GMC C3500 Tools
Top GMC C3500 Tools Categories
We carry over 51 Tools in inventory for the GMC C3500. If you’re looking for aftermarket Tools for your GMC C3500, check out all these categories:
Essential GMC C3500 Tools
Yukon Gear – Differential Housing Spreader For Dana Housings (Part No.56035)
from
$709.99
Differential Housing Spreader for Dana 30, 44, 60, 61, 70, and 80. The Yukon Differential Housing Spreader allow you to safely & easily set carrier bearing preload, saving time and money. No return. This tool is not compatible with Corvette housings.
Product Features:
See More
Product Features:
- Housing spreader
- Works on Dana 30, 44, 60, 70 and 80 applications
- Allows for proper carrier bearing preload to be set
Yukon Gear – Yoke Holder Tool (Part No.56066)
from
$159.99
Yoke holder tool, fits most yokes. 1310/1330/1350/1410/7260/7290/MR3/Toyota. No return.
Product Features:
See More
Product Features:
- Yoke holder tool
- Firmly holds pinion yoke in place allowing for easier pinion preload setting
Felpro – Engine Crankshaft Repair Sleeve Tool (Part No.16316)
from
$42.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Hypertech – ThermoMaster Power Computer Chip, with Overdrive (Part No.123092)
from
$214.49
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
- Product might not be available in all states due to local laws.
Hypertech – ThermoMaster Computer Power Chip, 5 Speed Model Only, California Model Only (Part No.858822)
from
$166.99
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
Hypertech – ThermoMaster Power Computer Chip, with Overdrive (Part No.122172)
from
$214.49
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
Melling – Oil Pump Screen Installation Tool (Part No.MCAT-62)
from
$108.99
Melling suggests that a new properly installed oil pump pick-up tube or screen be a part of every oil pump installation. Melling oil pump screen installation tools provide an easy method for installing a press fit oil pump screen into the oil pump correctly without damaging the oil pump screen tube. Melling oil pump screen installation tools are precision manufactured from high quality materials for worry free performance every time. Melling offers oil pump screen installation tools for both 5/8 inch and 3/4 inch diameter tubes.
Product Features:
See More
Product Features:
- Screen installation tool allows for installing press-in type oil pump screen assembly safely
- Manufactured from high quality materials for consistent durability
- For use with 5/8 In. diameter tubes
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
Melling – Oil Pump Screen Installation Tool (Part No.MCAT-75)
from
$127.99
Melling suggests that a new properly installed oil pump pick-up tube or screen be a part of every oil pump installation. Melling oil pump screen installation tools provide an easy method for installing a press fit oil pump screen into the oil pump correctly without damaging the oil pump screen tube. Melling oil pump screen installation tools are precision manufactured from high quality materials for worry free performance every time. Melling offers oil pump screen installation tools for both 5/8 inch and 3/4 inch diameter tubes.
Product Features:
See More
Product Features:
- Screen installation tool allows for installing press-in type oil pump screen assembly safely
- Manufactured from high quality materials for consistent durability
- For use with 3/4 In. diameter tubes
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
Dorman – GM Air Conditioning Schrader Valve M12 X 1.50 (Part No.800-955)
from
$10.29
This A/C service valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this A/C service valve is designed to match the fit and function of the original valve on specified vehicles
- Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Spindle Boring Tool Replacement Cutter For Dana 80 Yt H32 (Part No.56068)
from
$547.99
Dana 80 replacement cutter for spindle boring tool. Bit diameter is 1.630″.
Product Features:
See More
Product Features:
- Spindle boring tool replacement bit
- Fits Dana Spicer 80 and AAM 11.5″ design
Yukon Gear – Dana 80 & GM/Chrysler 11.5" Spindle Id Boring Tool For 37 & 38 Spline Axle Conversion (Part No.56069)
from
$949.99
NO RETURN Dana 80 & GM/Chrysler 11.5″ spindle ID boring tool for 37 & 38 spline axle conversion. Cutting bit diameter is 1.630″.
