GMC C3500 Parts

AT MODULATOR VALVE

Cable Bracket, GM (Bandit style shifters only) APPLICATION: For TH-400, 350, 250, 200, 700R4, 200-4R with 80797, 80798 or 81050 shifter.

Product Features:

• Shifter Service Parts
• Steel
• Natural Finish
• Sold individually
• Replacement for Bandit shifters

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

GM Genuine Parts Multi Purpose Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

AT CLUTCH PLATE

AT SPEED PINION SEAL

We offer a line of Auto Trans Shift Lever Control Rod Bushings for a range of applications. All our Auto Trans Shift Lever Control Rod Bushings are made of quality materials for a long service life.

Product Features:

• Direct replacement – these replacement auto trans shift lever control rod bushings match the original equipment design on specified vehicles
• Conveniently fix- simple solution to address worn bushings and restore original performance and feel
• Application specific – reverse engineered from the original design on certain vehicle years, makes and models
• Trustworthy quality – backed by team of engineers and quality specialists in the United States

Product Features:

• Brand may vary by location

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

ATP Detent Cable End repair damaged or bent end clips found on 1980-96 General Motors applications.

Product Features:

• Saves money by allowing cable repair instead of replacement.
• Easy to use

AT FRT PUMP BUSHING

AT DPSTK TUBE SEAL

AT PRESS SW MANIFOLD

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
• Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

• PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
• SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
• OE-STYLE DESIGN – Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

B&M Deep Transmission Pans increase the fluid capacity of your transmission, improving the cooling, allowing your transmission to work as efficiently as possible. Included drain plug, eliminates the need to drop the pan to drain the fluid.

Product Features:

• Additional Oil Capacity
• More Cooling Ability
• No Dipstick Modification
• Some Include Fluid Pickup Extension
• Built-In Drain Plugs
• Chrome Plated Steel

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Transmission cooler reinstallation kit
• Contains part numbers 248001, 226201, 240250 and 4 hose clamps
• Provides all hardware for reinstallation of Imperial transmission coolers
• Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
• Made of high grade nylon for easy installation
• Removable buttons for cooler/fan relocation
• Made for both transmission coolers and electric fan installation
• Comes with Quick Connect coupler

AT OIL PUMP GASKET

These pans are offered in stock depth or deep with extra capacity and available in both steel and aluminum to fit your specific needs. Each kit Includes the drain plug, gasket and hardware.

Product Features:

• Stock Depth And Capacity
• Chrome Plated
• Includes Drain Plug/Gasket/Hardware

These pans are offered in stock depth or deep with extra capacity and available in both steel and aluminum to fit your specific needs. Each kit Includes the drain plug, gasket and hardware.

Product Features:

• Chrome Plated For Great Looks
• Fits As Direct Replacement For Stock
• Includes: Drain Plug, Drain Plug Gasket, and Cork Pan Gasket
• Pan Height: 2.5″ Overall Height

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

• Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
• Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
• Durable construction – made of quality materials for reliable performance and long service life
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

• Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
• Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
• Durable construction – made of quality materials for reliable performance and Length service life
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

BALL STUD

When a hydraulic clutch line fails on certain vehicles, the original manufacturer makes you buy an entire clutch assembly just to replace the line. This Dorman OE FIX clutch line directly replace the original for a cost-effective repair.

Product Features:

• Direct replacement – this clutch hydraulic line exactly replaces the original line on certain Chevrolet and GMC vehicles
• Cost-effective solution – smart alternative to buying entire clutch assembly from dealership
• Reliable fit – line is pre-bent for a trouble-free installation
• Quality engineering – designed and tested in the United States

CLUTCH FORK

This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
• Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Trans Adapter-Chevrolet

LuK: The brand professionals trust. For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet clutch components. Each set contains everything you need to get the job done right. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Enjoy a light, comfortable pedal that stays consistent over the clutch’s life.
• Find the perfect LuK clutch engineered for your specific car or light commercial vehicle.
• Kits include everything needed for a quick, correct fit and reliable clutch performance.

This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

• Manufactured to meet or exceed original equipment specs
• Eliminates grinding from damaged teeth
• Increases starter drive life

Keeps dust, rocks, and debris out of the flex plate and torque converter. *Needs modification for Olds/Pontiac Starters on the driver’s side.

