1969 Oldsmobile Cutlass Supreme Performance Engines

Essential 1969 Oldsmobile Cutlass Supreme Performance Engines

Weiand – Supercharger Remote Thermostat Housing (Part No.7134P)

Supercharger Remote Thermostat Housing

from

$184.99


Product Features:
  • Remote Thermostat Housing
See More

Spectre – Water Neck; Olds (Part No.4733)

Water Neck; Olds

from

$26.99
Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.

Product Features:
  • Fits Oldsmobile 330, 350, 425 and 455 engines
  • Chrome plated
  • Bolts included
  • Designed for OEM fit
  • Easy to install
  • O-ring/gasket not included
See More

Competition Cams – CAMSHAFT, SBC 268 HIGH ENERGY HYDRAULIC 1 EA (Part No.12-210-2)

CAMSHAFT, SBC 268 HIGH ENERGY HYDRAULIC 1 EA

from

$537.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

Product Features:
  • Good blend of efficiency and performance.
  • Perfect choice for performance street rebuilds.
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Competition Cams – High Energy/Marine 212/212 Hydraulic Flat Cam for Chevrolet Small Block (Part No.12-206-2)

High Energy/Marine 212/212 Hydraulic Flat Cam for Chevrolet Small Block

from

$284.99
HYDRAULIC – High Energy: Vans, pickups, 4WD and towing, in 350c.i., good idle, strong mid-range torque. OR High Energy Marine: Single or dual engine with inboard/outboard drive for ski and economy.

Product Features:
  • HYDRAULIC – High Energy: Vans, pickups, 4WD and towing, in 350c.i., good idle, strong mid-range torque. OR High Energy Marine: Single or dual engine with inboard/outboard drive for ski and economy.
  • 260/260 Advertised Duration, 212/212 Duration @ .050″, .440″/.440″ Lift, 110 Lobe Separation
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Competition Cams – CAMSHAFT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA (Part No.12-205-2)

CAMSHAFT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA

from

$518.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

Product Features:
  • Good blend of efficiency and performance.
  • Perfect choice for performance street rebuilds.
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Competition Cams – CAMSHAFT, SBC 249 XTREME ENERGY COMPUTER CONTROLLED HYDRAULIC 1 EA (Part No.12-249-4)

CAMSHAFT, SBC 249 XTREME ENERGY COMPUTER CONTROLLED HYDRAULIC 1 EA

from

$276.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts, the Xtreme Energy grind family offers gains in torque and horsepower while still delivering adequate vacuum for power brakes and other vacuum dependent accessories. Xtreme Energy camshafts work great in carbureted applications, but offer the best performance with aftermarket intake manifolds, lower gear ratios, headers and free flowing exhaust.

Product Features:
  • HYDRAULIC – Xtreme Energy Computer Controlled: Great in throttle body, crossfire or carbureted engine and 305 TPI.
  • 249/260 Advertised Duration, 206/212 Duration @ .050″, .434″/.444″ Lift, 112 Lobe Separation
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam for Oldsmobile 260-455 (Part No.42-223-4)

Xtreme Energy 224/230 Hydraulic Flat Cam for Oldsmobile 260-455

from

$337.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Competition Cams – THUMPR CAMSHAFT, SBC 1 EA (Part No.12-600-4)

THUMPR CAMSHAFT, SBC 1 EA

from

$587.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i

Product Features:
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
  • Best with aftermarket converters and more rear gear.
  • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
See More

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam for Oldsmobile 260-455 (Part No.42-222-4)

Xtreme Energy 218/224 Hydraulic Flat Cam for Oldsmobile 260-455

from

$548.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Competition Cams – Thumpr 226/241 Hydraulic Flat Cam for Oldsmobile 260-455 (Part No.42-600-5)

Thumpr 226/241 Hydraulic Flat Cam for Oldsmobile 260-455

from

$324.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i

Product Features:
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
  • Best with aftermarket converters and more rear gear.
  • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
See More

Edelbrock – Victor Jr. 23 Degree Tall Intake Manifold Small-Block Chevy (Part No.2999)

Victor Jr. 23 Degree Tall Intake Manifold Small-Block Chevy

from

$463.99
Edelbrock part #2999 Victor Jr. 23 degree Tall intake manifold provides maximum performance for engines with standard port location, iron and aluminum cylinder heads. This versatile manifold is excellent for many applications from high-performance’s stree

Product Features:
  • Race Winning Design for all Types of Competition
  • Single Plane Maximizes Torque and Horsepower
  • For Performance in 3500 to 7500 RPM Range
  • Exit Ports Closely Match Unported GM Bowtie Heads
  • Ports Match GM PN[14011058/14011034/10134392]
  • Best for Classes Restricting Porting of Intakes
  • Features 1 in. Taller Carb Pad than PN[2972]
See More

Weiand – Action +Plus; Intake Manifold (Part No.8120P)

Action +Plus; Intake Manifold

from

$349.99
New Everbright(TM) Manifold coating now available on the most popular Weiand and Holley intakes uses proprietary vacuum metalizing technology combined with a protective clear powdercoat to provide long lasting, virtually maintenance free polished looks.