Product Features:
See More
Product Features:
- Spindle boring tool
- Fits Dana Spicer 80 and AAM 11.5″
Dorman – Brake Bleeder (Part No.N7050831840DOR)
from
$3.25
Brake Bleeder
Felpro – Engine Timing Cover Repair Sleeve Tool (Part No.16311)
from
$44.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Wearever – Bleeder Screw (sold by each) (Part No.301H9406)
from
$0.99
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- Provides smoother braking
- This part matches Original Equipment (OE) quality specifications
Carquest Wearever – Bleeder Screw (Part No.H9406-2)
from
$4.29
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- This part matches Original Equipment (OE) quality specifications
Earls Performance Product – Brake Bleeder Screws (Part No.280022ERL)
from
$32.59
Brake Bleeder Screws
Carquest Wearever – Bleeder Screw (sold by each) (Part No.3019402RY)
from
$0.99
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- Provides smoother braking
- This part matches Original Equipment (OE) quality specifications
Dorman – Brake Bleeder (Part No.N7050566021DOR)
from
$11.50
Dorman’s Disc Brake Bleeder Screws are engineered to help you effectively bleed the brake system. We offer a full line of Brake Bleeder Screws for a broad spectrum of vehicle applications.
Product Features:
See More
Product Features:
- Helps restore brakes to proper operation
- Corrosion-resistant for long-lasting durability
- Direct replacement for a proper fit
- Manufactured to strict engineering quality standards
Carquest Wearever – Bleeder Screw (sold by each) (Part No.301H9405)
from
$0.99
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- Provides smoother braking
- This part matches Original Equipment (OE) quality specifications
Carquest Wearever – Bleeder Screw (Part No.H9402-2)
from
$3.79
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- This part matches Original Equipment (OE) quality specifications
Russell – Speed Bleeder, Thread Size – 10 mm X 1.5 (Part No.639580)
from
$18.99
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More
Russell – Speed Bleeder, Thread Size – 8 mm X 1.25 (Part No.639520)
from
$18.99
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More
Earls Performance Product – Solo Bleed (Part No.280025ERL)
from
$30.99Product Features:
- Prevents Air Inclusion
- Direct Replacement
- For OE Bleeders
- One Person Bleeds Safely
- Without The Mess
- No Chance Of Air Bubbles
Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)
from
$40.99
Brake Bleeder Screws
Dorman – Bleeder Screw-GM-M10-1.5 x 27.55mm (sold by each) (Part No.484-152)
from
$1.29
This brake bleeder screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake bleeder screw matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
GMC C3500 Tools Categories
Helping You Find the Right Tools for Your GMC C3500
You love your C3500. So we’ve made it easier than ever to help you find GMC C3500 Tools in our online catalog. Our inventory holds 51 aftermarket and OEM Tools for your GMC C3500, ranging from $0.99 to $949.99.
We offer parts from 8 brands trusted to make quality Tools for your GMC C3500. Before you buy, take some time to read through customer reviews. We currently have 7,297 reviews of GMC C3500 Tools from previous customers. Some of the top rated parts include Bleeder Screw (sold by each) with 5.0 stars and Oil Pump Screen Installation Tool with 3.0 stars.
Find your C3500 Tools here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC C3500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Tools Brands for Your GMC C3500
Our inventory holds Tools for your GMC C3500 from 8 trusted brands. You’ll find OEM and aftermarket parts from brands like Dorman, Carquest, and Earls Performance Product, all of which can keep that GMC happy.
We have Dorman parts available for your GMC C3500 in categories like Tire Tools and Brake Tools. Some of the top-rated Dorman parts in these categories are:
Top-Rated Dorman – Help Tools
Leading Dorman – Help Tools
We carry Dorman – Help brand parts for your GMC C3500 across several catalog categories, including Brake Tools. Some of our most reviewed Dorman – Help parts include:
FAQs for GMC C3500 Tools
What are the most purchased Tools for the GMC C3500?
Out of 51 Tools for the GMC C3500, the most popular in our inventory are:
What are the top-rated GMC C3500 Tools?
Top-rated Tools for your GMC C3500 based on customer reviews/ratings are:
from
$0.99
(1)
Bleeder Screw (sold by each)
“Worked great for my 06 Chevy Colorado thanks advance auto”
from
$108.99
(1)
Oil Pump Screen Installation Tool
“I purchased an MCAT-62 Oil Pump Screen installer for a 2001 Pontiace Montana 3.4 The problem is it requires an MCAT-75, I believe the product would be”
from
$3.79
(1)
Bleeder Screw
“Did not fit for dodge dakota says it fits but its way too long and shot brake fluid right out of the vavle when it was all the way threaded down”
