Find Serpentine Belts in Port Saint Lucie, FL Near You

When it comes to maintaining your vehicle, the serpentine belt is a crucial component that often needs repair or replacement. These belts are responsible for powering multiple peripheral devices in your car, truck, or van, such as the alternator, power steering pump, water pump, and air conditioning compressor. Over time, serpentine belts can wear down due to heat, friction, and general wear, leading to potential engine performance issues. When purchasing a serpentine belt, consider the specific part requirements for your vehicle’s make and model, including the belt’s length and width, as well as the quality of materials used in its construction.

In addition to replacing the serpentine belt itself, it’s wise to inspect associated parts that may also require attention, such as tensioners and idler pulleys, which help maintain the belt’s proper tension and alignment. If you’re in Port Saint Lucie, you’re in luck! Two conveniently located Advance Auto Parts stores can assist you with these needs. You can visit the store at 10070 S US Highway 1, Port Saint Lucie, FL 34952, and reach them at (772) 337-7981, or stop by the other location at 353 E Prima Vista Blvd, Port Saint Lucie, FL 34983, with a phone number of (772) 878-3665. These stores are easily accessible from nearby neighborhoods and highways, so finding the right parts is a breeze.

In addition to a wide selection of serpentine belts and related components, Advance Auto Parts offers a variety of in-store services to help you keep your vehicle running smoothly. Services include battery installation, engine (OBD-II) code scanning, and wiper blade installation, among others. The knowledgeable staff can guide you through selecting the right parts and even assist you with installations to ensure you’re back on the road safely and quickly. Whether you’re a DIY enthusiast or need professional help, our Port Saint Lucie stores are here to support your automotive needs!

Compare Top Selling Serpentine Belts and check availability at your local Port Saint Lucie store

Dayco – Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count (Part No.5060930)

Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count

from

$60.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count (Part No.930K6)

Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count

from

$40.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 45.08 Long, 6 Rib Count (Part No.5060450)

Poly Rib Belt Serpentine Belt; 45.08 Long, 6 Rib Count

from

$28.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count (Part No.378K4)

Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count

from

$25.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Driveworks – Poly Rib Belt Serpentine Belt; 90.55 Long, 6 Rib Count (Part No.905K6)

Poly Rib Belt Serpentine Belt; 90.55 Long, 6 Rib Count

from

$27.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 41 Long, 6 Rib Count (Part No.5060410)

Poly Rib Belt Serpentine Belt; 41 Long, 6 Rib Count

from

$46.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 94.09 Long, 6 Rib Count (Part No.5060940)

Poly Rib Belt Serpentine Belt; 94.09 Long, 6 Rib Count

from

$57.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 77.1 Long, 6 Rib Count (Part No.5060770)

Poly Rib Belt Serpentine Belt; 77.1 Long, 6 Rib Count

from

$38.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 101.58 Long, 6 Rib Count (Part No.1015K6)

Poly Rib Belt Serpentine Belt; 101.58 Long, 6 Rib Count

from

$31.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 33.27 Long, 4 Rib Count (Part No.5040333)

Poly Rib Belt Serpentine Belt; 33.27 Long, 4 Rib Count

from

$36.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 102 Long, 6 Rib Count (Part No.5061020)

Poly Rib Belt Serpentine Belt; 102 Long, 6 Rib Count

from

$59.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 38.82 Long, 6 Rib Count (Part No.5060388)

Poly Rib Belt Serpentine Belt; 38.82 Long, 6 Rib Count

from

$21.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 35.04 Long, 4 Rib Count (Part No.350K4)

Poly Rib Belt Serpentine Belt; 35.04 Long, 4 Rib Count

from

$37.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 55.12 Long, 5 Rib Count (Part No.5050551)

Poly Rib Belt Serpentine Belt; 55.12 Long, 5 Rib Count

from

$36.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Dayco – Stretch Serpentine Belt: 35.7 "Long, 4 Rib Count, Engineered For High Mileage (Part No.E040357)

Stretch Serpentine Belt: 35.7 "Long, 4 Rib Count, Engineered For High Mileage

from

$23.99
Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:
  • Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
  • Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
  • Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
  • These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt
See More

Driveworks – Poly Rib Belt Serpentine Belt; 82.09 Long, 6 Rib Count (Part No.820K6)