Product Features:

• Heavy Gauge Chrome Plated Steel
• Direct Replacement Bolt On

The release system is the connection between pedal and clutch and it has a decisive influence on the driving experience. To ensure that the clutch is easy to operate and that the power flow can be safely metered, all components of the release system must work perfectly together. Under its LuK brand, Schaeffler has played a decisive role in the development of hydraulic clutch actuation technology. LuK offers all components of the release system as spare parts for the independent market in case of a defect, with OE quality.

Product Features:

• Every LuK Clutch Slave Cylinder is precision engineered. LuK employs advanced materials and manufacturing techniques to optimize performance that results in smooth and precise clutch engagement in every driving situation.
• LuK Clutch Slave Cylinders durability offer exceptional resistance to wear, heat, and stress. This ensures that the clutch system operates reliably under all conditions, providing drivers with confidence and peace of mind on the road.
• LuK slave cylinders are designed for easy installation, ensuring a smooth and efficient replacement process.
• LuK Clutch Slave Cylinders are a high quality replacement that¿meets or exceeds OE specifications. This clutch slave cylinders focus on quality and reliability is¿designed for optimal performance¿and to extend the life of the clutch.
• LuK Clutch Slave Cylinders are a high quality replacement that┐meets or exceeds OE specifications. This clutch slave cylinders focus on quality and reliability is┐designed for optimal performance┐and to extend the life of the clutch.
• LuK products are equipped with an integrated travel sensor where needed. This senses the position of the clutch pedal. This is important for start-stop systems and functions like electric parking brake, hill-start and speed control.

Power Train

The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:

• High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
• Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
• Large Diameter, Low Profile Design
• Complete With Washers
• Sold As A Kit
• 180,000 PSI

Product Features:

• Brand may vary by location

Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. That is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating.

Product Features:

• Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
• Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter For Increased Strength And Improved Flywheel Register
• High Performance Series Is Rated
• Increased Strength
• Chevy 90░ V6 & 305-502 With 1-pc Rear Seal
• 1″ Underhead Length

This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
• Thread Size: 7/16-20
• Tread Length: 0.900 in.
• SAE
• PLEASE NOTE: Item priced and sold by each. See store for details.

AT CLUTCH PLATE

AT CLUTCH PLATE

Leaky or cracked hydraulic hose? This replacement hose is precision engineered to match the original clutch hoses on specific vehicles as part of a complete, reliable clutch repair job.

Product Features:

• Direct replacement – this clutch hose is made to match the original hose on specific vehicles.
• Thoroughly tested – validated to 4,000 PSI tolerance to ensure product safety standards
• Durable construction – made of high-grade materials designed for optimal chemical and thermal resistance
• Trustworthy value – backed by team of engineers and quality control experts in the United States

Engineered from high-quality materials to ensure chemical and thermal resistance, Tru-Torque’s Clutch Hydraulic Hose restores and maintains optimal clutch performance. New hose replacement is recommended as part of a complete clutch repair for your vehicle.

Product Features:

• Direct replacement for a proper fit every time
• Integral brackets included for ease of installation (where applicable)
• Clutch hoses with banjo-end fittings come with new copper washers for a tight seal
• All our Clutch Hydraulic Hoses are tested up to 4,000 PSI to ensure product safety standards are met

ATP Flywheel Shim

FLYWHEEL SHIM

The release system is the connection between pedal and clutch and it has a decisive influence on the driving experience. To ensure that the clutch is easy to operate and that the power flow can be safely metered, all components of the release system must work perfectly together. Under its LuK brand, Schaeffler has played a decisive role in the development of hydraulic clutch actuation technology. LuK offers all components of the release system as spare parts for the independent market in case of a defect, with OE quality.

Product Features:

• At the core of every LuK Clutch Master Cylinder lies a dedication to precision engineering. Each cylinder is meticulously designed and manufactured to exacting standards, ensuring seamless integration with the vehicle’s clutch system.
• LuK employs advanced materials and manufacturing techniques to optimize the performance of their master cylinders, resulting in smooth and precise clutch engagement in every driving situation.
• LuK products are equipped with an integrated travel sensor where needed. This senses the position of the clutch pedal. This is important for start-stop systems and functions like electric parking brake, hill-start and speed control.
• The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
• Where required LuK Master Cylinders have a peak torque limiter. It reduces the volume flow in the hydraulic system during sport driving. This prevents overloading the powertrain from sudden starts, like when slipping off the clutch pedal.

