1993 Suzuki Samurai Drivetrains

Essential 1993 Suzuki Samurai Drivetrains

MOOG Driveline Products – Non-Greaseable Premium Universal Joint (Part No.398)

Non-Greaseable Premium Universal Joint

from

$46.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates?
  • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Bearing cups ground and slightly oversized to fit in a used drive shaft
  • Cross forging shape and flash provide easier installation and high strength
See More

National – Bearings (Part No.30307)

Bearings

from

$50.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Rugged Ridge – Locking Hub (Part No.15001.38)

Locking Hub

from

$268.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r

Product Features:
  • Impact Resistant Nodular Iron
  • Corrosion Resistant
  • Better 4WD Performance
  • Better Fuel Economy
  • Easy Install
See More

Driveworks – Tapered Roller Bearing (Part No.S-30306)

Tapered Roller Bearing

from

$14.29
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Bearing Install Kit For Suzuki Samurai Differential (Part No.11079)

Bearing Install Kit For Suzuki Samurai Differential

from

$349.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits Suzuki Samurai
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

National – Bearings (Part No.KC-11445-Y)

Bearings

from

$62.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)

Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter

from

$29.49
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

USA Standard Gear – Spartan Locker Spring & Pin Kit For Suzuki Samurai (Part No.17012)

Spartan Locker Spring & Pin Kit For Suzuki Samurai

from

$42.99
Spartan spring & pin kit, fits Suzuki Samurai ONLY.

Product Features:
  • Replacement spring and pin kit for Spartan Locker
  • Fits Suzuki Samurai design
  • Includes 4 springs and 4 alignment pins
See More

Driveworks – Ball Bearing (Part No.S-206-FF)

Ball Bearing

from

$5.79
Product Features:
  • Brand may vary by location
See More

National – Multi Purpose Seal (Part No.350572)

Multi Purpose Seal

from

$14.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

NOK – Wheel Seal (Part No.K8010300616NOK)

Wheel Seal

from

$4.04
Wheel Seal

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – Bearing Race Driver (Part No.56005)

Bearing Race Driver

from

$126.99
Bearing race driver front Toyota 7.5″, 8″, Landcruiser, and the Suzuki Samurai. No return. (TOY30306).

Product Features:
  • Bearing race driver
  • Fits 30306 race
  • All steel construction
See More

National – Shaft Repair Sleeve (Part No.99147)

Shaft Repair Sleeve

from

$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Multi Purpose Seal (Part No.224820)

Multi Purpose Seal

from

$7.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

USA Standard Gear – Samurai Spartan Locker Cross Pin Long (Part No.17028)

Samurai Spartan Locker Cross Pin Long

from

$46.99
Samurai Spartan locker cross pin long.

Product Features:
  • USA Standard Gear heavy-duty cross pin shaft
  • Fits Suzuki Samurai
  • Works with Spartan Locker or standard open spider gears
  • Long shaft
See More

Yukon Gear – Pinion Install Kit For Suzuki Samurai Differential (Part No.13080)

Pinion Install Kit For Suzuki Samurai Differential

from

$309.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Suzuki Samurai
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

SKF – Wheel Bearing (Part No.K8000300614SKF)

Wheel Bearing

from

$82.86
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

Product Features:
  • Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
  • 100% tested to the actual OE specifications per part number for fit, form and function
  • High quality steel and surface finishes
  • Proper implementation of heat treatment
See More

Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

3 Qt - Penzoil 80W90 Conventional Gear Oil

from

$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:
  • Includes three quarts of conventional oil
See More

USA Standard Gear – Pinion Installation Kit For Suzuki Samurai (Part No.60019)

Pinion Installation Kit For Suzuki Samurai

from

$213.99
Product Features:
  • Fits Suzuki Samurai
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Pinion Nut (Part No.33156)

Pinion Nut

from

$5.99
Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landrcuiser (fine spline pinion) & T100/Tacoma with factory locker. 30mm socket, M20 x 1.5 thread.

