GMC C35 Parts

GMC C35 Body Parts

from

$46.99

New Standard Replacement Passenger Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4

Product Features:

46 3/4 X 11 3/4, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$331.99

With over 70 years of manufacturing excellence, CARR is a third generation business that remains firmly committed to serving you. All CARR accessories are manufactured for a precise fit for today vehicles. Our manufacturing processes allows us to design products that give your vehicle unique personal style and appeal. Our cast aluminum construction is time-proven for durability and strength. All CARR products carry a limited lifetime warranty.

Product Features:

Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
Rugged Tread Pattern Provides For Safe And Attractive Non-Slip Surface
Innovative Stylish Design
Strong Construction To Hold Up Under Extreme Conditions
Exclusive New Multi-Mount System
Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products

from

$37.99

New Standard Replacement Fuel Door

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$193.99

New ProEFX Rear Roll Pan, Without License Plate Part

Product Features:

Without License Plate Part
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$528.99

New Standard Replacement Passenger Side Fender

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$48.49

The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.

Product Features:

Classic Styling Of Brite-Tread Aluminum
Front Or Rear Wheel Protection
Radius Notch Contours To The Fender Well
Protected By A BriteGard Powder Coat Finish

from

$311.99

Popular diamond thread design. Downsize and compact. 350 pounds tongue weight and 35000 pound trailer weight certified.

Product Features:

Popular Diamond Tread Design
Full Size Tongue Weight of 800 lbs. And 8000 lbs. Trailer Weight
Downsize and Compact Are 350/3500 lb. Weights
V5 Tested Certified To SAE J684
Mount Kit Sold Separately

from

$25.99

New Goodmark Driver Side Tailgate Trunnion, For Fleetside Pickups

Product Features:

For Fleetside Pickups
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$34.49

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles.
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$27.99

New Goodmark Passenger Side Inner Cab Corner

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$31.99

New Standard Replacement Rear Passenger Side Wheel Opening Molding

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$506.99

Dee Zee Rough Step – Industrial gauge steel coated in Dee Zee black NRT (No Rust Technology) powder coat to increase corrosion resistance. Industrial grating step provides extra traction getting in and out of the vehicle while allowing mud, water, snow, and ice to drain off the stepping area.

Product Features:

No Rust Technology Powder Coat Is A Specially Designed To Increase Corrosion Protection
Industrial Grating Step Provides Extra Traction Getting In And Out Of The Vehicle While Allowing Mud, Water, Snow, And Ice To Drain Off The Stepping Area
Rugged 12 Gauge Steel Construction
Protective Black Powder Coat Finish
Grated Steel Top Provides Unmatched Traction

from

$10.99

New Goodmark Box Of 25 Hood Pad Clips, Replaces Gm 3977775, 2 Inch Diameter

Product Features:

2 Inch Diameter
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$968.99

Even if you secure your cargo properly, it can still happen. Driving on todays hectic roads can lead to extreme stopping situations that could end up sending cargo barreling through your truck cab rear window. With the Dee Zee Cab Rack this is no longer a concern. Made of 100 Percent 2.5 Inch aluminum tubing with a protective textured black powder coating, our cab racks are built to handle as much abuse as you can throw at them. A rear window protection screen consists of either heavy duty ultra-mesh – for your protection and visibility requirements.

Product Features:

Rugged Protection For Your Trucks Rear Cab Area
2.5 Inch Hexagonal Aluminum Tubing For Rugged Construction
Heavy-Duty Aluminum Ultra Mesh Offers More Visibility And Protection Depending On Your Needs
Protective Textured Black Powder Coat Finish Keeps Your Rack Looking Fresh
Integrated Channel System For Easy Addition Of Accessories
Install Into Existing Stake Pocket Holes

from

$14.99

This door window switch is designed to match the fit, function and performance of the factory switch on specified vehicles. It is engineered to help restore window switch functionality to original equipment standards when the factory part is missing, broken, or has failed from internal electrical or mechanical component damage.

