1981 Ford Mustang Ignition and Tune-Up Products

Essential 1981 Ford Mustang Ignition and Tune-Up Products

Carquest Premium – Ignition Module (Part No.CBG1008)

Ignition Module

from

$58.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

Accel – 8.8Mm Spiral Universal Fit (Part No.8033)

8.8Mm Spiral Universal Fit

from

$153.99
These ACCEL 8.8mm wires feature a carbon/graphite core that virtually eliminate RFI noise while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • Custom-fit Universal And Import Coverage
  • Pre And Post HEI Vehicles
  • Magnetic Suppression
  • Fiberglass/Kevlar Core
  • 500 Ohms Resistance
See More

Carquest Premium – Distributor Ignition Pickup (Part No.MEA2275)

Distributor Ignition Pickup

from

$45.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7006)

Coil On Plug Insulator Boot: Spring included, Designed for direct fit

from

$8.49
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

Motorcraft – Motorcraft Ignition Wire Set (Part No.F1020672508MTR)

Motorcraft Ignition Wire Set

from

$72.11
The Motorcraft Ignition wire set is a direct fit OEM replacement that guarantees the same performance and quality provided by the vehicle manufacturer.

Product Features:
  • OEM quality
  • OEM connectors for easy Installation.
  • Resistant to high temperatures, corrosion and vibration.
  • Ignition noise suppressed.
  • Reduces the chance of misfire
  • Increases engine life
  • Protects against wire set failure
See More

Driveworks – Distributor Rotor (Part No.23067)

Distributor Rotor

from

$11.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest Premium – Ignition Switch (Part No.CSC1044)

Ignition Switch

from

$70.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1175)

Ignition Coil Connector

from

$45.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

MSD Ignition – Distributor Gear; Steel; Ford 351C; 460 (Part No.85813)

Distributor Gear; Steel; Ford 351C; 460

from

$143.99
A distributor’s performance is only as good as its drive gear. MSD ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance. Features micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

MSD Ignition – Distributor; Ford TFI; 351W (Part No.8453)

Distributor; Ford TFI; 351W

from

$593.99
When you start making serious power with your EFI Ford, the stock distributor shaft is one of the weak links of the engine. These Pro-Billet models answer the need for an affordable replacement in a strong and great looking package. Each distributor starts as a solid billet that is secured into a state of the art computer numerical control (CNC) machine where it is transformed into a precision housing. Inside each housing there is a sealed ball bearing at the top of the shaft. This design is responsible for accurately guiding the oversized polished steel shaft throughout the entire RPM range of your engine. The shaft is also quip-coated for friction reduction and corrosion resistance. The Pro-Billet distributors use a stock-style trigger pick-up to accept factory connectors. For installation, you simply remove the stock distributor and bolt the Pro-Billet MSD in place! Each model is supplied with a special gear to work with the?factory camshafts.

Product Features:
  • Drop in billet replacement for late model Ford TFI 5.8L dist.
  • Supplied w/steel gear to work w/factory roller camshafts
  • Factory style ignition module connector accepts factory wiring
  • CNC machined billet aluminum housing and billet aluminum base
  • QPQ coated polished steel shaft; guided by sealed ball bearings
  • Supplied w/Late Model Distributor Cap And Rotor
  • Legal to install in all 50 states
See More

Carquest Premium – Distributor Check Valve (Part No.ECA1176)

Distributor Check Valve

from

$11.99
CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:
  • Lifecycle tested to meet or exceed OE specifications
  • Direct OE replacement
  • High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
  • Global coverage for import and/or domestic applications.
See More

Dorman – Electrical Harness – 2-Wire Ignition Coil (Part No.85848)

Electrical Harness - 2-Wire Ignition Coil

from

$12.29
This ignition coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.49001)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$102.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: Includes mounting hardware and necessary components required for certain applications to ensure worry-free installation
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Carquest Premium – Distributor Cap (Part No.CAC1203)

Distributor Cap

from

$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Help – Spark Plug Non-Foulers – 14mm Tapered Seat (Part No.42006)

Spark Plug Non-Foulers - 14mm Tapered Seat

from

$6.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
  • Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
  • Durable construction – made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Spark Plug Non-Foulers – 18mm Tapered Seat (Part No.42002)

Spark Plug Non-Foulers - 18mm Tapered Seat

from

$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
  • Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
  • Durable construction – made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040)

Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set

from

$63.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450° F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
See More

Accel – 7Mm Super Stock Copper Uni (Part No.3008)

7Mm Super Stock Copper Uni

from

$53.09
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm Yellow Silicone Jacket
  • Street-driven Applications
  • Copper Core
  • Orange Spark Plug Boots
  • Pre HEI Vehicles
  • Universal Wire Set
See More

Carquest Premium – Distributor Reluctor (Part No.REA1001)

Distributor Reluctor

from

$7.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Control Module Connector (Part No.PTA1196)

Ignition Control Module Connector

from

$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ignition Control Module Connector (Part No.PTA1257)

Ignition Control Module Connector

from

$15.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit (Part No.35-6353)

Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit

from

$39.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7007)

Coil On Plug Insulator Boot: Spring included, Designed for direct fit

from

$8.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

PerTronix – 1281DV Ignitor Ford 8 cyl Dual Point with Vacuum Advance (Part No.1281DV)

