1983 Ford F-250 Pickup Ignition and Tune-Up Products

Essential 1983 Ford F-250 Pickup Ignition and Tune-Up Products

Carquest Premium – Diesel Glow Plug Relay (Part No.GPC1001)

Diesel Glow Plug Relay

from

$62.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8104)

Spark Plug Wire Set: Carbon Core, 9 Wire Set

from

$49.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Accel – 8.8Mm Spiral Universal Fit (Part No.8033)

8.8Mm Spiral Universal Fit

from

$153.99
These ACCEL 8.8mm wires feature a carbon/graphite core that virtually eliminate RFI noise while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • Custom-fit Universal And Import Coverage
  • Pre And Post HEI Vehicles
  • Magnetic Suppression
  • Fiberglass/Kevlar Core
  • 500 Ohms Resistance
See More

MSD Ignition – Ignition Coil (Part No.8227)

Ignition Coil

from

$71.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:
  • Direct performance replacement for Ford TFI coil
  • 85:1 turns ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Works w/Stock Ignition As Well As MSD Ignitions
  • CARB E.O. Approved
See More

MSD Ignition – Distributor Gear; Ford 351C; 460; Iron (Part No.85812)

Distributor Gear; Ford 351C; 460; Iron

from

$42.49
This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1041)

Distributor Vacuum Advance

from

$51.99
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Ignition Control Module Connector (Part No.PTA1196)

Ignition Control Module Connector

from

$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ignition Coil Connector (Part No.PTC1111)

Ignition Coil Connector

from

$7.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest – Distributor Rotor (Part No.23A1004)

Distributor Rotor

from

$9.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest Premium – Ignition Switch Connector (Part No.PTA1433)

Ignition Switch Connector

from

$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

PerTronix – D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black (Part No.D4000)

D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black

from

$41.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

Accel – 8Mm Super Stock Spiral Uni Rd (Part No.5040R)

8Mm Super Stock Spiral Uni Rd

from

$101.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

Motorcraft – Glow Plug Switch (Part No.F1110672536MTR)

Glow Plug Switch

from

$75.07
Glow Plug Switch

Carquest Premium – Distributor Reluctor (Part No.REA1001)

Distributor Reluctor

from

$7.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Motorcraft – SPARK PLUG (Part No.SP-420)

SPARK PLUG

from

$2.79
Motorcraft spark plugs are designed, engineered and recommended by Ford Motor Company.

Product Features:
  • Same part installed when the engine rolled off the assembly line
  • Designed to deliver quick starts, enhanced fuel economy and smooth acceleration
See More

Accel – 8Mm Super Stock Spiral Uni Bu (Part No.5040B)

8Mm Super Stock Spiral Uni Bu

from

$89.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

MSD Ignition – Distributor Gear; Ford 351C; 460; Bronze (Part No.8581)

Distributor Gear; Ford 351C; 460; Bronze

from

$83.29
MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5 percent nickel. This special combination creates high-strength gear teeth that are less prone to wear even with high volume oil pumps. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Interstitial carbide improves wear resistance/running properties
  • Melonite QPQ coated reduces friction and initial wear
  • Proprietary formulated ductile iron.
  • Micro Polished Surface For Smooth Contact
See More

Carquest Premium – Ignition Control Module (Part No.CBA1188)

Ignition Control Module

from

$46.99
Carquest premium engine management products provide the right ignition control module for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quality and performance standards using top-quality components, our sensors are the best choice for your maintenance and repair needs.

Product Features:
  • Thicker, more robust wire bonds for lasting reliability
  • Proprietary, application-specific integrated chips for proper performance
  • Fast-start circuitry for quick starts
  • Ultrasonically welded copper heat sinks to ensure heat transfer for long life
  • Laser trimming to precise specifications for OE function
See More

MSD Ignition – Crank Trigger Kit; Small Block Ford (Part No.8640)

Crank Trigger Kit; Small Block Ford

from

$593.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:
  • Absolutely The Most Accurate Way To Trigger The Ignition
  • The non-magnetic pickup cannot be false triggered.
  • Powerful magnets are embedded in a billet aluminum trigger wheel.
  • Incl. brackets/mounting hardware to fit a variety of engines
See More

ACDelco – Glow Plug (Part No.32G)

