Ford Focus Wheels and Tires

Essential Ford Focus Wheels and Tires

Dorman – Wheel Nut M12-1.50 Mag , Short – 13/16 In. Hex, 1.452 In. Length (Part No.611-104)

Wheel Nut M12-1.50 Mag , Short - 13/16 In. Hex, 1.452 In. Length

from

$2.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Motorcraft – Wheel Hub (Part No.K7000564130MTR)

Wheel Hub

from

$179.56
Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:
  • Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
  • Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
  • Special bearing seals to help keep out contaminants, the number one cause of bearing failure
  • Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
  • Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
  • Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
  • Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
  • Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
  • Integral bearing races specifically designed to each application, no one-size-fits-all solution
  • Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
  • Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
  • Original equipment specifications minimize any possibility of the hub cracking
  • Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
  • Tapered roller bearings for high load rates when specified
See More

National – Wheel Bearing: Direct Fit, 1 Piece (Part No.516007)

Wheel Bearing: Direct Fit, 1 Piece

from

$79.99
Manufactured with premium materials, National taper bearing assemblies are designed and engineered to meet OE specifications.

Product Features:
  • CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
  • PREMIUM MATERIALS — Precision manufactured using high-quality materials for durability and performance
  • OE-STYLE DESIGN — Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

Dorman – Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" Length, Gunmetal, 20 Locks/1 Key (Part No.711-355H)

Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" Length, Gunmetal, 20 Locks/1 Key

from

$44.99
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:
  • Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
  • Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
  • Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, 20 Piece (Part No.VS-925A)

Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, 20 Piece

from

$8.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:
  • TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
  • 0.453″ rim hole compatiblity
  • 200 PSI maximum cold inflation pressure
See More

Dorman – Wheel Lug Nut Cover: Push Type, 19 mm Hex, 29 mm Depth, Plastic, Gray, 1 Pack (Part No.611-646.1)

Wheel Lug Nut Cover: Push Type, 19 mm Hex, 29 mm Depth, Plastic, Gray, 1 Pack

from

$5.49
This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.

Product Features:
  • Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance
  • Quality materials – manufactured for durability and a quality finish
  • Simple installation – no special tools required
  • Quality tested – this part has undergone dimensional testing to ensure a quality fit
See More

COAST TO COAST – 15 Inch, 6 Spoke, Silver, Plastic, Set Of 4, Spring Steel Clip (Part No.IWC43215S)

15 Inch, 6 Spoke, Silver, Plastic, Set Of 4, Spring Steel Clip

from

$65.99
Coast to Coast International Wheel Covers are a quick and cost effective alternative to replacing factory OEM wheel covers that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • Designed And Manufactured To Fit Steel Wheels And Emulate OEM Designs
  • Constructed From High-Quality, Durable, Automotive Grade ABS
  • Two Layers Of Clear Coat Enhance And UV Protect The Finish
  • A Cost Effective Alternative To Replace OEM Wheel Covers That Have Been Lost, Stolen Or Worn Over Time
  • Installs In Minutes Without Tools
  • Spring steel clip retention, Easier to install, better wheel retention
See More

Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)

TPMS Ni Plated Valve Core, 100 Pack

from

$23.99
Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:
  • DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
  • DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
  • SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
  • VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
  • PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Dorman – Wheel Bearing Dust C (Part No.K7005691142DOR)

Wheel Bearing Dust C

from

$12.58
Wheel Bearing Dust C

Dill Air Control – TPMS Service Kit: Plastic Clip For Locking Band Sensor On Cradle, 20 Piece (Part No.1026)

TPMS Service Kit: Plastic Clip For Locking Band Sensor On Cradle, 20 Piece

from

$3.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:
  • Plastic clip for locking band sensor on cradle
See More

Motorcraft – Wheel Seal (Part No.K8010285467MTR)

Wheel Seal

from

$61.09
The right fit for Ford and Lincoln braking systems

Product Features:
  • Need to be replaced when packing bearings during brake repair
  • Designed to keep out contaminants, the number one cause of bearing failure
  • Recommended by Ford Motor Company
  • High quality at a high value
See More

Dorman – 16 X 6.5 In. Steel Wheel (Part No.939-141)

16 X 6.5 In. Steel Wheel

from

$137.99
Damaged your wheel, or looking to upgrade? This wheel is specifically designed to directly replace the original wheel on certain vehicle applications. It is thoroughly tested to meet safety standards for reliable performance.