1281DV Ignitor Ford 8 cyl Dual Point with Vacuum Advance

from

$124.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign

Product Features:
  • PerTronix 1281DV Ignitor Ford 8 cyl Dual Point with Vacuum Advance
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
See More

PerTronix – 1266 Ignitor Ford 6 cyl pre-1965 (Part No.1266)

1266 Ignitor Ford 6 cyl pre-1965

from

$124.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign

Product Features:
  • PerTronix 1266 Ignitor Ford 6 cyl pre-1965
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
See More

Autolite – High Thread Pro Spark Plug: OE Design Exclusively for Ford 3V Engines, Finewire (Part No.HT0)

High Thread Pro Spark Plug: OE Design Exclusively for Ford 3V Engines, Finewire

from

$12.99
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • High nickel alloy side electrode maintains precise gap
  • Full platinum tip assures virtually no gap erosion for long life
  • Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
See More

Motorcraft – Spark Plug: 30,000-Mile Interval & RFI Reduction (Part No.SP-419)

Spark Plug: 30,000-Mile Interval & RFI Reduction

from

$2.99
Motorcraft Spark Plug with 30,000-Mile Interval and RFI Reduction is designed, engineered, and recommended by Ford Motor Company. This spark plug is the same part installed when the engine rolled off the assembly line, ensuring OEM quality. It features a copper core electrode and a nickel chromium alloy side electrode for excellent heat dissipation and durability. The resistor reduces radio frequency interference (RFI) and electrode erosion, while the copper-glass seal bonds the insulator and terminal post center electrode together, ensuring full required voltage at the spark gap and a gas-tight seal. With a 30,000-mile service interval and a tapered seat type, this spark plug offers reliable performance and longevity.

Product Features:
  • Same part installed when the engine rolled off the assembly line
  • 30,000-mile service interval
  • Copper core electrode and nickel chromium alloy side electrode for excellent heat dissipation and durability.
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
  • Copper-glass seal bonds insulator and terminal post center electrode together to ensure full required voltage at spark gap and a gas-tight seal
  • OEM Quality Assurance: Designed, engineered, and recommended by Ford Motor Company, this spark plug is the same part installed when the engine rolled off the assembly line, ensuring original equipment manufacturer (OEM) quality.
See More

ACDelco – Conventional Nickel Tip Copper Core Spark Plug: Reliable Performance (Part No.R83TS)

Conventional Nickel Tip Copper Core Spark Plug: Reliable Performance

from

$3.79
ACDelco Gold (Professional) Conventional Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These Conventional Spark Plugs are designed for reliability and efficient performance, and are the high quality replacements for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • Black Onyx coating helps reduce corrosion
  • Copper core provides great heat transfer and helps maximize plug durability
  • Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
  • Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
  • Available for use in Marine applications
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
  • Nickel Alloy Electrode Tip: Designed with a nickel alloy center electrode tip, these spark plugs provide enhanced durability and consistent performance.
  • Outstanding Suppression Characteristics: These spark plugs offer excellent suppression characteristics, contributing to the overall reliability and efficiency of your vehicle’s engine.
See More

1981 Ford Mustang Ignition and Tune-Up Products

You count on your 1981 Ford Mustang to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 144 Ignition and Tune-Up Products ranging in price from $2.79 to $548.99, you’re sure to find everything you need for your 1981 Ford Mustang.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 16 different brands like NGK, Motorcraft, and ACDelco. 1981 Ford Mustang Ignition and Tune-Up Products start as low as $2.79!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 3,720 extensive product reviews on 1981 Ford Mustang Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are DiamondFIRE Automotive Spark Plug: More Power, Saves Gas with 4.1 stars and DiamondFIRE Automotive Spark Plug: More Power, Saves Gas with 4.0 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1981 Ford Mustang below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1981 Ford Mustang

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1981 Ford Mustang running right for years to come. In our inventory you’ll find brands like NGK, Motorcraft, ACDelco, and even more.

Popular Dorman – Help Ignition and Tune-Up Products

You’ll find popular Dorman – Help brand products across Spark Plugs. All are waiting to get your 1981 Ford Mustang back on the road. Some of the top-rated Dorman – Help products in these categories are:
Spark Plug Non-Foulers - 14mm Tapered Seat
from $6.99
(1)
Spark Plug Non-Foulers – 14mm Tapered Seat
Spark Plug Non-Foulers
Spark Plug Non-Foulers - 18mm Tapered Seat
from $9.99
(8)
Spark Plug Non-Foulers – 18mm Tapered Seat
Spark Plug Non-Foulers

Top-Rated Motorcraft Ignition and Tune-Up Products


If Motorcraft are what you’re looking for, our inventory holds plenty. We stock Motorcraft brand Ignition and Tune-Up Products for your 1981 Ford Mustang, and some of our most reviewed Motorcraft parts include:

FAQs for 1981 Ford Mustang Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1981 Ford Mustang?

Out of 144 Ignition and Tune-Up Products for the 1981 Ford Mustang, the most popular in our inventory are:

What are the top-rated 1981 Ford Mustang Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1981 Ford Mustang based on customer reviews/ratings are:
DiamondFIRE Automotive Spark Plug: More Power, Saves Gas
from $7.49
(184)
DiamondFIRE Automotive Spark Plug: More Power, Saves Gas
“I used these type before.”
PT16TT Platinum TT Spark Plug
from $5.99
(90)
PT16TT Platinum TT Spark Plug
“On line”