Belts and Hoses in Clinton, MD

When it comes to maintaining your vehicle, ensuring your belts and hoses are in top condition is crucial for smooth operation. Belts, such as the serpentine belt, are essential for powering various engine components, while hoses transport fluids throughout your vehicle’s systems. Over time, these parts can wear down due to heat, friction, or age, leading to problems such as overheating or loss of power steering. When purchasing belts and hoses, consider factors like material durability, fit, and compatibility with your specific make and model. Additionally, it’s wise to check related components, including the tensioner, idler pulleys, and radiator hoses, as they may also need replacement to prevent future issues.

If you’re located in Clinton, MD, you’re in luck! The Advance Auto Parts store at 8930 Woodyard Rd Clinton, MD 20735, with the phone number (301) 868-7386, is conveniently situated for those in the surrounding neighborhoods and near major highways. With easy access from Route 5 and nearby residential areas, it’s an optimal stop for anyone looking to update their vehicle’s belts and hoses, alongside a host of other essential auto parts.

In addition to a wide selection of parts, our Clinton store offers valuable in-store services including battery installation, engine code scanning, and collaborative loaner tool programs. Plus, we provide easy options for same-day curbside and in-store pickups, making it simpler for you to get the parts you need, when you need them. Whether you’re a DIY enthusiast or you need a bit of assistance, our knowledgeable staff is here to help you drive away safely and confidently!

Top Selling Serpentine and V Belts

Dayco – Poly Rib Belt Serpentine Belt; 93.5 Long, 6 Rib Count (Part No.5060935)

Poly Rib Belt Serpentine Belt; 93.5 Long, 6 Rib Count

from

$47.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count (Part No.5060930)

Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count

from

$64.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count (Part No.930K6)

Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count

from

$40.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 45.08 Long, 6 Rib Count (Part No.5060450)

Poly Rib Belt Serpentine Belt; 45.08 Long, 6 Rib Count

from

$29.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count (Part No.378K4)

Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count

from

$25.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Performance Tool – Jaw Gear Puller 4" (Part No.W136P)

Jaw Gear Puller 4"

from

$24.29
The Performance Tool W136P 4-Inch 3 Jaw Gear Puller is made of heat treated alloy steel, drop forged for strength, with a chrome plated finish. A 4-Inch 3 jaw gear puller.

Product Features:
  • Heat treated alloy steel
  • Drop forged for strength
  • Chrome plated finish
  • Size: 4-Inch 3 Jaw
See More

Driveworks – Poly Rib Belt Serpentine Belt; 90.55 Long, 6 Rib Count (Part No.905K6)

Poly Rib Belt Serpentine Belt; 90.55 Long, 6 Rib Count

from

$27.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 41 Long, 6 Rib Count (Part No.5060410)

Poly Rib Belt Serpentine Belt; 41 Long, 6 Rib Count

from

$34.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 94.09 Long, 6 Rib Count (Part No.5060940)

Poly Rib Belt Serpentine Belt; 94.09 Long, 6 Rib Count

from

$56.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 77.1 Long, 6 Rib Count (Part No.5060770)

Poly Rib Belt Serpentine Belt; 77.1 Long, 6 Rib Count

from

$40.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 101.58 Long, 6 Rib Count (Part No.1015K6)

Poly Rib Belt Serpentine Belt; 101.58 Long, 6 Rib Count

from

$31.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Serpentine Belt Kit; With Belt and Tensioner, 2 Piece Set (Part No.5040378K1)

Serpentine Belt Kit; With Belt and Tensioner, 2 Piece Set

from

$52.99
Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Engineered to match OE specifications with unique features that enhance vehicle performance and safety
  • For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
  • Provides all the parts needed in one box, helping simplify installation
See More

Local Clinton Stores for Belts and Hoses

Advance Auto Parts #6249
8930 Woodyard Rd
Clinton, MD 20735
(301) 868-7386
Get Directions Go to Store Page Check Availability at This Store

Top Selling Heater Hoses

Carquest Bulk Hose Tubing – Standard Heater Hose 5/8" I.D. (Sold Per Foot) (Part No.CQ1726)

Standard Heater Hose 5/8" I.D. (Sold Per Foot)

from

$1.99
This bulk item is sold Per Foot. Replacement coolant hose for most cars and light trucks. This standard-duty hose is similar to the SAE20R3 specification for normal-duty service. The hose withstands the abuse of corrosive solutions and additives, and is weathering resistant for long life.

