Name: Action Plus Water Pumps
Brand: Weiand
SKU: 9208P
Price: 255.99 USD
Rating: 1.5 (2 reviews)

Essential Oldsmobile Cutlass Supreme Performance Engines

from

$255.99

Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Product Features:

Twisted Snout Water Pump Design For Updated Style
Street Performance
Heavy Duty Shaft w/5/8 in. Pilot
Six-Blade Stamped Steel
Anti-Cavitation Impeller
100 Percent Leak Tested

from

$302.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$49.99

Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Die-cut for an excellent fit
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use

from

$32.49

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$10.99

10 Degree Superlock Steel Retainer for 1.250" OD Valve Spring

from

$12.99

Spectre’s Chevrolet V8 water neck fits 1966 – 1995 Chevy V8 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes bolts.

Product Features:

Fits 1966 – 1995 Chevy V8 engines
Includes bolts
Chrome plated
Designed for OEM fit
Easy to install
O-ring/gasket not included

from

$350.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$144.99

Includes: 2 short chrome valve covers 2 valve cover gaskets 1 chrome push-on breather 1 chrome dipstick & tube 1 chrome timing chain cover 1 chrome timing tab 1 rubber grommet for valve cover PCV hole 1 breather grommet.

Product Features:

Chrome Plated Steel
Comes W/valve Cover Gaskets

from

$27.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$1059.99

Product Features:

50-State Street Legal Aluminum Cylinder Head
Out-of-the-Box Bolt-On Performance
64cc Combustion Chambers Improve Performance
Retain Stock Compression Ratio

from

$42.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$17.79

Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch

Product Features:

Precision Machined
Case Hardened
Give Accurate Alignment
2 Per Set

from

$223.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:

Work with .530″ guides and 11/32″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$44.99

Product Features:

Replacement Gasket Set For PN[4242]

from

$15.99

Roller cam lobes are ground flat rather than tapered like a flat tappet cam; it is necessary to provide some means of holding the cam back to the rear of the engine. The thrust button rides between the front of the timing gear and the back of the front cover and can be shimmed for proper end play of the cam. COMP Cams has both the solid nylon button and the roller thrust bearing available for the ultimate in performance.

Product Features:

.810″ Length
Ride between the front of the timing gear and the back of the timing cover
Can be shimmed to achieve proper endplay
Solid nylon and roller thrust bearing styles available

from

$83.99

COMP Cams Hi-Tech Roller Race Timing Sets include cast iron camshafts gears, induction hardened billet steel crank sprockets, and pre-stretched, heat-treated double roller chains with heavy-duty large pin design. They feature 3 keyway crank sprockets for

Product Features:

Cast iron camshaft gear and induction hardened billet steel crank sprocket
Pre-stretched, heat-treated true double roller chain with heavy-duty large pin design; chain available separately
Ideal for all street performance and race applications
Features 3 keyway crank sprocket for 4-degree incremental adjustability, 4-degree maximum advance/retard
Dynamically balanced and quality checked for run-out tolerances

from

$562.99

Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer
Washer Between Turbine and Cover

from

$159.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

Complete Kit: Includes Retainers And Locks
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Includes Superior Quality Steel Retainers
Includes 7 deg. Heat-Treated Valve Stem Locks
Retainers and Locks Black Oxide Coated
Non-Rotator Style: Dyno Tested and Street Proven
Great Match to Edelbrock Camshaft Kit

from

$13.99

High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6.

from

$32.49

Secure the harmonic balancer or dampener on your Chevy. Works on original equipment, high performance street, drag or circle track applications. Features a heat treated black oxide coated Grade 8 alloy steel bolt for strength with a tall hex head to prevent wrench from slipping. An extra thick parallel ground washer provides accurate, uniform torque, and a lock washer is also included.

Product Features:

Heat treated black oxide coated Grade 8 alloy steel
Tall hex head bolt to prevent wrench from slipping
Extra thick parallel ground washer provides accurate, uniform torque
Washers Provides More Accurate And Uniform Torque
Grade 8 Alloy Steel

from

$35.49

Edge molded rubber water outlet gasket is reusable, great for engines that require regular disassembling for maintenance. Incorporates solid aluminum carrier for strength and rigidity. Can be used with OE replacement or aftermarket chrome water outlets. Requires no gasket sealer.

