2010 Ford Ranger Wheel Bearings
More 2010 Ford Ranger Wheel Bearings
Find your specific 2010 Ford Ranger original or aftermarket Wheel Bearings below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2010 Ford Ranger Wheel Bearings
SKF – Wheel Bearing Race (Part No.K8002345514SKF)
from
$7.61
The SKF Wheel Bearing Race is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
SKF – Wheel Bearing Race (Part No.K8002345515SKF)
from
$10.15
The SKF Wheel Bearing Race is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
FAG US – TAPERED ROLLER BEARI (Part No.KT6)
from
$13.99
TAPERED ROLLER BEARI
FAG US – TAPERED ROLLER BEARI (Part No.30205A)
from
$39.49
TAPERED ROLLER BEARI
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-513058)
from
$29.49
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
National – Bearings (Part No.M86649)
from
$18.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Axle Repair Bearing (Part No.S-RP-6408)
from
$24.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
FAG US – TAPERED ROLLER BEARI (Part No.KT2)
from
$9.79
TAPERED ROLLER BEARI
FAG US – BEARING CONE (Part No.KJL69349)
from
$15.79
BEARING CONE
National – Wheel Bearing: Direct Fit, 1 Piece (Part No.513058)
from
$48.99
Manufactured with premium materials, National taper bearing assemblies are designed and engineered to meet OE specifications.
Product Features:
See More
Product Features:
- CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS — Precision manufactured using high-quality materials for durability and performance
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
FAG – Wheel Bearing (Part No.K8000323128FAG)
from
$14.98
FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Maintenance free
- Premium modified bearing steel
FAG US – WHEEL BEARING (Part No.102583)
from
$43.49
WHEEL BEARING
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-6408)
from
$11.29
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
FAG US – AXLE BEARING (Part No.FC67148.5)
from
$10.79
AXLE BEARING
National – Wheel Bearing: Direct Fit, 1 Piece (Part No.RW-207-CCRA)
from
$26.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST — Advanced heat treatment process for strength
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
SKF – Wheel Bearing (Part No.K8000195029SKF)
from
$22.72
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.
Product Features:
See More
Product Features:
- Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
- 100% tested to the actual OE specifications per part number for fit, form and function
- High quality steel and surface finishes
- Proper implementation of heat treatment
Dorman – Wheel Bearing and Hub Assembly: Front, 5 Studs (Part No.951-055)
from
$232.99
This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.
Product Features:
See More
Product Features:
- Complete repair – this assembly includes the wheel hub and application-specific bearing components.
- Saves time – eliminates work required to remove individual corroded components.
- Reliable fit – precision-engineered to match the dimensions of original equipment
- Trustworthy quality – engineered and tested in the United States
Driveworks – Wheel Bearing and Hub Assembly: 5 Studs (Part No.NT515014)
from
$86.99
WJB Automotive wheel hub assemblies are made with high precision through state-of-the-art technology and manufactured with strict quality-control criteria. Every wheel hub assembly is specifically designed to fit the designated applications and may be used as a direct replacement for the original part. Each part is engineered using OE data and measurements to ensure fitment, performance, and longevity.
Product Features:
See More
Product Features:
- Fitment and function are ensured by precision machining, rigorous testing, and meticulous inspection of material and components.
- WJB Automotive wheel hub assemblies are designed to meet stringent fatigue requirements in order to reduce premature failure.
- Reinforced seal design material allows for optimal performance in harsh environments.
- WJB Automotive wheel hub assemblies undergo heat treatment and cold-forming processes that harden the surface ensuring high-temperature resistance and durability.
- Where applicable, pre-installed speed sensors will automatically sync to the vehicle’s anti-lock braking system upon successful installation and provide accurate speed-reading data.
- Brand may vary by location
National – Bearings (Part No.A-35)
from
$25.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Taper Bearing Cone (Part No.S-LM-603049)
from
$10.79
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Motorcraft – Wheel Hub Assembly (Part No.K70011350109MTR)
from
$240.30
Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.
