1989 Ford Ranger Ignition and Tune-Up Products

Essential 1989 Ford Ranger Ignition and Tune-Up Products

Motorcraft – Spark Plug: 30,000-Mile Interval & RFI Reduction (Part No.SP-419)

Spark Plug: 30,000-Mile Interval & RFI Reduction

from

$2.99
Motorcraft Spark Plug with 30,000-Mile Interval and RFI Reduction is designed, engineered, and recommended by Ford Motor Company. This spark plug is the same part installed when the engine rolled off the assembly line, ensuring OEM quality. It features a copper core electrode and a nickel chromium alloy side electrode for excellent heat dissipation and durability. The resistor reduces radio frequency interference (RFI) and electrode erosion, while the copper-glass seal bonds the insulator and terminal post center electrode together, ensuring full required voltage at the spark gap and a gas-tight seal. With a 30,000-mile service interval and a tapered seat type, this spark plug offers reliable performance and longevity.

Product Features:
  • Same part installed when the engine rolled off the assembly line
  • 30,000-mile service interval
  • Copper core electrode and nickel chromium alloy side electrode for excellent heat dissipation and durability.
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
  • Copper-glass seal bonds insulator and terminal post center electrode together to ensure full required voltage at spark gap and a gas-tight seal
  • OEM Quality Assurance: Designed, engineered, and recommended by Ford Motor Company, this spark plug is the same part installed when the engine rolled off the assembly line, ensuring original equipment manufacturer (OEM) quality.
See More

Carquest Premium – Distributor Ignition Pickup (Part No.MEC2265)

Distributor Ignition Pickup

from

$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Motorcraft – Spark Plug Wire: 2 Year Warranty Unlimited Miles, Set of 6 Wires (Part No.WR-5791)

Spark Plug Wire: 2 Year Warranty Unlimited Miles, Set of 6 Wires

from

$82.99
Motorcraft Plug Wires are Manufactured of premium-quality materials to strict Ford Engineering standards. High-Dielectric Insulation helps maintain and control voltage delivery while reducing Radio Frequency Interference. EPDM/Silicone wire jacket, spark plug & coil/ distributor insulators help protect against oil and high temperatures. Optimized wire lengths help minimize part numbers while still providing proper fit. Designed and Tested to Stringent Ford Standards.

Product Features:
  • Backed by Motorcraft’s Service Parts Warranty
  • Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
  • Optimized wire lengths help minimize part numbers while still providing proper fit.
  • Wires are optimum lengths for easy installation.
  • EPDM/Silicone wire jacket, spark plug AND coil / distributor insulators help protect against oil and high temperatures.
  • Motorcraft ignition components help prevent false check engine lights.
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1175)

Ignition Coil Connector

from

$45.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ignition Switch Connector (Part No.PTA1283)

Ignition Switch Connector

from

$8.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest – Distributor Cap (Part No.24C1006)

Distributor Cap

from

$12.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

DENSO – Spark Plug Wire Set: Carbon Core, 4 Wire Set (Part No.671-4065)

Spark Plug Wire Set: Carbon Core, 4 Wire Set

from

$51.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Carquest Premium – Distributor T2697: 100% New, With Cap and Rotor (Part No.T2697)

Distributor T2697: 100% New, With Cap and Rotor

from

$143.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

JBA Performance – W0675 Ignition Wires 01-05 Ranger 05-10 Mustang 4.0L Red (Part No.W0675)

W0675 Ignition Wires 01-05 Ranger 05-10 Mustang 4.0L Red

from

$121.99
JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.

Product Features:
  • JBA Performance Exhaust W0675 Ignition Wires 01-05 Ranger 05-10 Mustang 4.0L Red
  • Extra thick diameters for improved under hood appearance
See More

JBA Performance – W06479 Ignition Wires 98-00 Ranger 3.0L Blue (Part No.W06479)

W06479 Ignition Wires 98-00 Ranger 3.0L Blue

from

$139.99
JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.

Product Features:
  • JBA Performance Exhaust W06479 Ignition Wires 98-00 Ranger 3.0L Blue
  • Extra thick diameters for improved under hood appearance
See More

Carquest Premium – Ignition Control Module Connector (Part No.PTA1257)

Ignition Control Module Connector

from

$15.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ignition Control Module Connector (Part No.PTA1296)

Ignition Control Module Connector

from

$10.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Motorcraft – Spark Plug Wire: 2 Year Warranty Unlimited Miles, Set of 4 Wires (Part No.WR-6059)

Spark Plug Wire: 2 Year Warranty Unlimited Miles, Set of 4 Wires

from

$51.99
Motorcraft Plug Wires are Manufactured of premium-quality materials to strict Ford Engineering standards. High-Dielectric Insulation helps maintain and control voltage delivery while reducing Radio Frequency Interference. EPDM/Silicone wire jacket, spark plug & coil/ distributor insulators help protect against oil and high temperatures. Optimized wire lengths help minimize part numbers while still providing proper fit. Designed and Tested to Stringent Ford Standards.

