Lexus RX350 Parts

Name: Liftgate Lift Support: 20.5" Ext Length, 6.8" Travel, 152 Lbs of Force, 1 Pk
Brand: StrongArm
SKU: D6135
Price: 58.99 USD

Lexus RX350 Body Parts

from

$58.99

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal
Non-Stick Back-Up Ring
Hardened Nitride Plated Steel Shaft
Engineered In USA To OE Quality Standards For Performance And Durability
IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
Easy To Install In Just Minutes. No Special Tools Required.
Exact Fit Original Equipment Design Guarantees Correct Fit And Function
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$15.99

New Standard Replacement Driver Side Hood Hinge, Canada Built Models

Product Features:

Canada Built Models, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$71.99

GRILLE MOLDING

from

$69.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$61.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$260.50

Tailgate Latch

from

$33.99

New Standard Replacement Passenger Side Rear Bumper Cover Stiffener Bracket

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$35.99

New Standard Replacement Front Bumper Center Insert, Matte Finish

Product Features:

Matte Finish, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$39.49

This door hinge is designed to match the function of an original equipment hinge on specified vehicles. It is engineered to securely connect a door and door frame to help restore proper door operation and replace a rusted, failed, or damaged hinge.

Product Features:

Direct replacement – this door hinge is designed to match the fit, function and performance of an original equipment hinge on specified vehicles.
Ideal solution – engineered to securely connect a door and door frame to help restore proper door operation, and seamlessly replace a rusted, failed, or damaged hinge.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$701.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$4.79

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$502.99

New Standard Replacement Front Bumper Lower Valance, With F-Sport, Textured Black

Product Features:

With F-Sport, Textured Black, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$40.99

Product Features:

Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.

from

$72.99

New CAPA Certified Premium Replacement Rear Bumper Impact Absorber

Product Features:

Made Of Expanded Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$0.49

All our Multi-Purpose Retainers are made of high quality materials for long-lasting durability. Offering a full line of Multi-Purpose Retainers for a wide range of applications.

Product Features:

Durable nylon design for a long service life
Also suitable for a broad variety of industrial and commercial uses
Conveniently packaged in a variety of piece counts
Direct replacement Retainers available (where applicable) to ensure a proper fit

from

$85.99

PENTOSIN ATF 44 5L

from

$74.99

New CAPA Certified Standard Replacement Driver Side Fender Liner

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$199.99

Spare tire hoist rusted out and corroded? This replacement hoist is specifically engineered to match the original design on specific vehicles, and it’s specially coated to resist future rust and corrosion.

Product Features:

Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models.
Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement.
Functionality ensured – hoist appearance may vary slightly from original part but functions the same
Corrosion resistant – specially coated to prevent future rust and corrosion

from

$72.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$186.89

INTERIOR DOOR HANDLE

from

$16.29

This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles.
Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$39.99

New Standard Replacement Front Bumper Grille Insert

Product Features:

Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$356.96

Door Lock Assembly

from

$5.99

New Standard Replacement Driver Side Outer Front Bumper Cover Bracket

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Lexus RX350 Transmission Parts

from

$19.49

Automatic Transmission Seal

from

$99.99

from

$63.99

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement.
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$115.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to LEXUS 07-18; TOYOTA 07-20;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2007-2020
Weight approx: 4 Lbs
HYDRAULIC

from

$6.99

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug & help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$91.23

AT Filter Kit

from

$114.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to LEXUS 10-15;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2010-2015
Weight approx: 3 Lbs

from

$6.99

Product Features:

Brand may vary by location

from

$189.99

Shift Solenoid

from

$3189.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$12.41

AT Output Shaft Seal

from

$116.99

This automatic transmission speed sensor matches the fit and function of the original equipment sensor to restore critical speed-dependent vehicle functions. This part has been engineered and rigorously tested to ensure reliable performance.