The release system is the connection between pedal and clutch and it has a decisive influence on the driving experience. To ensure that the clutch is easy to operate and that the power flow can be safely metered, all components of the release system must work perfectly together. Under its LuK brand, Schaeffler has played a decisive role in the development of hydraulic clutch actuation technology. LuK offers all components of the release system as spare parts for the independent market in case of a defect, with OE quality.

Product Features:

• At the core of every LuK Clutch Master Cylinder lies a dedication to precision engineering. Each cylinder is meticulously designed and manufactured to exacting standards, ensuring seamless integration with the vehicle’s clutch system.
• LuK employs advanced materials and manufacturing techniques to optimize the performance of their master cylinders, resulting in smooth and precise clutch engagement in every driving situation.
• LuK products are equipped with an integrated travel sensor where needed. This senses the position of the clutch pedal. This is important for start-stop systems and functions like electric parking brake, hill-start and speed control.
• The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
• Where required LuK Master Cylinders have a peak torque limiter. It reduces the volume flow in the hydraulic system during sport driving. This prevents overloading the powertrain from sudden starts, like when slipping off the clutch pedal.

CLUTCH FORK

This clutch fork is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this clutch fork is designed to match the fit and function of the original part on specified vehicles
• Ideal solution – this fork is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The Rightline Gear Truck Tent lets you experience camping in a dry truck bed, up off the ground, without the complication of tarps, stakes, and guy lines. It features a floorless design that allows you to set up or take down the tent without removing your gear from the bed. The tent is outfitted with (2) gear pockets, a lantern hanging hook, glow-in-the-dark zipper pulls, and a sky view vent. Measure the inside of your truck bed with the tailgate up and check the Truck Tent Sizing Guide. Turn any spot into a comfortable campsite!

Product Features:

• Floorless design allows for set up without removing gear from the bed
• Protective heavy duty straps and nylon buckles, won’t damage truck’s finish
• Color coded poles and pole pockets for quick and easy set up
• Water resistant fabric with tape sealed seams (PU 2000mm)
• Sky view vent for more light, ventilation, and sleeping under the stars
• All truck tents sleep (2) adults
• Includes: tent, rainfly, stuff sack, and sewn-in set up guide

All-Weather Floor Mats Are Custom, Flexible All Season Vehicle Floor Mats With Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. All-Weather Floor Mats Are Engineered To Prevent Curling And Cracking In Sub-Zero Weather. The WeatherTech All-Weather Floor Mats Have Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. Our All-Weather Floor Mats Are Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved, Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable All-Weather Floor Mats Are Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy. To Prevent Shifting, The All-Weather Floor Mats Features Anti-Skid Ridges On The Underside Of The Mat. All-Weather Floor Mats Were Intended To Give The Best Possible Protection For Your vehicle Floor. Many Of Our Front And Rear Mat Applications Are Model Specific, While Others Are Assigned As The Best Possible Fit For Your Vehicle From Our Many Shapes And Sizes. Some Rear Mat Sizes Are Designed To Be Trimmed So That They May Be Customized To Fit Almost Any Vehicle.

Product Features:

• Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand
• Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable
• Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy
• All Weather Floor Mats Were Intended To Give The Best Possible Protection For Your Vehicle Floor

This license plate bracket is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this license plate bracket matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bracket is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The Budge Basic truck cover offers single layer, basic protection against dust and debris – at a budget friendly price. Lightweight and easy to use, this vehicle cover is perfect for indoor use or occasional outdoor protection. The Budge Basic cover is constructed from a single layer of polypropylene. This material is fully breathable to prevent mold and mildew. This truck cover is nonabrasive and will not harm your vehicle’s exterior. The Budge Basic cover is light gray in color. This is a suitable indoor and short term outdoor cover for your truck. Our covers are available in a variety of sizes that will popular truck makes and models. Cover includes a storage bag and antenna patch.

Product Features:

• This truck cover fits trucks 264″ L x 80″ W x 60″ H
• This truck cover is suitable for indoor and short term outdoor storage
• This vehicle cover features double stitched seams for added durability
• A full elastic hem helps keep the car cover securely on your vehicle
• Will defend against dust, dirt, bird droppings, tree sap and more

Circulation Tank Heater is Available in 850W, 1000W, 1500W, and 2000W, 120V and 240V. This heater is thermostatically controlled 135 degrees-175 degrees. Moderate mechanical ability is required for installation. Uses versatile strap type mounting.