Product Features:

Direct replacement – this door window switch is designed to match the fit, function and performance of the factory switch on specified vehicles.
Ideal solution – engineered to help restore window switch functionality to original equipment standards when the factory part is missing, broken, or has failed from internal component damage
Restores appearance – manufactured to precise specifications for a seamless installation and fit that complements the vehicle interior
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$53.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Driver Or Passenger Side Manual Door Mirror, Below Eyeline Type, Stainless Steel. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:

Below Eyeline Type, Stainless Steel, Flat Glass
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$19.99

New Goodmark Front Passenger Side Lower Fender Molding, Except 1977 Models, Made Of Aluminum

Product Features:

Except 1977 Models Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$8.99

This window regulator hardware kit is designed to match the original hardware required to service or install the window regulator on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this window regulator hardware kit is designed to match the original hardware required to service or install the window regulator on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have been lost or broken
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$553.99

Dee Zee Red Label Chest is the perfect solution. Constructed of heavy duty Brite-Tread aluminum it can take a serious amount of abuse. A crown style lid with a full pan double-V stiffener offers superior rigidity for whatever you decide throw at it. Lockable stainless steel paddle handles keep your items safe and secure from the types of people your mother warned you about. Dampened gas shocks and adjustable strikers keep lid operation smooth and effortless. What good is a utility chest if it turns into a kiddie pool every time it rains. that is why we fortify our Red Label Series with closed cell foam gasket to keep outside elements where they belong. Our Red Label Utility Chest is forged out of non-rusting .056 Brite-Tread aluminum using internal bends for superior strength to create a box that can withstand years of abuse.

Product Features:

Paddle Handles With Guide Plate- Lockable, Stainless Steel Handles
Lockable Stainless Steel Paddle Handle Latch
Slanted Front To Avoid The Wheel Wells Or Traditional Square
Closed Cell Foam Gaskets- Helps Keep The Elements Out Of The Box
Front, Back, And Bottom All One Piece For Increased Body Strength
Dampened Gas Shocks Open At A Steady, Controlled Rate And Removable Plastic Tool Tray To Keep Smaller Items Organized
Full Length Piano Hinge For Extra Strength
Front, Back And Bottom Are Bent From A Single Piece Of Aluminum

from

$99.99

New Goodmark Bed Cross Sill For Stepside Pickups, 3 Required For Short Bed Models, 5 Required For Long Bed Models

Product Features:

3 Required For Short Bed Models 5 Required For Long Bed Models
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$22.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$18.99

New Standard Replacement Driver Side Lower Rear Tip Of Fender, 12 1/4 X 12 1/4

Product Features:

12 1/4 X 12 1/4, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$131.99

New Goodmark 4 Piece Inner And Outer Windowfelt Kit, For Front Doors

Product Features:

For Front Doors
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$55.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$54.99

New Goodmark Spare Tire Support Hook, For Models With Glide-Out Spare Tire, Made Of Steel

Product Features:

For Models With Glide-Out Spare Tire Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

GMC C35 Transmission Parts

from

$84.99

This Basic Rebuild Kit contains a complete gasket Kit and friction set. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:

Does not include steels or filter

from

$47.49

ACDelco Professional Neutral Safety Switch is a high quality aftermarket replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This premium aftermarket switch is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$36.49

CONE

from

$7.99

AT EXT HOUSING SEAL

from

$81.99

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.

from

$29.49

from

$5.99

AT DPSTK TUBE SEAL

from

$7.49

SHAFT SEAL

from

$6.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$14.79

Product Features:

Transmission line fitting kit
GM, Jeep; 5/8″-18 inverted flare
Helps simplify transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Coated for extra protection against corrosion

from

$8.99

AT CLUTCH PLATE

from

$28.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$3.99

AT SOLENOID SEAL

from

$7.99

AT SEL SHAFT SEAL

from

$18.99

Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. That is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating. Complete with washers and nuts where applicable.

Product Features:

Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter
Flanged Nut
Increased Strength And Improved Flywheel Register
Chevy 90░ V6 & 305-502 With 1-pc Rear Seal
0.725″ Underhead Length
200,000 PSI

from

$4.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$48.99

AT MODULATOR VALVE

from

$17.99

Manufactured with premium-grade steel, National® taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$32.99

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

Designed specially for high-torque and high vibration applications
Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
OEM specified
Low-odor, non-corrosive formula
Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

from

$12.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$774.99

Hays Race Tq Convtr Th400 24-2800 Stall

from

$84.99

When swapping the TH400 transmission into any vehicle, this kit makes installation of the transmission’s kickdown feature a snap. This switch mounts to either a TH700R4, TH200, TH200-R4 or TH350 throttle cable bracket.