Product Features:
  • Backed by Motorcraft’s Service Parts Warranty
  • Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
  • Optimized wire lengths help minimize part numbers while still providing proper fit.
  • Wires are optimum lengths for easy installation.
  • EPDM/Silicone wire jacket, spark plug AND coil / distributor insulators help protect against oil and high temperatures.
  • Motorcraft ignition components help prevent false check engine lights.
See More

JBA Performance – W06499 Ignition Wires 02-03 3.0L Ranger Blue (Part No.W06499)

W06499 Ignition Wires 02-03 3.0L Ranger Blue

from

$92.99
JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.

Product Features:
  • JBA Performance Exhaust W06499 Ignition Wires 02-03 3.0L Ranger Blue
  • Extra thick diameters for improved under hood appearance
See More

Carquest Premium – Ignition Switch (Part No.CSA1045)

Ignition Switch

from

$28.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Ignition Switch (Part No.CS120)

Ignition Switch

from

$23.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Victor Reinz – Distributor O-Ring (Part No.41-10443-00)

Distributor O-Ring

from

$4.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI (Part No.31179)

Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI

from

$143.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:
  • Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
  • Incl. both socket-style and spark plug-style boots and terminals
  • Includes Mini-Stripper-Crimper For Factory Style Crimps
  • Size Includes [6] 90 Deg. Boots/Terminals
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

MSD Ignition – Wire Set; Super Conductor; Ford 2300 4-cyl. (Part No.31259)

Wire Set; Super Conductor; Ford 2300 4-cyl.

from

$108.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Bolt-on Performance
  • Conductor core features DuPont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

Carquest – Distributor Rotor (Part No.D164)

Distributor Rotor

from

$26.99
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:
  • High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
  • The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
  • All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
  • Offering thousands of high-quality pigtails & sockets for nearly every electrical job
See More

Driveworks – Distributor Rotor (Part No.23067)

Distributor Rotor

from

$11.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Dorman – 6 – Wire Ford Ignition Module (Gray) (Part No.85130)

6 - Wire Ford Ignition Module (Gray)

from

$23.99
This ignition harness is designed to match the fit and function of the original harness on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this ignition harness is designed to match the fit and function of the original harness on specified applications
  • Ideal solution – this harness is a reliable replacement for an original harness that is missing, failed or damaged due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.49001)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$102.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: Includes mounting hardware and necessary components required for certain applications to ensure worry-free installation
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

MSD Ignition – Ignition Coil (Part No.8227)

Ignition Coil

from

$71.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:
  • Direct performance replacement for Ford TFI coil
  • 85:1 turns ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Works w/Stock Ignition As Well As MSD Ignitions
  • CARB E.O. Approved
See More

Delphi – Ignition Coil (Part No.GN10183)

Ignition Coil

from

$52.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

Carquest Premium – Ignition Module (Part No.CBG1013)

Ignition Module

from

$202.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

Motorcraft – Original Equipment (O.E.) Module – Ignition (Part No.DY-1284)

Original Equipment (O.E.) Module - Ignition

from

$166.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:
  • Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
  • Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
  • As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
See More

Carquest Premium – Ignition Module (Part No.CBE1006)

Ignition Module

from

$46.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

1989 Ford Ranger Ignition and Tune-Up Products

You count on your 1989 Ford Ranger to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 111 Ignition and Tune-Up Products ranging in price from $2.79 to $240.34, you’re sure to find everything you need for your 1989 Ford Ranger.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 20 different brands like NGK, Autolite, and Motorcraft. 1989 Ford Ranger Ignition and Tune-Up Products start as low as $2.79!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 4,720 extensive product reviews on 1989 Ford Ranger Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are DiamondFIRE Automotive Spark Plug: More Power, Saves Gas with 4.0 stars and Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life with 4.8 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1989 Ford Ranger below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1989 Ford Ranger

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Ford Ranger running right for years to come. In our inventory you’ll find brands like NGK, Autolite, Motorcraft, and even more.

Popular Dorman – Help Ignition and Tune-Up Products

You’ll find popular Dorman – Help brand products across Spark Plugs. All are waiting to get your 1989 Ford Ranger back on the road. Some of the top-rated Dorman – Help products in these categories are:

Top-Rated Motorcraft Ignition and Tune-Up Products


If Motorcraft are what you’re looking for, our inventory holds plenty. We stock Motorcraft brand Ignition and Tune-Up Products for your 1989 Ford Ranger, and some of our most reviewed Motorcraft parts include:
Original Equipment (O.E.) Rotor Assembly
from $32.99
(6)
Original Equipment (O.E.) Rotor Assembly
Distributor Rotor Buttons

FAQs for 1989 Ford Ranger Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1989 Ford Ranger?

Out of 111 Ignition and Tune-Up Products for the 1989 Ford Ranger, the most popular in our inventory are:

What are the top-rated 1989 Ford Ranger Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1989 Ford Ranger based on customer reviews/ratings are:
PT16TT Platinum TT Spark Plug
from $5.99
(90)
PT16TT Platinum TT Spark Plug
“On line”