Product Features:

• Available for all size engines
• Equipped with check valve
• Fits most liquid cooled engines
• Installations easier and simpler
• New lower radiator hose connectors

AVS Ventshade is the original Auto ventshade product. Offered for many classic vehicles it is the standard that created the side window deflector industry. Its ledge profile that is mounted in the window channel combined with its stainless steel construction makes Ventshades the standard by which all others are measured.

Product Features:

• Ledge Profile That Is Mounted In The Window Channel For A Secure Mount
• Keeps Rain Out And Lets Fresh Air In
• Manufactured From High-Quality Steel
• Available In Polished Stainless And Black Finishes
• Quick And Easy Installation

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Driver Side Front Side Marker Light Assembly, With Dual or Composite Headlight, 1-Piece Design Beside the Headlight, Gmc Only. It is Designed to Replace Your Existing Side Marker Lamp Assembly. Check to Be Sure It Fits Your Vehicle.

Product Features:

• With Dual Or Composite Headlight, 1-Piece Design, Beside The Headlight, GMC Only, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Dee Zee Transfer Tanks A safe and convenient means for transporting non flammable liquids. Constructed of heavy Gauge aluminum. Radius curve design eliminates key weld pressure points. Tanks feature 3 stability baffles, lockable cap, 3/8 Inch drainage plug and venting coupler. Tanks are intended for private use (non commercial).

Product Features:

• Made From Non-Rusting Brite-Tread Aluminum
• Perfect For Transporting Liquids
• Radius Curve Design Eliminates Key Welded Pressure Points
• Many Handy Styles To Fit Most Needs

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

• Custom fit to the windshield for complete coverage
• Protect the dash and other interior components from damage by the sun
• Reduce the interior temperature of the vehicle on hot days
• The foam core center of the shield acts as an insulator
• Easy to use and store away when not in use

AVS Hoodflector is a medium profile version of hood protection. The Hoodflector helps to prevent damage from road debris. It installs quickly and easily due to the custom applications for trucks, vans, SUVs and CUVs.

Product Features:

• Provides Deflection To Protect Hood, Fenders, And Windshield
• Medium Profile, Wrap-Around Design For Trucks And SUVs
• Off-The-Hood Design Allows For Easy Cleaning And Waxing
• Durable, Impact-Resistant Acrylic Construction
• Available In Dark Smoke
• Easy, No-Drill Installation

AVS Bugflectors help prevent damage to the hood, windshield and fenders from road debris and bugs. Bugflector comes in a traditional hood width design that improves the look of your vehicle and protects your investment. Bugflectors install quickly and are molded with a higher profile with custom fit applications for trucks, vans, SUVs and CUVs.

Product Features:

• Provides Deflection To Protect Hood, Fenders, And Windshield
• High Profile, Narrow Tapered Design For Trucks, SUVs, And Vans
• Off-The-Hood Design Allows For Easy Cleaning And Waxing
• Durable, Impact-Resistant Acrylic Construction
• Available In Dark Smoke Finish
• Easy, No-Drill Installation

This door armrest is designed to match the fit and appearance of the original armrest on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this door armrest is designed to match the fit and appearance of the original armrest on specified vehicles
• Restores functionality – this armrest is made to fully restore appearance and functionality after the original part fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This door armrest is designed to match the fit and appearance of the original armrest on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this door armrest is designed to match the fit and appearance of the original armrest on specified vehicles
• Restores functionality – this armrest is made to fully restore appearance and functionality after the original part fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

AVS In-channel Ventvisors offer a sleek profile that helps keep rain out and lets fresh air in to reduce interior heat build up. It’s easy no-drill application makes installation and provides a custom fit for your vehicle.

Product Features:

• Precision Engineered For A Custom Fit On Your Vehicle With Modern, Curved Low-Profile Design
• Installs In The Window Channel For A Sleek, Aerodynamic Appearance
• Made From Durable, Impact-Resistant Acrylic
• Available In Dark Smoke Finish

AVS Original Ventvisor is an external mount side window deflector with an unique design that allows fresh air to circulate through open windows while keeping the weather out reducing interior heat and window fogging. Original Ventvisors come with a Limited Lifetime Warranty.