Product Features:

Allows High Speed Cruise
Cruise In Overdrive
Prevents Part Throttle Kickdown
Quick Installation

from

$8.29

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 66-73; CHEV 58-84; GMC 67-84; OLDS 68-72; PONT 61-77;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1958-1984
Weight approx: 2 Lbs
RUBBER CROWN WITH AIR GAP
HEIGHT WITHOUT STUDS: 1.9 INCH: 48.25 MM
STUDS AND BOLT HOLES INLINE
STUD CENTERLINE: 1.5 INCH: 38.1 MM

from

$44.99

A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

from

$9.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 65-74; CHEV 57-84; GMC 67-84; OLDS 64-79; PONT 64-81;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1957-1984
Weight approx: 2 Lbs
HEIGHT: 1.8 INCH: 45.7 MM
ALL BOLT HOLES INLINE
BOLT CENTERLINE: 1.5 INCH: 38.1 MM

GMC C35 Clutch Systems

from

$39.99

LuK OE Quality Replacement Release Fork

from

$10.49

This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$18.99

M/T FLYWHEEL BOLT

from

$28.49

This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles.
Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$28.99

Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles.
Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.99

The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Manufactured to meet or exceed original equipment specs
Eliminates grinding from damaged teeth
Increases starter drive life

from

$907.99

Hays650 Cltch 55-85 GM 6-8Cyl:11In:10Sp

from

$138.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$121.99

Power Train

from

$35.99

Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability

Product Features:

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$689.99

Trans Adapter-Chevrolet

from

$26.99

FLYWHEEL SHIM

from

$27.99

ATP Flywheel Shim

from

$13.99

AT CLUTCH PLATE

from

$12.99

AT CLUTCH PLATE

from

$20.99

The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:

High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
Large Diameter, Low Profile Design
Complete With Washers
Sold As A Kit
180,000 PSI

from

$20.99

This clutch pivot ball is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pivot ball is designed to match the fit and function of the original part on specified vehicles.
Ideal solution – this pivot ball is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.29

This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.99

Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$58.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Design improvements include extended life and quiet operation
Industry leading coverage
Professional technicians know they can depend on National

from

$44.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Design improvements include extended life and quiet operation
Industry leading coverage
Professional technicians know they can depend on National

from

$90.99

Power Train

from

$14.79

Product Features:

Brand may vary by location

GMC C35 Automotive Accessories

from

$804.99

TrailFX Contractor Racks are designed and manufactured with functionality, adjustability, along with a heavy duty carrying capacity as top priority.

Product Features:

Adjustable To Fit Long And Short Bed With Regular, Extended Or Crew Cab Trucks: Fits All Fullsize Pickup Trucks
Rated To Support Up To 1,500 Pounds Loads
Rear Grab Handle Built In To Assist With Access Into Truck Bed Or Loading Tools On To Rack System
Rear Crossbar Easy To Remove If Needed For Tall Cargo
Rope Ties On Each Corner
Heavy Duty Steel Construction
Can Be Mounted Permanently Or Temporarily With No Drill J Hooks
No Drill Installation Provided

from

$812.99

TrailFX(R) Contractor Racks are designed and manufactured with both functionality and durability as a top priority. These racks are fully adjustable and will fit full-size pickup trucks with either short or long beds.

Product Features:

Adds Convenience For Hauling Cumbersome Equipment Or Materials
Durable Steel Cleats Are Welded To Each Upright
Rear Cross Member Can Be Easily Removed To Accommodate Taller Items
Black Powder Coated Finish
No Drilling Required When Installed With Supplied J-Hooks
Adjustable To Fit Both Long And Shortbed Models

from

$117.99

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

Custom fit to the windshield for complete coverage
Protect the dash and other interior components from damage by the sun
Reduce the interior temperature of the vehicle on hot days
The foam core center of the shield acts as an insulator
Easy to use and store away when not in use

from

$52.99

The Original Covercraft UVS100 Sunscreen has been a customer favorite for decades! These unique sun shades are made to fit your exact windshield specific to the Year, Make and Model of your vehicle. With a perfect fit to your windshield, you get maximum interior protection from harmful UV rays and damaging heat. Unlike other flimsy sun shades, heat shields, or UV shields our Custom UVS100 Sunscreens use a thick foam core with a triple laminate construction and a soft felt backing. This means that you get superior insulation that reflects and absorbs heat to dramatically reduce the interior vehicle temperatures. The unique design of our Custom Sunscreens allows them to be easily folded up when not in use perfect for compact storage. This makes it easy to fold up and stow behind your seat without fear of it getting stepped on. Our Original UVS100 is available in 5 colors to give your vehicle a unique look. Keep your interior looking like new, prevent fading and cracking, and reduce the heat build-up in your vehicle with the Best-Fitting Custom Sunscreen.

Product Features:

Custom fit to the windshield for complete coverage
Protect the dash and other interior components from damage by the sun
Reduce the interior temperature of the vehicle on hot days
The foam core center of the shield acts as an insulator
Easy to use and store away when not in use

from

$1427.99

Dee Zee Transfer Tanks A safe and convenient means for transporting non flammable liquids. Constructed of heavy Gauge aluminum. Radius curve design eliminates key weld pressure points. Tanks feature 3 stability baffles, lockable cap, 3/8 Inch drainage plug and venting coupler. Tanks are intended for private use (non commercial).