Product Features:
  • Direct replacement – this wheel is designed to match the fit and structural appearance of the original wheel on specific vehicle years, makes and models
  • Cost-effective solution – offers original equipment quality and appearance for a competitive price
  • Thoroughly tested – dynamic radial testing, radial run-out testing, and axial run-out testing ensures performance
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)

Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers

from

$68.99
Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:
  • MX-Sensor Components
  • 4 Metal Valves
  • 4 Rubber Valves
  • Rubber Gasket (2×10 pcs)
  • Screw Nut (2×10 pcs)
  • Washer (2×10 pcs)
  • Metal Valve Cap (2X10 pcs)
  • Rubber Valve Cap (2X10 pcs)
  • Valve Core (2X10 pcs)
See More

Schrader – TPMS Sensor Service Kit (Part No.20018)

TPMS Sensor Service Kit

from

$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:
  • DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
  • DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
  • SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
  • VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
  • PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Schrader – Direct Fit Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.20315)

Direct Fit Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece

from

$62.99
Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.

Product Features:
  • DIRECT REPLACEMENT: 1 for 1 replacement sensor
  • QUICK AND EASY: TPMS sensors are ready out of the box
  • VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
  • SCHRADER QUALITY: TPMS sensors are produced in Schraders secure and highly automated OE manufacturing facilities
  • RELEARN PROCEDURE: A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

REDI-Sensor – REDI-Sensor Metal Clamp-in Stem 315 MHz — 1 Sensor (Part No.SE10007)

REDI-Sensor Metal Clamp-in Stem 315 MHz -- 1 Sensor

from

$53.99
REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.

Product Features:
  • Metal clamp-in stem.
  • Works with most major TPMS Scan tools
  • Reduces SKUs
  • OE Designed and Validated
  • Advance anodization of valve stems and hex nuts
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

MOOG Hub Assemblies – Suspension Knuckle Assembly (Part No.LK004)

Suspension Knuckle Assembly

from

$403.99
Backed by superior materials and rigorous testing, MOOG complete knuckle assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • COMPLETE SOLUTION — Pre-assembled for convenience and includes premium parts like a MOOG knuckle, MOOG wheel hub with studs, bearing, axle nut, backing plate and premium ball joint (where applicable) for a complete solution
  • EASY TO INSTALL — Innovative bolt-on, pre-assembled solution designed to make troublesome bearing replacement easier and eliminate the need for special tools or a press
  • CORROSION PROTECTION — e-Coated backing plate and knuckle provides long-lasting corrosion resistance
  • STRONG AND DURABLE — Engineered with high-quality materials to provide long life and dependability
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Schrader – TPMS Valve Stem Cap, Black, 100 Pack (Part No.20595-100)

TPMS Valve Stem Cap, Black, 100 Pack

from

$29.99
Schrader service caps are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:
  • DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
  • DURABLE: Caps are constructed of high-quality materials to help ensure reliable performance and long service life
  • SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
  • VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
  • PROPER SERVICE: Caps are intended for one-time use only and must be replaced with every tire change
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Dill Air Control – TPMS Banded Sensor Cradle (Part No.1025)

TPMS Banded Sensor Cradle

from

$8.79
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:
  • Metal cradle: holds 1048 and 1048-HP sensors
See More

Dorman – 15 X 6 In. Steel Wheel (Part No.939-115)

15 X 6 In. Steel Wheel

from

$99.99
Damaged your wheel, or looking to upgrade? This wheel is specifically designed to directly replace the original wheel on certain vehicle applications. It is thoroughly tested to meet safety standards for reliable performance.

