and Workmanship
  • High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
See More

Dill Air Control – Snap-In TPMS Service Kit: Rubber, Includes Stepped Screw, 1 Piece (Part No.VS-20)

Snap-In TPMS Service Kit: Rubber, Includes Stepped Screw, 1 Piece

from

$3.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits and tools.

Product Features:
  • TPMS Snap-in stem for GM, Ford
  • Includes stepped screw.
  • 0.453″ rim hole compatibility
  • 80 PSI maximum cold inflation pressure
See More

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-510090)

Wheel Bearing: Direct Fit, 1 Piece

from

$45.49
Driveworks wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, Driveworks bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:
  • Depending on the application, specified Driveworks wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
  • Engineered, manufactured, and tested to meet or exceed OE specifications
  • Integrated seal design improves contamination resistance for a longer bearing life
  • High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
  • Manufactured from high quality steel to maximize durability under even the harshest driving conditions
  • Brand may vary by location
See More

Dorman – Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key (Part No.711-355)

Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key

from

$41.99
Protect your wheels with this precision-engineered wheel lock set, designed to replace standard factory nuts with secure, corrosion-resistant locking nuts. Crafted from high-quality materials and rigorously tested for durability and corrosion resistance, this set ensures long-lasting performance and peace of mind. With various sizes, quantities, and styles available, you can find the perfect fit and appearance for your vehicle. Whether you’re upgrading or replacing, this standard replacement set offers a reliable anti-theft solution backed by a team of U.S.-based experts with over a century of automotive experience.

Product Features:
  • Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
  • Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
  • Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
  • Engineered for precision – designed to seamlessly replace factory nuts, this wheel lock set ensures a secure fit while maintaining the integrity and appearance of your vehicle’s wheels.
See More

FAG US – Shaft Seal (Part No.SS2019)

Shaft Seal

from

$9.99
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:
  • High-precision and High-quality components used in all KITs
  • Coverage of classic and new high-tech solutions for the best system coverage
See More

Dorman – Wheel Stud: Serrated, M12-1.50 Thread Size, Right Hand Thread (sold by each) (Part No.610-414)

Wheel Stud: Serrated, M12-1.50 Thread Size, Right Hand Thread (sold by each)

from

$2.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:
  • Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
  • Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
  • Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Dorman – Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Tuner, 1.298" Length, Chrome, 20 Locks/1 Key (Part No.711-345)

Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Tuner, 1.298" Length, Chrome, 20 Locks/1 Key

from

$41.99
Secure your wheels with this precision-engineered wheel lock set, designed to replace factory wheel nuts with attractive, corrosion-resistant locking nuts that deter theft. Crafted from high-quality materials and rigorously tested for durability and corrosion resistance, this set ensures reliable performance and a long service life. With various sizes, quantities, and appearances available, you can find the perfect fit for your vehicle by checking the product attributes. As a standard replacement, this set combines functionality and style, offering a trustworthy solution backed by a team of U.S.-based product experts with over a century of automotive experience. Protect your investment with this durable and dependable anti-theft upgrade.

Product Features:
  • Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
  • Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
  • Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
  • Designed for precision fitment, this wheel lock set ensures seamless compatibility with your vehicle, providing a secure and stylish anti-theft solution tailored to your specific needs.
See More

COAST TO COAST – 16 Inch, 5 Spokes, Snap-On, Painted, Gloss Black, Abs Plastic, Set Of 4 (Part No.IWCIMP97BLK)

16 Inch, 5 Spokes, Snap-On, Painted, Gloss Black, Abs Plastic, Set Of 4

from

$134.99
Quickly and easily change the trim level appearance of your car, pickup truck or SUV with Impostor(R) wheel skins from Coast to Coast International. Each Impostor(R) wheel skin is designed and manufactured from automotive grade ABS to fit securely over the OE wheel. Installation in simple and secure. Pair them with CCI Grille Overlays and Door Handle or Mirror Covers for a complete package look. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
  • Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
  • FIT SECURELY OVER THE ORIGINAL WHEEL, Fits Like A Glove Over Existing Wheels And Stay Securely Attached Using A Patented Retention System So You Can Be Confident That They Wont Fall Off While Driving
  • UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
  • COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
  • EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
See More

Schrader – TPMS Sensor Service Kit (Part No.20018)

TPMS Sensor Service Kit

from

$3.79
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:
  • DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
  • DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
  • SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
  • VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
  • PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

COAST TO COAST – 17", 5 Spoke, Chrome Plated, Plastic, Set Of 4, Not Compatible With Steel Wheels (Part No.IWCIMP373X)