Product Features:

• Precision Engineered For A Custom Fit On Your Vehicle With Modern; Curved Design
• Easy Installation With No-Drilling Or Special Hardware Required
• Attaches Easily With 3M(TM) Automotive-Grade Adhesive Above The Window
• Made From Durable; Impact-Resistant Acrylic
• Available In Dark Smoke And Chrome Finishes

Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:

• FIAMM AM80SX LOW note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
• Universal Fit
• FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
• Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
• FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle. Proven to offer outstanding resistance to wear and tear
• 133dB @ 4″, 12V

Cracked or wore out your key fob case- Want to add a custom look- Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.

Product Features:

• Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look
• Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
• Reliable construction – keeps moisture and debris out of internal electronics for long service life
• Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

TrailFX(R) Contractor Racks are designed and manufactured with both functionality and durability as a top priority. These racks are fully adjustable and will fit full-size pickup trucks with either short or long beds.

Product Features:

• Adds Convenience For Hauling Cumbersome Equipment Or Materials
• Durable Steel Cleats Are Welded To Each Upright
• Rear Cross Member Can Be Easily Removed To Accommodate Taller Items
• Black Powder Coated Finish
• No Drilling Required When Installed With Supplied J-Hooks
• Adjustable To Fit Both Long And Shortbed Models

TrailFX Contractor Racks are designed and manufactured with functionality, adjustability, along with a heavy duty carrying capacity as top priority.

Product Features:

• Adjustable To Fit Long And Short Bed With Regular, Extended Or Crew Cab Trucks: Fits All Fullsize Pickup Trucks
• Rated To Support Up To 1,500 Pounds Loads
• Rear Grab Handle Built In To Assist With Access Into Truck Bed Or Loading Tools On To Rack System
• Rear Crossbar Easy To Remove If Needed For Tall Cargo
• Rope Ties On Each Corner
• Heavy Duty Steel Construction
• Can Be Mounted Permanently Or Temporarily With No Drill J Hooks
• No Drill Installation Provided

Short style. The offset cam and crankshaft key is another method to increase torque and horsepower within the operating range you select.

Product Features:

• Increases Low-End Torque
• Increases Mid-Range Horsepower
• Reduces Low-End Torque
• Increases Top-End Horsepower

You can never have enough rugged storage. Whether you are storing tools, hauling game day gear, or coming up with literally hundreds of other uses- Dee Zee universal poly plastic chest is like the Swiss Army Knife of utility chests. Constructed of strong yet lightweight plastic with a double wall lid, our universal utility chest can handle all the abuse you can throw at it. We have designed our utility chest to add quick, convenient storage for all sorts of applications. Available in two sizes to suit your needs. We even provided molded drink holders in case you decide to use it on the go and get a little thirsty. Do not worry if the weather does not cooperate, a foam gasket around the lid helps defend your items against the elements.

Product Features:

• Classic Raised Brite Tread Pattern
• Rigid Frame Resists Warping
• Molded Locking Tabs
• Poly Plastic Storage Chest Rigid Plastic Frame Resists Warping
• Made In USA

GM Genuine Parts Turn Signal Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

This horn contact repair kit is designed to match the original components required to repair the horn on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this horn contact repair kit is designed to match the original components required to repair the horn on specified vehicles
• Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This console multi-function switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this console multi-function switch is made to match the fit and performance of the original switch on specific vehicle applications
• Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

UltiMat dashboard covers are the best fitting, best looking dashboard cover on the market. Construction begins with durable, color-fast non-shrinking need punch carpet that goes through a soft mold process to fit the exact shape of your dashboard. This technique creates a PERFECT fit on every ridge and curve of your dashboard, all without seams or darts. Available to fit most trucks and SUV’s. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The best fitting best looking dash cover on the market for trucks and SUV’s
• Soft molded to the exact shape of your dashboard
• A perfect fit on every ridge and curve of your dashboard
• Made of durable color-fast non-shrinking needle punch carpet
• All vents and sensor openings pre-cut for a factory-finished look

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

This radio knob is designed to match the fit and function of the original control knob on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this radio knob is designed to match the fit and function of the original control knob on specified vehicles
• Restores functionality – this knob is made to fully restore appearance and functionality after the original part fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Instrument Panel Dimmer Switch allows drivers to adjust the brightness of the dashboard lights, enhancing visibility and reducing glare during night driving for a more comfortable driving experience. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

This horn connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this horn connector matches the appearance and function of the factory hardware on specified applications
• Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This instrument cluster has been professionally remanufactured to precise specifications to help restore the original factory functionality and appearance on specified vehicles, and has been rigorously tested to ensure reliability.