Glow Plug

from

$16.29
ACDelco Gold (Professional) Glow Plugs are a high quality alternative to Original Equipment (OE) parts. These Glow Plugs are specially designed to give diesel engines the heat they need for cold starts, and are the high quality replacement ideal for many vehicles on the road today. They maintain ignition in all cylinders, optimizing throttle response. These premium aftermarket replacement glow plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • Designed to give diesel engines the heat they need for cold starts
  • GN-type regulating coil
  • Self-regulating to control electrical flow from the battery as temperatures rise to avoid overheating
  • Full range of reaches – from 21 mm to 40 mm – to meet chamber requirements in a wide variety of applications
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

Carquest Premium – Ignition Switch (Part No.CSC1133)

Ignition Switch

from

$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

PerTronix – 9FO-182 Ignitor II Adaptive Dwell Control Ford Electronic Distributor 8 cyl (Part No.9FO-182)

9FO-182 Ignitor II Adaptive Dwell Control Ford Electronic Distributor 8 cyl

from

$206.99
The Ignitor II has many of the same great features that the Ignitor has, but its smarter. Ignitor II units sense the coil current level and use a powerful micro controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the en

Product Features:
  • PerTronix 9FO-182 Ignitor II Adaptive Dwell Control Ford Electronic Distributor 8 cyl
  • Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
See More

Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3755101)

Unilite Electronic Ignition Distributor Series 37

from

$538.99
Unilite Electronic Ignition Distributor Series 37

Dorman – 6 – Wire Ford Ignition Module (Gray) (Part No.85130)

6 - Wire Ford Ignition Module (Gray)

from

$23.99
This ignition harness is designed to match the fit and function of the original harness on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this ignition harness is designed to match the fit and function of the original harness on specified applications
  • Ideal solution – this harness is a reliable replacement for an original harness that is missing, failed or damaged due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence
See More

MSD Ignition – Distributor Gear; Ford 351W; Bronze (Part No.8585)

Distributor Gear; Ford 351W; Bronze

from

$83.39
MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5 percent nickel. This special combination creates high-strength gear teeth that are less prone to wear even with high volume oil pumps. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Interstitial carbide improves wear resistance/running properties
  • Melonite QPQ coated reduces friction and initial wear
  • Proprietary formulated ductile iron.
  • Micro Polished Surface For Smooth Contact
See More

Carquest – Distributor Ignition Pickup (Part No.ME12)

Distributor Ignition Pickup

from

$43.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • High temperature enameled wires were specified for better insulation and performance
  • With industry leading expertise in electronic ignition, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Dorman – Help – Spark Plug Non-Foulers – 14mm Tapered Seat (Part No.42006)

Spark Plug Non-Foulers - 14mm Tapered Seat

from

$6.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
  • Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
  • Durable construction – made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8163)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$36.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

1983 Ford F-250 Pickup Ignition and Tune-Up Products

You count on your 1983 Ford F-250 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 199 Ignition and Tune-Up Products ranging in price from $2.49 to $762.99, you’re sure to find everything you need for your 1983 Ford F-250 Pickup.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 18 different brands like ACDelco, Autolite, and Motorcraft. 1983 Ford F-250 Pickup Ignition and Tune-Up Products start as low as $2.49!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 2,689 extensive product reviews on 1983 Ford F-250 Pickup Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Wire Set; Black Super Conductor; Ford 302; 351W; HEI with 4.7 stars and Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration with 4.9 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1983 Ford F-250 Pickup below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1983 Ford F-250 Pickup

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1983 Ford F-250 Pickup running right for years to come. In our inventory you’ll find brands like ACDelco, Autolite, Motorcraft, and even more.

Popular Champion Ignition and Tune-Up Products

You’ll find popular Champion brand products across Spark Plugs. All are waiting to get your 1983 Ford F-250 Pickup back on the road. Some of the top-rated Champion products in these categories are:

FAQs for 1983 Ford F-250 Pickup Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1983 Ford F-250 Pickup?

Out of 199 Ignition and Tune-Up Products for the 1983 Ford F-250 Pickup, the most popular in our inventory are:
Spark Plug (ASF42CF4)
from $6.79
(28)
Spark Plug (ASF42CF4)
Spark Plugs

What are the top-rated 1983 Ford F-250 Pickup Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1983 Ford F-250 Pickup based on customer reviews/ratings are:
Wire Set; Black Super Conductor; Ford 302; 351W; HEI
from $147.99
(53)
Wire Set; Black Super Conductor; Ford 302; 351W; HEI
“Easy to change gasket ring and filter. Makes changing oil a whole lot easier”
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
from $3.49
(50)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
“Nice solid plugs…has worked great in my new rebuild..”
OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, UR4
from $4.99
(49)
OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, UR4
“302 Ford works good again”