Product Features:
See More
Product Features:
- Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
- Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
- Special bearing seals to help keep out contaminants, the number one cause of bearing failure
- Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
- Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
- Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
- Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
- Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
- Integral bearing races specifically designed to each application, no one-size-fits-all solution
- Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
- Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
- Original equipment specifications minimize any possibility of the hub cracking
- Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
- Tapered roller bearings for high load rates when specified
Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-37)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
MOOG Hub Assemblies – Wheel Bearing and Hub Assembly: Front, 5 Studs (Part No.515013)
from
$246.99
Product Features:
See More
- EXTENDED SERVICE LIFE – Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT – Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL – Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION – Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- DAMAGE RESISTANCE – Abrasion-resistant ABS cord resists damage, contamination and vibration that may lead to premature wear
FAG – Wheel Bearing (Part No.K800012058FAG)
from
$33.67
FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Maintenance free
- Premium modified bearing steel
FAG US – BEARING CONE (Part No.KLM11949)
from
$10.49
BEARING CONE
Dorman – Wheel Bearing and Hub Assembly: Front, 5 Studs (Part No.951-837)
from
$278.99
This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.
Product Features:
See More
Product Features:
- Complete repair – this assembly includes the wheel hub and application-specific bearing components.
- Saves time – eliminates work required to remove individual corroded components.
- Reliable fit – precision-engineered to match the dimensions of original equipment
- Trustworthy quality – engineered and tested in the United States
FAG US – TAPERED ROLLER BEARI (Part No.KT37)
from
$28.49
TAPERED ROLLER BEARI
Driveworks – Wheel Hub Assembly (Part No.NT515026)
from
$162.99
Driveworks Wheel hub assemblies & Bearings are integrated designed, they will meet your specific vehicle application and also provide the same or better performance, durability, and reliability you expect from OE. The inside ball or tapered bearing sealed with lifetime lubrication supports the vehicle’s rolling weight and provides a smooth and quiet rotation of the wheel. The design also enables lower total system cost, easier installation and longer service lifetime. The Wheel hub assemblies & Bearings come complete with new wheel studs, hub and bearings. The assembly also includes new ABS Wheel Sensors where applicable.
Product Features:
See More
Product Features:
- High quality materials ensure long service life
- Integral raceway provides proper clearance between the roller and bearing riding surfaces
- Precision-matched components deliver smooth and quiet operation
- Broad range of designs and custom-tailored to specific applications and operating conditions
- ABS Components and Bearing Preload 100% Tested To OE Specs
- Premium seals, both inboard and outboard, protect the bearing
- Brand may vary by location
Popular 2010 Ford Ranger Wheel Bearings Categories
2010 Ford Ranger Wheel Bearings
Maybe you’re in the middle of a full rebuild of that 2010 Ford Ranger. Maybe you just need a couple of Wheel Bearings. Either way, Advance Auto Parts has 25 different Wheel Bearings in our inventory ranging from $7.61 to $298.99. That means you can find the exact parts or products you need to keep that 2010 Ford Ranger running smoothly.
Wheel Bearings are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 2010 Ford Ranger. Driveworks, National, and Carquest Professional are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Wheel Bearings for your 2010 Ford Ranger, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 495 reviews in this category, some of the top rated parts include Multi Purpose Bearing with 4.1 stars and Taper Bearing Cone with 5.0 stars.
So if you’re in the market for aftermarket Wheel Bearings to keep your 2010 Ford Ranger rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Wheel Bearings Brands To Make Your 2010 Ford Ranger Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 Ford Ranger demands trusted brand parts and products to keep it running. Many trusted brands of Wheel Bearings make up Advance Auto Parts’ inventory, and all are ready to help make your Ranger the best it can be. Be sure to browse some of our top Wheel Bearings brands and parts.
Popular MOOG Hub Assemblies Wheel Bearings
We carry MOOG Hub Assemblies parts in our stock across Front Wheel Bearings categories, plus more. For a 2010 Ford Ranger, our most popular MOOG Hub Assemblies Wheel Bearings include:
Top 2010 Ford Ranger Wheel Bearings from Driveworks
Driveworks products are another trusted brand when it comes to Wheel Bearings for your 2010 Ford Ranger. Popular Driveworks parts include:
FAQs for 2010 Ford Ranger Wheel Bearings
What are the most purchased Wheel Bearings for the 2010 Ford Ranger?
Out of 25 Wheel Bearings for the 2010 Ford Ranger, the most popular in our inventory are:
from
$183.99
This product is not rated
Hub Assembly with Wheel Bearing 94-48755
Front Wheel Bearings
What are the top-rated 2010 Ford Ranger Wheel Bearings?
Top-rated Wheel Bearings for your 2010 Ford Ranger based on customer reviews/ratings are:
from
$24.99
(1)
Bearings
“Add specified rear wheel bearings, but front wheel bearing were sent. Now I’m stuck with a pair of front wheel bearing that I had to pay packing and s”