Product Features:

• Direct replacement – this instrument cluster is designed to match the fit and function of the original cluster that is damaged or malfunctioning on specified vehicles
• Ideal solution – engineered to help restore original equipment functionality and appearance
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
• (Please contact the Special Order Team (AAP Special Orders or DC Product Support for CQ Stores) for further support and processing of Rebuild and Return Service)

This turn signal cam is designed to match the fit and function of the original cam on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this turn signal cam is designed to match the fit and function of the original cam on specified vehicles
• Restores functionality – reliable replacement for an original part that has failed due to wear or collision damage
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

This console multi-function switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this console multi-function switch is made to match the fit and performance of the original switch on specific vehicle applications
• Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Product Features:

• Installs in stock location using factory hardware for easy installation
• Designed for use with Holley No. 145-160 Accelerator Pedal or C6 Corvette pedal assembly No. 19417903
• Black powder coated finish provides a neat, clean appearance and durability
• CNC cut and formed for consistent precision
• Bolts in OE location using OE hardware (or included hardware if preferred)

The Accelerator Pedal Position (APP) sensor provides a signal identifying the location of the accelerator pedal to the engine control module. As the vehicle operator requests various degrees of torque from the engine the signal from the sensor provides the engine computer the necessary information to implement the request. The sensor provides two positive slope signals that have an offset voltage range and increase at different rates, the two signals from the sensor provide the engine computer with two unique signal inputs ensuring safety should one signal fail.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

GM Genuine Parts Turn Signal / Combination Levers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

ATP Speedometer Cable Core Kit provides a lower cost alternative to cable repair when the cable core has broken or kinked. Each kit includes 0.130″ diameter S.A.E./O.E.M. standard multi-coiled wire cable with squared end, universal metal tip and spacer washer. Cut cable end to desired length and attach tip using staking tool (included). The overall length of the cable core is 83″.

Product Features:

• Easy to install
• Will fit many custom applications
• Low cost alternative

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. Vehicle switches provide versatile control for various electrical functions within the vehicle, enhancing convenience and safety by allowing drivers to easily operate features such as lights, wipers, and accessories with a simple flick or press. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Pressure formed for exact fit. Heavy-duty nylon carpet. Electronically welded heel pad. Mildew resistant padding. Shifter locations marked (if applicable). Enhanced durability. Easy installation.

Product Features:

• Pressure Formed for Exact Fit
• Heavy-Duty Nylon Carpet
• Electronically Welded Heel Pad
• Mildew Resistant Padding
• Shifter Locations Marked
• Enhanced Durability
• Easy Installation

This HVAC heater control knob is designed to match the fit and function of the original control knob on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this HVAC heater control knob is designed to match the fit and function of the original control knob on specified vehicles
• Restores functionality – this knob is made to fully restore appearance and functionality after the original part fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Speedometer cables connect the speedometer to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Speedometer cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

• Includes Cable Lube
• Plastic sheath protects cable from debris and water
• Comes ready to install

Standard Installation Kit. This is the standard Grant Steering Wheel Installation Kit. These kits may be used to install all Classic Series, Challenger Series or Signature Series Steering Wheels. Each kit contains complete step-by-step instructions, a die cast hub, grade 5 hardware and matte black trim pieces.

Product Features:

• Use To Install All Classic, Challenger Or Signature Series Wheels
• Each Kit Contains Complete Step-By-Step Instructions, A Die Cast Hub, Grade 5 Hardware And Matte Black Trim Pieces
• ISO/ TS Certified
• Designed To Mount Our Wheel To Your Rig
• Use with all Grant Classic/Challenger/Signature Steering Wheels

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

This pocket CD storage unit is used to replace Chevrolet full size factory pockets for GM 88 to 94 models.

Product Features:

• OEM radio replacement pocket
• Includes ribs to hold cassettes in box or CD jewel case
• To be used with brand models 99-3000
• Made with high grade ABS plastic