Product Features:
  • Low Rise/Dual Plane Design For Maximum Torque
  • Permanent Mold Casting Process
  • Lighter/Smoother/Better Looking/Consistent Casting
  • Dyno Proven To Make 25hp Over Competition
  • Fully CNC Machined For A Perfect Fit
  • Square Bore Carburetor Flange
  • Exhaust Crossover For Improved Street Drivability
See More

Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (Part No.2701)

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy

from

$195.99


Product Features:
  • Maximizes Performance with Edelbrock Carburetors
  • Runners Tuned to Match Square Bore Carburetor
  • Maximizes Peak Torque Around 3500 RPM
  • Excellent Throttle Response and Mid-Range Power
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
See More

Edelbrock – Super Victor 4500 for Raised Port 23 Degree Intake Manifold Small-Block Chevy (Part No.2971)

Super Victor 4500 for Raised Port 23 Degree Intake Manifold Small-Block Chevy

from

$494.99
Product Features:
  • 3500-8000 RPM Range
  • Single Plane Type-4500 Style Flange
  • 6.77 in. Front Height, 6.77 in. Center Height, 6.77 in. Rear Height
  • Satin Finish
  • For Raised Port 23 Degree Heads
See More

Mr. Gasket – Intake Bolt Kit (Part No.5003)

Intake Bolt Kit

from

$75.99
Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.

Product Features:
  • Chrome plated
  • Grade 8
  • 12-point head
  • AN washers with no exposed shoulder for a professional appearance
See More

Edelbrock – Performer RPM AIR-Gap Small Block Chevy Dual-Quad Intake Manifold (Part No.7525)

Performer RPM AIR-Gap Small Block Chevy Dual-Quad Intake Manifold

from

$484.99
Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.

Product Features:
  • Based on C26 Low Profile with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • 1.625 in. Taller Than Low-Profile PN[5425]
  • Also Available In EnduraShine Finish PN[75254]
  • Also Available As Complete Kit PN[2025/20254]
  • Best When Matched with Edelbrock 500cfm Carburetor
  • Use Fuel Line Kit PN[8088/8091]
  • Use Progressive Throttle Linkage Kit PN[7094]
See More

Mr. Gasket – Intake Manifold Bolts (Part No.957G)

Intake Manifold Bolts

from

$25.99
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes sixteen (16) 3/8 inch-16 x 1-1/4 inch bolts & washers

Product Features:
  • Zinc plated Grade 5 steel
  • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
  • Ideal For Minimal Space
  • 12-Point Head And Flange
  • Zinc Plated For Protection
See More

Edelbrock – Performer Small Block Oldsmobile 350 Intake Manifold (Part No.7111)

Performer Small Block Oldsmobile 350 Intake Manifold

from

$458.99


Product Features:
  • Best for the Ultimate in Street High-Performance
  • Designed Idle to 5500 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake w/180 deg Firing Order
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
  • Edelbrock Total Power Package Maximizes Gains
See More

Edelbrock – C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern (Part No.5419)

C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern

from

$473.99
Product Features:
  • Designed for Idle to 5500 RPM
  • Manifold has a Balanced 180+ Firing Order
  • Contains Exhaust Gas Heat Riser
  • Offers Excellent Performance Potential
  • Front Oil Filler Tube Boss Included
  • Carburetor Center-to-Center Dimensions = 5-1/2 in
  • Also Available Polished PN[5419] But Not Fit HEI
  • Use Rochester 2GC (small 1-7/16 in bore)
See More

Edelbrock – Performer Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.21011)

Performer Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish

from

$566.99
Edelbrock part #21011 Performer intake manifold is designed for street 1955-86 small-block Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle respons
See More

Edelbrock – Victor Ram 23-Degree Intake Manifold Base for Small-Block Chevy (Part No.7070)

Victor Ram 23-Degree Intake Manifold Base for Small-Block Chevy

from

$576.99
Product Features:
  • 6500-10000 RPM Range
  • Dual Plane Quad Type – 4150 Style Flange
  • 7.13 in. Front Height, 7.13 in. Center Height, 7.13 in. Rear Height
  • Satin Finish
  • Base Only
See More

Edelbrock – Performer Small-Block Chevy Intake Manifold for Street Performance (Part No.3701)

Performer Small-Block Chevy Intake Manifold for Street Performance

from

$339.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Accepts Late-Model Choke; Waterneck; and HEI
  • Accepts A/C And Alternator
  • Accepts Exhaust Heated Chokes and Accepts EGR
See More

Edelbrock – C-26 Small Block Chevy Dual-Quad Intake Manifold (Part No.5425)