Poly Rib Belt Serpentine Belt; 82.09 Long, 6 Rib Count

from

$26.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Driveworks – Poly Rib Belt Serpentine Belt; 39.76 Long, 4 Rib Count (Part No.398K4)

Poly Rib Belt Serpentine Belt; 39.76 Long, 4 Rib Count

from

$14.29
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 109.06 Long, 6 Rib Count (Part No.5061090)

Poly Rib Belt Serpentine Belt; 109.06 Long, 6 Rib Count

from

$48.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 83.5 Long, 6 Rib Count (Part No.5060835)

Poly Rib Belt Serpentine Belt; 83.5 Long, 6 Rib Count

from

$50.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 55 Long, 6 Rib Count (Part No.5060550)

Poly Rib Belt Serpentine Belt; 55 Long, 6 Rib Count

from

$32.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Driveworks – Poly Rib Belt Serpentine Belt; 69 Long, 7 Rib Count (Part No.690K7)

Poly Rib Belt Serpentine Belt; 69 Long, 7 Rib Count

from

$21.29
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 33.86 Long, 4 Rib Count (Part No.5040338)

Poly Rib Belt Serpentine Belt; 33.86 Long, 4 Rib Count

from

$30.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 41.81 Long, 4 Rib Count (Part No.418K4)

Poly Rib Belt Serpentine Belt; 41.81 Long, 4 Rib Count

from

$14.29
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Driveworks – Poly Rib Belt Serpentine Belt; 37.25 Long, 4 Rib Count (Part No.373K4)

Poly Rib Belt Serpentine Belt; 37.25 Long, 4 Rib Count

from

$23.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Local Port Saint Lucie Auto Parts Stores for Serpentine Belts

Advance Auto Parts #9505
10070 S US Highway 1
Port Saint Lucie, FL 34952
(772) 337-7981
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #9507
353 E Prima Vista Blvd
Port Saint Lucie, FL 34983
(772) 878-3665
Get Directions Go to Store Page Check Availability at This Store

Get Serpentine Belts near 10070 S US Highway 1

Get Directions View Store Page

Stop by the Advance Auto Parts store #9505 located at 10070 S US Highway 1, Port Saint Lucie, FL for Serpentine Belts for your car, truck, or van. Conveniently situated to serve drivers in 34952 as well as nearby ZIP codes like 34994, 34995, and 34996, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (772) 337-7981.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Serpentine Belt or taking advantage of the free services available, this Port Saint Lucie store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
10070 S US Highway 1
Port Saint Lucie, FL 34952
(772) 337-7981 Store Location Map
Store Hours
Monday 7:30 am-9:00 pm
Tuesday 7:30 am-9:00 pm
Wednesday 7:30 am-9:00 pm
Thursday 7:30 am-9:00 pm
Friday 7:30 am-9:00 pm
Saturday 7:30 am-9:00 pm
Sunday 8:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Serpentine Belts near 353 E Prima Vista Blvd

Get Directions View Store Page

Stop by the Advance Auto Parts store #9507 located at 353 E Prima Vista Blvd, Port Saint Lucie, FL for Serpentine Belts for your car, truck, or van. Conveniently situated to serve drivers in 34983 as well as nearby ZIP codes like 34994, 34995, and 34996, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (772) 878-3665.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Serpentine Belt or taking advantage of the free services available, this Port Saint Lucie store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
353 E Prima Vista Blvd
Port Saint Lucie, FL 34983
(772) 878-3665 Store Location Map
Store Hours
Monday 7:30 am-9:00 pm
Tuesday 7:30 am-9:00 pm
Wednesday 7:30 am-9:00 pm
Thursday 7:30 am-9:00 pm
Friday 7:30 am-9:00 pm
Saturday 7:30 am-9:00 pm
Sunday 8:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes
Free In Store Services

Personalized care including battery testing and installation, oil recycling, wiper installation and more!

Advance Same Day

Free in store or curbside pickup. Plus delivery available in select markets.

Speed Perks

Get points for every purchase. Redeem points for rewards.

Now Hiring 18 Year Old Drivers

Advance your future today. Become a certified fleet driver. Apply now.

Rebates and Sweepstakes

Find out about rebate and sweepstake offers, submit your rebate online and more!

Need a Certified Technician?

We have approved professionals to repair any problem you have.