Product Features:

Edge Molded Rubber Water Outlet Gasket Is Reusable
Requires No Gasket Sealer
Solid Aluminum Carrier For Strength/rigidity
Reusable – Ideal for Engines That Are Frequently Taken Apart & Reassembled

from

$18.99

Replacement gasket for top to bottom. See PN(7110) complete. PN(7067) bottom. PN(7032) top. Includes base and top for intake manifold PN(7110).

Product Features:

Replacement Gasket for Top to Bottom
See PN[7110]Complete; PN[7067]Bottom; PN[7032] Top

from

$51.99

This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.

Product Features:

Repairs That Leaky Rear Main Sail
Silicone Rubber to Withstand Extreme Engine Oil Temperatures
Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
Injection Molded for Precise Fit

from

$77.99

Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Grade 8 Steel

from

$75.99

These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.

Product Features:

They Are Zinc Dichromate Plated Steel
They Have Black Oxide Coated Set Screws
Keeps Rocker Arms Positively Locked
(16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
Includes Locks and Hex Wrench
Shank O.D. .603″

Performance Engines Brands You Can Trust For Your Oldsmobile Cutlass Supreme

8 trusted brands of Performance Engines line our shelves, ready to help keep your Oldsmobile Cutlass Supreme running smooth. Below are some of the most popular brands and their top Performance Engines offerings:

Popular FEL-PRO Performance Performance Engines

FEL-PRO Performance products for the Oldsmobile Cutlass Supreme span several categories. Some of the highest-rated FEL-PRO Performance Performance Engines that will fit your Oldsmobile Cutlass Supreme are:

from $44.99

(1)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

Performance Engine Cylinder Head Gaskets

from $42.49

(1)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

Performance Engine Cylinder Head Gaskets

from $31.99

(1)

Engine Valve Cover Gasket Set

Performance Engine Valve Cover Gasket Sets

Top Oldsmobile Cutlass Supreme Performance Engines from Mr. Gasket

Your Oldsmobile Cutlass Supreme will be purring again thanks to Mr. Gasket brand Performance Engines available for online order or in-store pick up. Popular Mr. Gasket parts include:

from $18.29

(12)

Intake Manifold Bolts

Performance Intake Manifolds

from $9.99

(9)

Water Outlet Gasket

Performance Water Outlet Gaskets

from $35.49

(6)

Premium Quality Thermostat Gasket with Solid Aluminum Carrier

Performance Water Outlet Gaskets

Most Purchased Oldsmobile Cutlass Supreme Performance Engines from Edelbrock

When you buy the most frequently purchased Edelbrock brand Performance Engines, you can be confident it will be the right part for your Oldsmobile Cutlass Supreme. Here are the Edelbrock Performance Engines Advanced Auto customers buy the most:

from $195.99

(7)

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy

Performance Intake Manifolds

from $42.49

(1)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

Performance Engine Cylinder Head Gaskets

from $374.99

This product is not rated

Performer RPM Small Block Chevy AIR-Gap Intake Manifold

Performance Intake Manifolds

Oldsmobile Cutlass Supreme Performance Engines

Your One-Stop Shop For Trusted Oldsmobile Cutlass Supreme Performance Engines

Essential Oldsmobile Cutlass Supreme Performance Engines

Weiand – Action Plus Water Pumps (Part No.9208P)

Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2102)

Mr. Gasket – Intake Gasket (Part No.143)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Competition Cams – 10 Degree Superlock Steel Retainer for 1.250" OD Valve Spring (Part No.750-1)

Spectre – Water Neck Chev Late w/Hdr (Part No.42313)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.42-222-4)

Mr. Gasket – Chrome Dress-Up Kit (Part No.9834)

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1818)

Edelbrock – Performer Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet (Part No.60909)

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4375)

Competition Cams – VALVE SEALS, 11/32" TEFLON 1 ST (Part No.503-16)

Edelbrock – Replacement Timing Cover Gasket #4243 For SB Chevy, Fits 2-Piece Part #4242 (Part No.4243)

Competition Cams – CAM BUTTON, FIBER TYPE SBC 1 EA (Part No.202)

Competition Cams – TIMING SET, HIGH TECH SMALL BLOCK CHEVY 1 EA (Part No.3100)

B & M – Tork Master 3000 (Part No.20402)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

Competition Cams – High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6. (Part No.812-1)

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7845)

Mr. Gasket – Premium Quality Thermostat Gasket with Solid Aluminum Carrier (Part No.738G)

Edelbrock – Intake Manifold replacement base to top gasket (Part No.6999)

Mr. Gasket – Rear Main Seal Gasket (Part No.1965)

Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)