Product Features:

Direct replacement – this automatic transmission speed sensor matches the fit and function of the original equipment sensor.
Durable construction – this sensor is engineered to precise standards to ensure accurate signal output.
Easy installation – this sensor is installed using the original hardware and plugs into the vehicle’s existing wiring
Quality tested – this part has undergone try-on validation and rigorous quality testing to ensure a quality fit and long service life

from

$266.99

from

$815.21

Dorman’s Auto Trans Oil Cooler is quality-engineered to cool automatic transmission fluid, prolonging its life. The Auto Trans Oil Cooler consequently helps prevent transmission fluid leaks and overheating, protecting the transmission from possible costly damage. Recommended for replacement when replacing the transmission.

Product Features:

Coated for high corrosion resistance and increased protection against the elements
Durable aluminum construction for long-lasting performance
Direct replacement for a proper fit every time
Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards (Video)

from

$8.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$1.45

AT Filter O-Ring

from

$28.99

Product Features:

Brand may vary by location

from

$34.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$9.79

Auto Trans Seal

from

$160.97

Dorman’s quality-engineered Auto Transmission Speed Sensor restores peak transmission function. Plus, your speedometer, cruise control, power steering and other systems that rely on the TSS return to maximum performance levels.

Product Features:

Durable construction ensures accurate readings
Direct replacement for a proper fit every time
Plugs into mating component smoothly and easily
This part has undergone a rigorous inspection to ensure high quality

from

$46.28

Differential Bearing

from

$33.99

from

$16.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

Lexus RX350 Automotive Accessories

from

$81.99

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

Custom fit to the windshield for complete coverage
Protect the dash and other interior components from damage by the sun
Reduce the interior temperature of the vehicle on hot days
The foam core center of the shield acts as an insulator
Easy to use and store away when not in use

from

$81.99

Custom fit to the windshield for complete coverage
Protect the dash and other interior components from damage by the sun
Reduce the interior temperature of the vehicle on hot days
The foam core center of the shield acts as an insulator
Easy to use and store away when not in use

from

$5.49

Cracked or wore out your key fob case? Want to add a custom look? Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.

Product Features:

Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look.
Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
Reliable construction – keeps moisture and debris out of internal electronics for long service life
Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

from

$129.99

Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$129.99

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$7.99

This floor mat retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this floor mat retainer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$70.99

Engine Heater; Replacement Cord

from

$63.99

Freeze Plug Heater Cartridge made of cast aluminum. Interchangeable with the manufacturers original equipment-the only cost effective aftermarket solution available. Installs easily, just install in engine block core hole. No longer necessary to remove frost plug or drain coolant-just coat wit NSCG silicone grease G-624 (not included), insert, and clip into place. Original equipment for Toyota, Chrysler-jeep, Hyundai, Kia, and General Motors applications (see application guide for details). Simplified application information-Entire range of manufacturers applications covered by only five part numbers.

Product Features:

Freeze plug heater cartridge

from

$124.99

WeatherTech Side Window Deflectors, offer fresh air enjoyment with an original equipment look, installing within the window channel. They are crafted from the finest 3 Millimeter acrylic material available. Installation is quick and easy, with no exterior tape needed. WeatherTech Side Window Deflectors are precision machined to perfectly fit your vehicle s window channel. These low profile window deflectors help to reduce wind noise and allow interior heat to escape. Our light tinted Side Window Deflectors are the only deflectors in the world made with a D.O.T. approved glazing material. Available in light and dark tint for most vehicles.

Product Features:

Offers Maximum Fresh Air Enjoyment
Optically Transparent OEM Quality
Sleek Aerodynamic Styling
Reduced Wind Noise
No Unsightly Exterior Tape
Minimizes Interior Heat When Parked: Helps Keep Side Windows Dry In The Rain
Precision Machined To Perfectly Fit Your Vehicle
Installed Inside The Window Channel

from

$89.99

AVS Low Profile Ventvisor has the smallest profile of side window deflectors available. By utilizing either In-channel or Outside Mount design (varies by application) AVS Low profile side window deflectors maintain the sleekest look for your vehicle while still allowing fresh air to circulate and not letting the weather outside your comfort. Comes with a Limited Warranty.