17", 5 Spoke, Chrome Plated, Plastic, Set Of 4, Not Compatible With Steel Wheels

from

$109.99
Quickly and easily change the trim level appearance of your car, pickup truck or SUV with Impostor(R) wheel skins from Coast to Coast International. Each Impostor(R) wheel skin is designed and manufactured from automotive grade ABS to fit securely over the OE wheel. Installation in simple and secure. Pair them with CCI Grille Overlays and Door Handle or Mirror Covers for a complete package look. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
  • Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
  • FIT SECURELY OVER THE ORIGINAL WHEEL, Fits Like A Glove Over Existing Wheels And Stay Securely Attached Using A Patented Retention System So You Can Be Confident That They Wont Fall Off While Driving
  • UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
  • COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
  • EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
See More

COAST TO COAST – Oem, 2-1/2"Dia, 0.75"H, Closed Style, Gloss Black, Abs, Snap On, Set Of 4 (Part No.IWCC9107BLK)

Oem, 2-1/2"Dia, 0.75"H, Closed Style, Gloss Black, Abs, Snap On, Set Of 4

from

$41.99
Coast to Coast International aftermarket center caps are a quick and cost effective alternative to replacing OEM center caps that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • Designed And Manufactured To Fit Directly Into The OEM Wheel
  • Manufactured With Automotive Grade Abs And Durable
  • Replaces OEM Center Caps And Affordable Alternative
  • A Cost Effective Alternative To Replace OEM Center Caps That Have Been Lost, Stolen Or Worn Over Time
See More

Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Open End, 0.831" Length, Chrome, 1 Pack (Part No.611-183.1)

Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Open End, 0.831" Length, Chrome, 1 Pack

from

$2.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

COAST TO COAST – 17", 5 Spoke, Gloss Black, Plastic, Set Of 4, Not Compatible With Steel Wheels (Part No.IWCIMP373BLK)

17", 5 Spoke, Gloss Black, Plastic, Set Of 4, Not Compatible With Steel Wheels

from

$109.99
Quickly and easily change the trim level appearance of your car, pickup truck or SUV with Impostor(R) wheel skins from Coast to Coast International. Each Impostor(R) wheel skin is designed and manufactured from automotive grade ABS to fit securely over the OE wheel. Installation in simple and secure. Pair them with CCI Grille Overlays and Door Handle or Mirror Covers for a complete package look. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
  • Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
  • FIT SECURELY OVER THE ORIGINAL WHEEL, Fits Like A Glove Over Existing Wheels And Stay Securely Attached Using A Patented Retention System So You Can Be Confident That They Wont Fall Off While Driving
  • UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
  • COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
  • EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
See More

Dorman – Wheel Bearing and Hub Assembly: 5 Studs (Part No.951-089)

Wheel Bearing and Hub Assembly: 5 Studs

from

$147.99
This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.

Product Features:
  • Complete repair – this assembly includes the wheel hub and application-specific bearing components
  • Saves time – eliminates work required to remove individual corroded components
  • Reliable fit – precision-engineered to match the dimensions of original equipment
  • Trustworthy quality – engineered and tested in the United States
See More

Huf North America – 315/433MHz Universal Sensor (Part No.UVS7050)

315/433MHz Universal Sensor

from

$40.99
Professional installation is strongly suggested

Product Features:
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Autel – Adjustable Angle Programmable Universal TPMS Sensor – Metal, Dual Frequency (Part No.300030)

Adjustable Angle Programmable Universal TPMS Sensor - Metal, Dual Frequency

from

$29.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:
  • Maximum Signal Strength, Battery Reliability.
  • 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
  • Combined Frequency – 315MHz and 433MHz
  • Programmable with Autel TPMS Service Tools
  • Program to Replace 99 Percent of OE Sensors
  • Meets SAE Standards J1205 and J1206
  • Maximum Signal Strength, Battery Reliability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Autel – MX-Sensor Component Kit (Part No.MXSENSORCK)

MX-Sensor Component Kit

from

$68.99
Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:
  • MX-Sensor Components
  • 4 Metal Valves
  • 4 Rubber Valves
  • Rubber Gasket (2×10 pcs)
  • Screw Nut (2×10 pcs)
  • Washer (2×10 pcs)
  • Metal Valve Cap (2X10 pcs)
  • Rubber Valve Cap (2X10 pcs)
  • Valve Core (2X10 pcs)
See More

Dorman – Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" L, Neon-Chrome, 20 Locks/1 Key (Part No.711-355G)

Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" L, Neon-Chrome, 20 Locks/1 Key

from

$59.99
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:
  • Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
  • Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
  • Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Blue Chrome Acorn M12-1.50, Hex 3/4 Inch Length 1-3/8 Inch (Part No.711-342)

Blue Chrome Acorn M12-1.50, Hex 3/4 Inch Length 1-3/8 Inch

from

$24.99
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:
  • Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
  • Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
  • Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Schrader – TPMS Sensor Service Kit (Part No.20008)

TPMS Sensor Service Kit

from

$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:
  • DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
  • DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
  • SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
  • VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
  • PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
See More

Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Valve Stem Assembly, 1 each (Part No.9066K)

Clamp-In TPMS Service Kit: Metal, 0.453 Inch Valve Stem Assembly, 1 each

from

$9.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:
  • For 315MHz Clamp-in OE TPMS sensor
See More

Dorman – Wheel Bolt: M12-1.25 Thrd, Con – 60 Deg. Seat Style, 19 mm Hex Size, Chrome (OE Fix) (Sold by each) (Part No.611-005)

Wheel Bolt: M12-1.25 Thrd, Con - 60 Deg. Seat Style, 19 mm Hex Size, Chrome  (OE Fix) (Sold by each)

from

$10.99
The original lug bolt on certain vehicles has a failure-prone two-piece design that makes rust common and repair difficult. This Dorman OE FIX replacement has a one-piece, carbon steel design to prevent future problems.

Product Features:
  • Improved design – this replacement lug bolt changes the original two-piece design to one piece for greater reliability
  • Thoroughly tested – part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
  • Corrosion resistant – chrome design and removal of cap prevents future rust
  • Item is priced and sold by each. See store for details.
See More

Dorman – Precision Wheel Bolt M12-1.25 – 19mm Hex Head, 23mm Thread Length (OE Fix) (Part No.611-005CD)

Precision Wheel Bolt M12-1.25 - 19mm Hex Head, 23mm Thread Length (OE Fix)

from

$26.99
The original lug bolt on certain vehicles has a failure-prone two-piece design that makes rust common and repair difficult. This Dorman OE FIX replacement has a one-piece, carbon steel design to prevent future problems.

Product Features:
  • Improved design – this replacement lug bolt changes the original two-piece design to one piece for greater reliability
  • Thoroughly tested – part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
  • Corrosion resistant – chrome design and removal of cap prevents future rust
See More

Helping You Find the Right Wheels and Tires for Your Jeep Compass

You love your Compass. So we’ve made it easier than ever to help you find Jeep Compass Wheels and Tires in our online catalog. Our inventory holds 156 aftermarket and OEM Wheels and Tires for your Jeep Compass, ranging from $1.99 to $7,322.99.

We offer parts from 17 brands trusted to make quality Wheels and Tires for your Jeep Compass. Before you buy, take some time to read through customer reviews. We currently have 28,425 reviews of Jeep Compass Wheels and Tires from previous customers. Some of the top rated parts include Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece with 3.3 stars and VDO Metal Clamp-in Stem REDI-Sensor with 4.5 stars.

Find your Compass Wheels and Tires here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Jeep Compass part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Wheels and Tires Brands for Your Jeep Compass

Our inventory holds Wheels and Tires for your Jeep Compass from 17 trusted brands. You’ll find OEM and aftermarket parts from brands like Dorman, Autel, and Schrader, all of which can keep that Jeep happy.

Top-Rated Dorman Wheels and Tires

Leading Dorman Wheels and Tires

We carry Dorman brand parts for your Jeep Compass across several catalog categories, including Wheel Hardware. Some of our most reviewed Dorman parts include:

FAQs for Jeep Compass Wheels and Tires

What are the most purchased Wheels and Tires for the Jeep Compass?

Out of 156 Wheels and Tires for the Jeep Compass, the most popular in our inventory are:

What are the top-rated Jeep Compass Wheels and Tires?

Top-rated Wheels and Tires for your Jeep Compass based on customer reviews/ratings are:
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
from $43.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
“Was everything I expected”
VDO Metal Clamp-in Stem REDI-Sensor
from $49.99
(54)
VDO Metal Clamp-in Stem REDI-Sensor
“It works perfectly ! Will buy again for my Acura MDX Thanks to advanceautoparts.”
VDO Rubber Snap-in Stem REDI-Sensor
from $53.99
(26)
VDO Rubber Snap-in Stem REDI-Sensor
“The replacement battery is nice. I am purchasing one pre pay, until I have the other three. They aren’t cheap, but worth double the price. The tire gu”