from

$154.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including the

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$17.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$113.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$52.99

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$18.99

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$45.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength
Provides conformability required for older apps
Our standard material is comparable to competitors performance bearing
Note – This material offers less resistance to wear & corrosion than other materials.
Utilizes ISO & QS certified manufacturing

from

$62.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES: Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES: Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE: Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED: Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR: Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$79.99

Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
Complete assembly – includes replacement pan and drain plugs to match original components
Durable design – high-strength coating prevents future corrosion
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$125.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$92.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$133.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$26.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$73.99

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
Durable construction – stringent specifications and careful construction help ensure longevity
Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$4664.99

Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.

Product Features:

Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.

from

$257.99

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$19.99

This engine balance shaft seal kit is designed to match the original hardware required to repair the shaft seal during service on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine balance shaft seal kit is designed to match the original hardware required to repair the shaft seal during service on specified vehicles
Ideal solution – this kit is a reliable replacement for original components required during timing belt servicing, or that have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Premium materials provide tight seal for injectors which prevents fuel leaks
High quality construction for durability
Constructed to withstand an engine environment
Application specific for this vehicle

from

$5.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$7.29

This engine timing belt idler pulley bolt is engineered to match the fit, function and performance of the original bolt to ensure that the timing belt idler pulley is securely mounted to the engine on specified vehicle years, makes and models.

Product Features:

Direct replacement – this engine timing belt idler pulley bolt is engineered to match the fit, function and performance of the original bolt on specified vehicle years, makes and models
Ideal solution – designed to securely mount the timing belt idler pulley and fix engine misfiring or other problems caused by a fatigued or sheared bolt
Durable construction – this bolt is made from quality materials for reliable service
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

from

$77.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to ACURA 97-99; HONDA 90-98; ISUZU 96-99;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1990-1999
Weight approx: 6 Lbs
HYDRAULIC
WITH SOLENOID VALVE
VACUUM TEST: 230 MM HG

from

$172.99

Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality

from

$67.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength – provides conformability required for older applications
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$39.99

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round tooth profile; designed to fit the timing sprockets precisely

from

$87.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.