C-26 Small Block Chevy Dual-Quad Intake Manifold

from

$504.99
Product Features:
  • Designed for 1500 to 5500 RPM Performance
  • Low Profile for Hood Clearance on Most Vehicles
  • Air-Conditioning/Front Oil Tube Bosses Included
  • Stock Alternator Brackets Do Not Fit
  • Use Edelbrock Fuel Line Kit PN[8088] w/Our Carbs
  • Carburetor Center-to-Center Dimensions = 6-7/16 in
  • Use Edelbrock Linkage Kit PN[7094] w/Our Carbs
  • Best Matched with Edelbrock 500 cfm Carburetors
See More

Edelbrock – Victor Jr. 23 Degree Intake Manifold Small-Block Chevy (Part No.2975)

Victor Jr. 23 Degree Intake Manifold Small-Block Chevy

from

$404.99
Race winning design for all types of competition. Single plane maximizes torque and horsepower. Runners feature extra material for custom porting. For performance in 3500 to 7500 RPM range. Low profile design helps minimal hood clearance. Can use 1 or 2 inch spacers to tune performance. Use PN(2999) where 1 inch spacers are not allowed. Best for standard port heads.

Product Features:
  • Race Winning Design for all Types of Competition
  • Single Plane Maximizes Torque and Horsepower
  • Runners Feature Extra Material for Custom Porting
  • For Performance in 3500 to 7500 RPM Range
  • Low Profile Design Helps Minimal Hood Clearance
  • Can Use 1 Or 2 in. Spacers To Tune Performance
  • Use PN[2999] Where 1 in. Spacers Not Allowed
  • Best for Standard Port Heads
See More

Edelbrock – RPM Air-Gap Oldsmobile 455 Intake Manifold (Part No.7551)

RPM Air-Gap Oldsmobile 455 Intake Manifold

from

$613.99
Edelbrock part #7551 Performer RPM Air-Gap Oldsmobile 455 intake manifold is intended for aggressive street/ strip big-block Oldsmobile applications. Designed to optimize horsepower production from 1500 to 6500 rpm, this manifold will perform best with en

Product Features:
  • 1500-6500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 5.04 in. Front Height, 5.54 in. Center Height, 6.04 in. Rear Height
  • Satin Finish
  • Non-EGR
See More

Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

Super Intake Manifold Bolts

from

$27.49
These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

Product Features:
  • Assures Accurate Torque App
  • Prevents Galling Manifold
  • Grade 5 Material
  • Black Oxide Coasted
See More

Weiand – X-CELerator; Intake Manifold (Part No.7547-1)

X-CELerator; Intake Manifold

from

$259.99


Product Features:
  • 2000-6500 RPM Power Band
  • Single Plane/Open Plenum Design
  • No Provision For Divorced Or Hot Air Choke
  • Square Flange Carburetor Mounting
See More

Edelbrock – Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish (Part No.2104)

Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish

from

$329.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Accepts Late-Model Choke; Waterneck; and HEI
  • Accepts A/C And Alternator
  • Accepts Exhaust Heated Chokes
See More

1969 Oldsmobile Cutlass Supreme Performance Engines

Maybe you’re in the middle of a full rebuild of that 1969 Oldsmobile Cutlass Supreme. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 6 different Performance Engines in our inventory ranging from $26.99 to $548.99. That means you can find the exact parts or products you need to keep that 1969 Oldsmobile Cutlass Supreme running smoothly.

Performance Engines are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1969 Oldsmobile Cutlass Supreme. Spectre, Edelbrock, and Competition Cams are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1969 Oldsmobile Cutlass Supreme, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Performance Engines to keep your 1969 Oldsmobile Cutlass Supreme rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1969 Oldsmobile Cutlass Supreme Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1969 Oldsmobile Cutlass Supreme demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Cutlass Supreme the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular Edelbrock Performance Engines

We carry Edelbrock parts in our stock across Performance Intake Manifolds categories, plus more. For a 1969 Oldsmobile Cutlass Supreme, our most popular Edelbrock Performance Engines include:
Performer Small-Block Oldsmobile 350 EGR Intake Manifold
from $463.99
(2)
Performer Small-Block Oldsmobile 350 EGR Intake Manifold
Performance Intake Manifolds

FAQs for 1969 Oldsmobile Cutlass Supreme Performance Engines

What are the most purchased Performance Engines for the 1969 Oldsmobile Cutlass Supreme?

Out of 6 Performance Engines for the 1969 Oldsmobile Cutlass Supreme, the most popular in our inventory are:
Water Neck; Olds
from $26.99
This product is not rated
Water Neck; Olds
Performance Water Outlets
Performer Small Block Oldsmobile 350 Intake Manifold
from $458.99
This product is not rated
Performer Small Block Oldsmobile 350 Intake Manifold
Performance Intake Manifolds
Xtreme Energy 218/224 Hydraulic Flat Cam for Oldsmobile 260-455
from $548.99
This product is not rated
Xtreme Energy 218/224 Hydraulic Flat Cam for Oldsmobile 260-455
Performance Engine Camshafts