Product Features:
  • Direct replacement – this wheel is designed to match the fit and structural appearance of the original wheel on specific vehicle years, makes and models
  • Cost-effective solution – offers original equipment quality and appearance for a competitive price
  • Thoroughly tested – dynamic radial testing, radial run-out testing, and axial run-out testing ensures performance
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Dometop, 1.22" Length, Chrome (Sold by each) (Part No.611-074)

Wheel Lug Nut: M12-1.50 Thread, Conical 60, Dometop, 1.22" Length, Chrome (Sold by each)

from

$3.79
The original lug nut on certain vehicles has a failure-prone two-piece design that makes rust common and repair difficult. This Dorman OE FIX replacement has a one-piece, carbon steel design to prevent future problems. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:
  • Wheel Nut M12-1.50 Dometop – 19mm Hex, 31mm Length
  • Wheel Lug Nut: M12-1.50 Thread, Conical 60, Dometop, 1.22″ Length, Chrome (Sold by each)
  • Improved design – this replacement lug nut changes the original two-piece design to one piece for greater reliability
  • Thoroughly tested – part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards
See More

Dorman – Wheel Bearing Retaining Ring (Part No.933-202)

Wheel Bearing Retaining Ring

from

$14.49
This wheel bearing retaining ring is designed to match the fit and function of the original ring on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this wheel bearing retaining ring is designed to match the fit and function of the original ring on specified applications
  • Restores functionality – this retaining ring is made to fit and fully restore part functionality after the original ring fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

McGard – Gold SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size) (Part No.65557GD)

Gold SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size)

from

$194.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with gold PVD producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
See More

Huf North America – Rubber – straight in screw (Part No.RDV043)

Rubber - straight in screw

from

$2.99
Rubber – straight in screw

Dorman – Pik-a-Nut – Wheel Stud : Serrated Stud, M12-1.50 Thread Size, RHT, 1 Pack (Part No.98532.1)

Wheel Stud : Serrated Stud, M12-1.50 Thread Size, RHT, 1 Pack

from

$2.29
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:
  • Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
  • Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
  • Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Helping You Find the Right Wheels and Tires for Your Ford Focus

You love your Focus. So we’ve made it easier than ever to help you find Ford Focus Wheels and Tires in our online catalog. Our inventory holds 216 aftermarket and OEM Wheels and Tires for your Ford Focus, ranging from $1.99 to $7,321.99.

We offer parts from 20 brands trusted to make quality Wheels and Tires for your Ford Focus. Before you buy, take some time to read through customer reviews. We currently have 41,831 reviews of Ford Focus Wheels and Tires from previous customers. Some of the top rated parts include Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece with 3.3 stars and VDO Metal Clamp-in Stem REDI-Sensor with 4.5 stars.

Find your Focus Wheels and Tires here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Focus part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Wheels and Tires Brands for Your Ford Focus

Our inventory holds Wheels and Tires for your Ford Focus from 20 trusted brands. You’ll find OEM and aftermarket parts from brands like Dorman, Autel, and Schrader, all of which can keep that Ford happy.

Top-Rated Dorman Wheels and Tires

Leading Dorman Wheels and Tires

We carry Dorman brand parts for your Ford Focus across several catalog categories, including Wheel Hardware. Some of our most reviewed Dorman parts include:

FAQs for Ford Focus Wheels and Tires

What are the most purchased Wheels and Tires for the Ford Focus?

Out of 216 Wheels and Tires for the Ford Focus, the most popular in our inventory are:

What are the top-rated Ford Focus Wheels and Tires?

Top-rated Wheels and Tires for your Ford Focus based on customer reviews/ratings are:
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
from $41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
“Was everything I expected”
VDO Metal Clamp-in Stem REDI-Sensor
from $48.99
(54)
VDO Metal Clamp-in Stem REDI-Sensor
“It works perfectly ! Will buy again for my Acura MDX Thanks to advanceautoparts.”
VDO Rubber Snap-in Stem REDI-Sensor
from $49.99
(26)
VDO Rubber Snap-in Stem REDI-Sensor
“Good quality and price for this Tire Pressure Monitoring Sensor.”