Suzuki Samurai Drivetrains
Top Suzuki Samurai Drivetrains Categories
We carry over 47 Drivetrains in inventory for the Suzuki Samurai. If you’re looking for aftermarket Drivetrains for your Suzuki Samurai, check out all these categories:
Essential Suzuki Samurai Drivetrains
Yukon Gear – Suzuki Samurai Pinion Seal (Part No.30034)
from
$36.99
Suzuki Samurai pinion seal.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion seal
- Fits Suzuki Samurai
National – Bearings (Part No.KC-11445-Y)
from
$62.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Ball Bearing (Part No.S-206-FF)
Driveworks – Oil Seal (Part No.S-224820)
from
$4.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Minor Install Kit For Suzuki Samurai Differential (Part No.12064)
from
$76.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Suzuki Samurai
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Milemarker – MileMarker Supreme; Manual Hub (Part No.436)
from
$167.99
Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.
Product Features:
See More
Product Features:
- Ultimate In Style And Service
- Latest Patented Technology
- Smooth Operation
- Limited Lifetime Warranty
USA Standard Gear – Spartan Locker for Suzuki Samurai Differential with 26 Spline Axles (Part No.17013)
from
$469.99
The Spartan locker by USA standard gear is a mechanical locker that fits inside a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. This unit does use the stock side gears.
Product Features:
See More
Product Features:
- Fits Suzuki Samurai
- Made from 9310 steel for added strength
- Works with stock side gears in standard carrier case
Yukon Gear – Suzuki Samurai Crush Sleeve (Part No.33126)
from
$23.99
Suzuki Samurai crush sleeve. Approx 1.240″ long.
Product Features:
See More
Product Features:
- Crush sleeve for Suzuki Samurai
- 1.240″ tall
Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)
from
$29.49
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
SKF – Wheel Bearing (Part No.K8000300614SKF)
from
$82.86
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.
Product Features:
See More
Product Features:
- Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
- 100% tested to the actual OE specifications per part number for fit, form and function
- High quality steel and surface finishes
- Proper implementation of heat treatment
NOK – Wheel Seal (Part No.K8010300616NOK)
from
$4.04
Wheel Seal
Yukon Gear – Bearing Race Driver (Part No.56005)
from
$126.99
Bearing race driver front Toyota 7.5″, 8″, Landcruiser, and the Suzuki Samurai. No return. (TOY30306).
Product Features:
See More
Product Features:
- Bearing race driver
- Fits 30306 race
- All steel construction
USA Standard Gear – Spartan Locker Spring & Pin Kit For Suzuki Samurai (Part No.17012)
from
$42.99
Spartan spring & pin kit, fits Suzuki Samurai ONLY.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Suzuki Samurai design
- Includes 4 springs and 4 alignment pins
Spicer – U Joint (Part No.K10102524312SPI)
from
$49.08
U Joint
Yukon Gear – Pinion Nut (Part No.33156)
from
$5.99
Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landrcuiser (fine spline pinion) & T100/Tacoma with factory locker. 30mm socket, M20 x 1.5 thread.
Product Features:
See More
Product Features:
- Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landcruiser with 30 spline pinion and Tacoma/T100 with factory locker
- 20mm x 1.5 thread
- 30mm socket
Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)
from
$39.99
8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.
Product Features:
See More
Product Features:
- Pinion depth shim kit for Toyota 7.5″, 8″ and V6
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
National – Multi Purpose Seal (Part No.5200)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Pinion Install Kit For Suzuki Samurai Differential (Part No.13080)
from
$309.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Suzuki Samurai
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Bearing Install Kit For Suzuki Samurai Differential (Part No.11079)
from
$349.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits Suzuki Samurai
- Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
USA Standard Gear – Samurai Spartan Locker Cross Pin Long (Part No.17028)
from
$46.99
Samurai Spartan locker cross pin long.
Product Features:
See More
Product Features:
- USA Standard Gear heavy-duty cross pin shaft
- Fits Suzuki Samurai
- Works with Spartan Locker or standard open spider gears
- Long shaft
National – Shaft Repair Sleeve (Part No.99147)
from
$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Driveworks – Tapered Roller Bearing (Part No.S-30306)
National – Bearings (Part No.30306)
from
$51.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
Suzuki Samurai Drivetrains Categories
Helping You Find the Right Drivetrains for Your Suzuki Samurai
You love your Samurai. So we’ve made it easier than ever to help you find Suzuki Samurai Drivetrains in our online catalog. Our inventory holds 47 aftermarket and OEM Drivetrains for your Suzuki Samurai, ranging from $4.04 to $883.99.
We offer parts from 15 brands trusted to make quality Drivetrains for your Suzuki Samurai. Before you buy, take some time to read through customer reviews. We currently have 6,992 reviews of Suzuki Samurai Drivetrains from previous customers. Some of the top rated parts include Multi Purpose Seal with 5.0 stars and Shaft Repair Sleeve with 4.0 stars.
Find your Samurai Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Suzuki Samurai part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your Suzuki Samurai
Our inventory holds Drivetrains for your Suzuki Samurai from 15 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Dorman, and Yukon Gear, all of which can keep that Suzuki happy.
We have MOOG Driveline Products parts available for your Suzuki Samurai in categories like Universal Joints. Some of the top-rated MOOG Driveline Products parts in these categories are:
Top-Rated Valvoline Drivetrains
Leading Valvoline Drivetrains
We carry Valvoline brand parts for your Suzuki Samurai across several catalog categories, including Differentials. Some of our most reviewed Valvoline parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for Suzuki Samurai Drivetrains
What are the most purchased Drivetrains for the Suzuki Samurai?
Out of 47 Drivetrains for the Suzuki Samurai, the most popular in our inventory are:
What are the top-rated Suzuki Samurai Drivetrains?
Top-rated Drivetrains for your Suzuki Samurai based on customer reviews/ratings are:
from
$41.49
(2)
Shaft Repair Sleeve
“Used this to repair a camshaft sealing surface on a 2000 Sienna. it worked incredibly well and was easy to use. My first time using a repair sleeve ”