Product Features:

Precision Engineered For A Custom Fit On Your Vehicle With Stealthy Design For The Lowest Profile
Choose Internal (In-Channel) Or External (Above Door Glass) Mount Options
Easy Installation With No-Drilling Or Special Hardware Required
Attaches Easily With 3M Automotive-Grade Adhesive Above The Window
Impact-Resistant Acrylic Or Warp-Resistant ABS Construction
Available In Dark Smoke (Acrylic) or Matte Black (ABS) Finishes

from

$70.99

New Standard Replacement Undercar Shield

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$20.99

New Standard Replacement Undercar Shield

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$209.99

WeatherTech Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your vehicle and feature a raised lip to keep spills, dirt and grease off your vehicles interior, protecting your investment from normal wear and tear. WeatherTech Cargo Liners feature a textured finish that helps to keep cargo from shifting. Perfect for hauling just about anything from gardening supplies to construction materials, even the family pet. WeatherTech Cargo Liners meet FMVSS302 standards. Cargo Liners are proudly designed, engineered and manufactured with American made tooling in the USA. Available for car trunks, minivans and SUVs in Black, Tan or Grey.

Product Features:

Interior Protection From All Types Of Wear And Tear
Custom Molded Specifically For Your Vehicle
High Outside Lip That Helps Contain Spills
Quick And Easy Cleanup
A Skid Resistant Surface
Protects And Preserves The Cargo Area And Trunk Carpet
Toughness And Durability
Easy Installation
Limited Lifetime Warranty

from

$184.99

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

Patterned protection for your vehicle cargo area
Easy to install
Durable waterproof urethane-coated polyester fabric
Both the cargo area and the back of rear seat are covered and protected
Adjustable straps and side-release buckles attach around the vehicle headrests
Designed to allow split seat backs to work in the up or down position
Comes with a bumper flap that easily pulls out from underneath when needed

from

$69.99

AVS In-Channel Ventvisor® offers a sleek profile that helps keep rain out and lets fresh air in to reduce interior heat build up. It’s easy no-drill application makes installation and provides a custom fit for your vehicle. AVS; the creator of the side window deflector category, lets fresh air in while keeping rain out. The best exterior window protection with a large selection of window deflectors and for cars, trucks, SUV’s and CUV’s.

Product Features:

Precision engineered for a custom fit on your vehicle with modern, curved low-profile design
Installs in the window channel for a sleek, aerodynamic appearance
Made from durable, impact-resistant acrylic
Available in dark smoke finish

from

$69.99

With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!

Product Features:

Precision engineered for a custom fit on your vehicle with modern, curved design
Easy installation with no-drilling or special hardware required
Attaches easily with 3M automotive-grade adhesive above the window
Made from durable, impact-resistant acrylic
Available in dark smoke and chrome finishes

from

$11.99

New Standard Replacement Front License Plate Bracket, Without Hardware

Product Features:

Without Hardware, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$14.99

New Standard Replacement License Bracket, Japan Built

Product Features:

Korea Built Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$33.99

New Standard Replacement Front License Plate Bracket, Without F-Sport

Product Features:

Without F-Sport, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$119.99

The Rightline Gear Sport 2 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 2 is a popular size for many travelers.

Product Features:

Capacity: 15 cu ft
Dimensions: 42″ L x 34″ W x 18″ H
Designed for SUVs, minivans, and crossovers, WITH or WITHOUT a roof rack
100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

from

$89.99

The Range Jr Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

Dimensions: 36″ L x 32″ W x 15″ H
Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
Weatherproof + with welded seams and a urethane coated zipper
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

from

$109.99

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

Capacity: 10 cu ft
Dimensions: 36″ L x 30″ W x 16″ H
Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

from

$81.99

The Budge Ultra SUV Cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our Ultra SUV covers are fully breathable, with ultra-sonically welded seams for added durability. This soft, nonabrasive material will not harm the surface of your vehicle. Designed for indoor and outdoor use, the Ultra SUV Cover is designed to be breathable while it protects your vehicle. This improves airflow to reduce condensation and helps prevent mold and mildew. The Ultra cover features a full elastic hem and built-in grommets. This cover is gray in color and includes a storage bag and antenna patch. Designed to fit, this SUV cover fits SUVs 186″ L x 59″ W x 60″ H.