Product Features:
  • Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landcruiser with 30 spline pinion and Tacoma/T100 with factory locker
  • 20mm x 1.5 thread
  • 30mm socket
See More

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

from

$39.99
8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:
  • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1109)

Differential Pinion Shim Kit

from

$13.49


Product Features:
  • KIT SHIM TOYO TRK 79-92 REAR/89-92 FRONT
See More

USA Standard Gear – Spartan Locker for Suzuki Samurai Differential with 26 Spline Axles (Part No.17013)

Spartan Locker for Suzuki Samurai Differential with 26 Spline Axles

from

$469.99
The Spartan locker by USA standard gear is a mechanical locker that fits inside a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. This unit does use the stock side gears.

Product Features:
  • Fits Suzuki Samurai
  • Made from 9310 steel for added strength
  • Works with stock side gears in standard carrier case
See More

Yukon Gear – Mini Spool For Suzuki Samurai (Part No.32234)

Mini Spool For Suzuki Samurai

from

$188.99
Mini Spool for ’86 to ’95 Suzuki Samurai and ’89 to ’00 sidekick (rear only) with 26 axles. Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Suzuki Samurai
  • Installs into a standard open carrier case
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Suzuki Samurai Crush Sleeve (Part No.33126)

Suzuki Samurai Crush Sleeve

from

$23.99
Suzuki Samurai crush sleeve. Approx 1.240″ long.

Product Features:
  • Crush sleeve for Suzuki Samurai
  • 1.240″ tall
See More

1993 Suzuki Samurai Drivetrains

You count on your 1993 Suzuki Samurai to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 44 Drivetrains ranging in price from $4.04 to $883.99, you’re sure to find everything you need for your 1993 Suzuki Samurai.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 14 different brands like Valvoline, Dorman, and Yukon Gear. 1993 Suzuki Samurai Drivetrains start as low as $4.04!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 997 extensive product reviews on 1993 Suzuki Samurai Drivetrains. Some of the top-rated Drivetrains products we carry are Shaft Repair Sleeve with 4.0 stars and Oil Seal with 5.0 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1993 Suzuki Samurai below to get started!

Top-Rated Drivetrains Brands For Your 1993 Suzuki Samurai

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1993 Suzuki Samurai running right for years to come. In our inventory you’ll find brands like Valvoline, Dorman, Yukon Gear, and even more.

Popular MOOG Driveline Products Drivetrains

You’ll find popular MOOG Driveline Products brand products across Universal Joints. All are waiting to get your 1993 Suzuki Samurai back on the road. Some of the top-rated MOOG Driveline Products products in these categories are:
Non-Greaseable Premium Universal Joint
from $46.99
(1)
Non-Greaseable Premium Universal Joint
U-Joints

FAQs for 1993 Suzuki Samurai Drivetrains

What are the most purchased Drivetrains for the 1993 Suzuki Samurai?

Out of 44 Drivetrains for the 1993 Suzuki Samurai, the most popular in our inventory are:
Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter
from $29.49
(36)
Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter
CV Quick Boot Kits
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil
Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter
from $35.99
(11)
Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter
CV Quick Boot Kits

What are the top-rated 1993 Suzuki Samurai Drivetrains?

Top-rated Drivetrains for your 1993 Suzuki Samurai based on customer reviews/ratings are:
Shaft Repair Sleeve
from $41.49
(2)
Shaft Repair Sleeve
“Used this to repair a camshaft sealing surface on a 2000 Sienna. it worked incredibly well and was easy to use. My first time using a repair sleeve ”
Oil Seal
from $4.99
(1)
Oil Seal
“Worked great in my ’72 MGB”
Tapered Roller Bearing
from $14.29
(1)
Tapered Roller Bearing
“Replaced original OEM shocks and the ride is better than when my 2007 Hyundai Entourage was brand new.”