Product Features:
  • Sold per foot
  • Replacement coolant hose for most cars and light trucks.
  • This standard-duty hose is similar to the SAE20R3 specification for normal-duty service.
  • The hose withstands the abuse of corrosive solutions and additives, and is weathering resistant for long life.
See More

Carquest Bulk Hose Tubing – Bulk Standard Heater Hose 1" I.D. (12 inches) (Part No.CQ1828-25)

Bulk Standard Heater Hose 1" I.D. (12 inches)

from

$2.49
This bulk item is sold Per Foot. Replacement coolant hose for most cars and light trucks. This standard-duty hose is similar to the SAE20R3 specification for normal-duty service. The hose withstands the abuse of corrosive solutions and additives, and is weathering resistant for long life.
See More

Carquest Bulk Hose Tubing – Bulk Standard Heater Hose 1/2" I.D. (Sold by the foot) (Part No.CQ1725)

Bulk Standard Heater Hose 1/2" I.D. (Sold by the foot)

from

$1.99
Replacement coolant hose for most cars and light trucks. This standard-duty hose is similar to the SAE20R3 specification for normal-duty service. The hose withstands the abuse of corrosive solutions and additives, and is weathering resistant for long life.

Product Features:
  • This bulk item is sold Per Foot
  • 1/2″ ID
  • Standard duty replacement heater hose for most cars and light trucks
  • Temperature Specification: -40 – 212 Deg. F
See More

Dorman – Heater Hose Connector (Part No.800-401)

Heater Hose Connector

from

$14.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 21 Inch Length (Part No.87793)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 21 Inch Length

from

$51.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 Inch Length (Part No.87771)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 Inch Length

from

$37.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 21 1/4 Inch Length (Part No.87792)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 21 1/4 Inch Length

from

$37.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 48 Inch Length (Part No.80406)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 48 Inch Length

from

$18.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 26 1/2 Inch Length (Part No.88429)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 26 1/2 Inch Length

from

$56.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 17 1/2 Inch Length (Part No.88389)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 17 1/2 Inch Length

from

$36.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length (Part No.87739)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length

from

$36.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 1/2 Inch Diameter, 6 Inch Length (Part No.80393)

Molded Heater Hose; EPDM Rubber, 1/2 Inch Diameter, 6 Inch Length

from

$11.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Top Selling Belt Tensioners

Dayco – Automatic Belt Tensioner (Part No.89263)

Automatic Belt Tensioner

from

$59.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
See More

Dayco – Automatic Belt Tensioner (Part No.89291)

Automatic Belt Tensioner

from

$49.49
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
  • This tensioner is another Dayco product proudly made in the USA
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999544A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$59.99
Litens was the Original Equipment (O.E.) supplier of this Ford /Lincoln tensioner and offers this “O.E. Exact”

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Dayco – Automatic Belt Tensioner (Part No.89245)

Automatic Belt Tensioner

from

$66.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999366A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$69.99
This Litens supplied tensioner is manufactured to original equipment specifications. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Heavy duty thermoplastic pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • Installation instructions included
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999010A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$51.99
This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular General Motors tensioner. This “O.E. Exact”

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999581A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$76.99
Litens was the Original Equipment (O.E.) supplier of this Chrysler tensioner and offers this “O.E. Exact”

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Dayco – Automatic Belt Tensioner (Part No.89378)

Automatic Belt Tensioner

from

$62.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
  • This tensioner is another Dayco product proudly made in the USA
See More

Litens – Accessory Drive Belt Tensioner, Original Equipment Quality (Part No.910032A)

Accessory Drive Belt Tensioner, Original Equipment Quality

from

$137.99
This Litens supplied tensioner is manufactured to original equipment specifications. This part is specifically designed for Cummins 5.9/6.7L Diesel applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Heavy duty steel pulley construction.
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • Installation instructions included
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999181A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$70.99
This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular tensioner used in Chrysler/Jeep and Mitsubishi vehicles. This “O.E. Exact”

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Professional Mechanics will change this tensioner in approx. 1 hour +.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999410A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$99.99
This Litens supplied tensioner is manufactured to original equipment specifications. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Heavy duty thermoplastic pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • Install pin included for ease of installation
  • Installation instructions included
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999671A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$90.99
Litens was the Original Equipment (O.E.) suppliers of this Honda/Acura tensioner and offers this “O.E. Exact”

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • 2 – Heavy Duty Steel Pulleys with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More