Product Features:

This SUV cover fits SUVs 186″ L x 59″ W x 60″ H.
This SUV cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
This SUV cover is water resistant and features ultrasonically welded seams for extra durability
Cover is suitable for short term outdoor protection and long-term indoor protection
Elasticized hem and sewn-in grommets for a secure fit

from

$109.99

The Budge Rain Barrier SUV cover offers easy to use, 100% waterproof indoor and outdoor protection. This SUV car cover is constructed from a 3 layer material consisting of an inside and outside layer of spun-bond polypropylene. The middle layer is made from a waterproof film. Unlike most waterproof SUV covers, the Budge Rain Barrier features micro-pore technology that allows condensation to escape as evaporated gas, giving your vehicle inside and outside protection. This cover is great for outdoor and indoor use. The soft, nonabrasive material will not harm the surface of your vehicle. This cover features a full elastic hem and built-in grommets. This cover is available in a gray color. Includes a storage bag and antenna patch. This SUV cover fits SUVs 186″ L x 59″ W x 60″ H.

Product Features:

This SUV cover fits SUVs 186″ L x 59″ W x 60″ H.
This waterproof SUV cover will defend against outdoor elements like rain, snow, sun, dirt, dust and more
This SUV cover is made from a 3 layer microporous material that makes an ultimate rain barrier
This vehicle cover features ultrasonically welded seams for extra durability
Elasticized hem and sewn-in grommets hold your SUV cover in place in windy-conditions

from

$99.99

Autocraft Easy Fit SUV cover offers excellent protection for your vehicles. 3 layers construction includes reflective UV resistant layer, water resistant layer and non-abrasive soft inside layer. The construction does not only prevent your vehicles from scratching but also protects against mold and mildew. Suitable for indoor and outdoor use. It designed with a full elastic, ultrasonic sewn hem and reinforced grommets to ensure a better fit and extreme durability. Bag included for convient storage.

Product Features:

Fit SUVs 15′-19′ (4.5m-5.8m)
Medium weight, breathable, non-abrasive fabric for indoor and outdoor use
Water resistant layer, protects against mold and mildew
UV treatment protects vehicle from sun damage
Full elastic and ultrasonic sewn hem to ensure a better fit and extreme durability
2 built-in reinforced grommets and 1 rope are included to keep your cover in place
Antenna hole patch included to provide additional protection from water or dust soaking into the hole that you cut for antenna
Bag included for easy storage

Lexus RX350 Interior Products

from

$284.99

from

$112.99

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

The rich appearance and feel of suede-like fabric
Custom tailored for a precise, snug fit
Protects your dash from sun damage and reduces windshield glare
Vents, sensors and trays remain fully functional
Simple installation with hook and loop fasteners

from

$541.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$221.99

from

$127.99

from

$137.99

from

$244.99

from

$167.99

from

$13.99

This seat belt buckle button stop is designed to match the appearance, fit and function of the original stop on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this seat belt buckle button stop is designed to match the appearance, fit and function of the original stop on specified vehicles.
Restores functionality – this buckle stop is made to fully restore appearance and functionality after the original part fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$408.99

from

$436.99

from

$101.99

from

$181.99

Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
Semi┐custom To Fit The Size And Type Of Vehicle
Machine Washable, Making It An Easy Accessory For Any Family

from

$261.99

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
Semi┐custom To Fit The Size And Type Of Vehicle
Machine Washable, Making It An Easy Accessory For Any Family
Machine Washable
Designed To Fit Bench Style Rear Seats

from

$251.99

Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
Semi-custom To Fit The Size And Type Of Vehicle
Machine Washable, Making It An Easy Accessory For Any Family
Machine Washable
Designed To Fit Bench Style Rear Seats

from

$172.99

from

$59.99

from

$547.99

Accelerator Pedal Sensor

from

$783.99

from

$144.30

Air Bag Clockspring

from

$345.99

from

$131.99

Looking for the best Lexus RX350 aftermarket replacement parts? Replacing worn and broken parts on your Lexus RX350? Check out our online catalog to find the best selection of aftermarket Lexus RX350 parts as well as real user reviews on Lexus RX350 replacement parts. Make an informed decision about every component you add to your RX350.

At Advance Auto, we’ve got you covered when it comes to getting your Lexus RX350 in tip top condition. We’ve got over 2,383 Lexus RX350 parts to choose from in popular categories like Audio and Video Products, Body Parts and Transmission Parts. If you’re looking for the best prices, try searching our Lexus RX350 parts catalog to compare OEM and aftermarket parts for your Lexus RX350.

Whether you need Lexus RX350 body parts, interior components, or custom Lexus RX350 parts you can find them online at Advance Auto. Want to order your Automotive Accessories online? Or maybe you need your Lexus Interior Products same day? No problem, you can pick up RX350 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Lexus RX350 parts has never been easier.

Advance Auto customers frequently search for the following types of Lexus RX350 auto parts. Check out customer reviews and ratings, and compare prices on the following Lexus RX350 parts:

People also search Advance Auto for these popular years of the Lexus RX350:

Lexus RX350 Parts

StrongArm – Liftgate Lift Support: 20.5" Ext Length, 6.8" Travel, 152 Lbs of Force, 1 Pk (Part No.D6135)

KAI – Hood Hinge (Part No.LX1236106)

KAI – GRILLE MOLDING (Part No.LX1212113)

Dorman – Window Regulator: Power, 1 Pack (Part No.752-735)

Dorman – Help – Exterior Door Handle Rear Left Rear Right (Part No.79943)

AISIN – Tailgate Latch (Part No.O20872539488ASC)

KAI – Bumper Cover Support Rail (Part No.LX1143101)

KAI – Bumper Grille Insert (Part No.LX1037102)

Dorman – Door Hinge Assembly Front Door Lower Left Or Upper Right (Part No.924-991)

Carquest Premium – Rain Sensor (Part No.FAA1042)

Dorman – Moulding Clip Head Dia 0.5 In. Shank Lng 0.62 In. Hole Dia 0.32 In. (Part No.963-529)

KAI – Spoiler (Part No.LX1093102)

Carquest – A/C Compressor Clutch Relay (Part No.R3130)

KAI – Bumper Impact Absorber (Part No.LX1170101C)

Dorman – Molding Clip Head Dia 0.5In Shank Long 0.62In Hole Dia 0.32In (Sold by each) (Part No.963-529BX)

Pentosin – PENTOSIN ATF 44 5L (Part No.1058212)

KAI – Fender Liner (Part No.LX1248101C)

Dorman – Spare Tire Hoist Assembly (Part No.924-633)

KAI – New Standard Replacement Grille (Part No.LX1200113)

Dorman – Hood Insulator Clip (Part No.963-088)

AutoCraft – INTERIOR DOOR HANDLE (Part No.79863)

Dorman – Help – Door Hinge Pin and Bushing Kit (Part No.38681)

KAI – Bumper Grille Insert (Part No.LX1037103)

AISIN – Door Lock Assembly (Part No.O3001848842ASC)

KAI – Bumper Cover Bracket (Part No.LX1042104)

Koyo – Automatic Transmission Seal (Part No.J507048821KOY)

Carquest Premium – Traction Control Switch (Part No.TRA1019)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 10 Quart (Part No.265-836)

Anchor – Transmission Mount: Left, 1 Piece (Part No.9236)

Needa Parts – Standard Engine Oil Drain Plug: 9/16-18 Thrd, 0.75 " Head, 1 Pack, sold by each (Part No.090-030)

Vaico – AT Filter Kit (Part No.J50103087377VCO)

Anchor – Torque Strut Motor Mount: Right, 1 Piece (Part No.9736)

Driveworks – Oil Seal (Part No.S-2025)

ATP – Shift Solenoid (Part No.RE-26)

Moveras – U151F – Automatic Transmission (Part No.M01763)

SKF – AT Output Shaft Seal (Part No.J2557262225SKF)

Dorman – Transmission Output Speed Sensor (Part No.917-603)

Carquest Premium – Neutral Safety Switch (Part No.CSA2111)

Dorman – Auto Trans Oil Cooler (Part No.J2040960490DOR)

National – Multi Purpose Seal (Part No.710419)

Elring – AT Filter O-Ring (Part No.J5001461422ELR)

Driveworks – Tapered Roller Bearing (Part No.S-32010X)

National – Shaft Repair Sleeve (Part No.99166)

National – Auto Trans Seal (Part No.711095)

Dorman – Transmission Output Speed Sensor (Part No.J5052270652DOR)

NTN – Differential Bearing (Part No.J7060741150NTN)

National – Automatic Transmission Transfer Shaft Seal (Part No.710987)

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

Covercraft – UVS100 Custom Sunscreen – Blue Metallic (Part No.UV11097BL)

Covercraft – UVS100 Custom Sunscreen – Blue Metallic (Part No.UV11431BL)

Dorman – Help – Keyless Remote Case (Part No.13670)

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Tan (Part No.2110163)

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Grey (Part No.2110112)

Dorman – Help – Floor Mat Retainer Clips (Part No.45188)

Kat’s – Engine Heater; Replacement Cord (Part No.28813)

Kat’s – Engine Heater Cartridge (Part No.11813)

WeatherTech – Low Profile, In-Channel, Dark Smoke, Acrylic, Set Of 4 (Part No.82494)

Auto Ventshade (AVS) – Low Profile Ventvisor Window Visors: In-Channel Mount, Smoke, Front And Rear, 4 Pc (Part No.994027)

KAI – Undercar Shield (Part No.LX1228130)

KAI – Undercar Shield (Part No.LX1228125)

WeatherTech – Cargo Liner (Part No.40377)

Covercraft – Cargo Area Liner (Part No.PCL6142GY)

Auto Ventshade (AVS) – Ventvisor Window Visors: In-Channel Mount, Smoke, Front And Rear, 4 Pc (Part No.194360)

Auto Ventshade (AVS) – Ventvisor Window Visors: Outside Mount, Smoke, Front And Rear, 4 Pc (Part No.94186)

KAI – License Plate Bracket (Part No.LX1068103)

KAI – License Plate Bracket (Part No.LX1068101)

KAI – License Plate Bracket (Part No.LX1068111)

Rightline Gear – Sport 2 Car Top Carrier (Part No.100S20)

Rightline Gear – Range Jr Car Top Carrier (Part No.100R50)

Rightline Gear – Sport Jr. Car Top Carrier (Part No.100S50)

Budge – Ultra SUV Cover, Grey, Size U1, Fits up to 15 ft. 6 in. L, 3 Layer Water Resistant Scratchproof (Part No.UD-1)

Budge – Rain Barrier SUV Cover Grey Size U1 Fits up to 15 ft. 6 in. L, Water Resistant Breathable (Part No.URB-1)

AutoCraft – SUV Cover, Blue 3 Layers, Fits SUVs 15′-19′, Medium-Duty, Water Resistant, Outdoor Use (Part No.AC4709)

Carquest Premium – Instrument Panel Dimmer Switch (Part No.SBC3093)

Dashmat – SuedeMat Dashboard Cover Faux-suede Material – Grey (Part No.81596-00-47)

Carquest Premium – Steering Wheel Motion Sensor (Part No.SBC4394)

Dorman – Toyota Hood Insulation Retainer (Part No.963-088D)

Carquest Premium – Automatic Headlight Sensor (Part No.CAA1307)

Carquest Premium – Combination Switch (Part No.SAE1699)