Product Features:

Made From Non-Rusting Brite-Tread Aluminum
Perfect For Transporting Liquids
Radius Curve Design Eliminates Key Welded Pressure Points
Many Handy Styles To Fit Most Needs

from

$793.99

Transporting fluids around your property or to the job site can be challenging logistically, especially when trying to fit cargo into your truck bed. If you are looking for a safe and convenient way to transport Non-Flammable fluids while still leaving room in your truck bed for cargo check out the Dee Zee Long Rectangle Transfer Tank. Constructed of rugged high-quality steel with a black powder coat finish to ensure lasting protection. A radius curve design eliminates key welding points making this thing as durable as it is functional. Surging is a major concern when transporting higher volumes of fluids. The effect that fluid can have on your vehicle as it slams from one side of the tank to the other can be down right dangerous when driving. Our Transfer Tank features 3 stability baffles to decrease the effects of fluid sloshing and surging within the tank during transport.

Product Features:

Protective Black Powder Coat Finish
Heavy-Duty 14-Gauge Steel
Radius Curve Eliminates Weld Pressure Points
3 Stability Baffles And Drain Plug
Mounting Tabs To Secure To The Truck Bed

from

$36.99

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

Saves wear and tear on your engine
Simple installation directly into engine block

from

$35.99

Saves wear and tear on your engine
Simple installation directly into engine block

from

$59.99

The Budge Basic truck cover offers single-layer, basic protection against dust and debris – at a budget friendly price. Lightweight and easy to use, this vehicle cover is perfect for indoor use or occasional outdoor protection. The Budge Basic cover is constructed from a single-layer of polypropylene. This material is fully breathable to prevent mold and mildew. This truck cover is nonabrasive and will not harm your vehicle’s exterior. The Budge Basic cover is light gray in color. This is a suitable indoor and short term outdoor cover for your truck. Cover includes a storage bag and antenna patch. Our covers are available in a variety of sizes that will popular truck makes and models. This truck cover fits full size dually long bed, crew cab trucks 264″ L x 80″ W x 60″ H.

Product Features:

This truck cover fits full size dually long bed, crew cab trucks 264″ L x 80″ W x 60″ H.
This truck cover is suitable for indoor and short term outdoor storage
This pickup truck cover features double stitched seams for added durability
A full elastic hem helps keep the truck cover securely on your vehicle
Will defend against dust, dirt, bird droppings, tree sap and more

from

$49.99

AVS Ventshade(R) is the original AVS product. Offered for many classic vehicles it is the standard that created the side window deflector industry. With a ledge profile, the AVS Ventshade® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Enjoy fresh air and comfort no matter the weather!

Product Features:

Ledge profile that is mounted in the window channel for a secure mount
Keeps rain out and lets fresh air in
Manufactured from high-quality steel
Available in polished stainless and black finishes
Quick and easy installation

from

$50.99

New Goodmark Rear License Plate Bracket

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$209.99

The Rightline Gear Truck Tent lets you experience camping in a dry truck bed, up off the ground, without the complication of tarps, stakes, and guy lines. It features a floorless design that allows you to set up or take down the tent without removing your gear from the bed. The tent is outfitted with (2) gear pockets, a lantern hanging hook, glow-in-the-dark zipper pulls, and a sky view vent. Measure the inside of your truck bed with the tailgate up and check the Truck Tent Sizing Guide. Turn any spot into a comfortable campsite!

Product Features:

Floorless design allows for set up without removing gear from the bed
Protective heavy duty straps and nylon buckles, won’t damage truck’s finish
Color coded poles and pole pockets for quick and easy set up
Water resistant fabric with tape sealed seams (PU 2000mm)
Sky view vent for more light, ventilation, and sleeping under the stars
All truck tents sleep (2) adults
Includes: tent, rainfly, stuff sack, and sewn-in set up guide

from

$49.99

With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!

Product Features:

Precision engineered for a custom fit on your vehicle with modern, curved design
Easy installation with no-drilling or special hardware required
Attaches easily with 3M automotive-grade adhesive above the window
Made from durable, impact-resistant acrylic
Available in dark smoke and chrome finishes

from

$19.99

This Low Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact, lightweight and meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.

from

$251.99

You can never have enough rugged storage. Whether you are storing tools, hauling game day gear, or coming up with literally hundreds of other uses- Dee Zee universal poly plastic chest is like the Swiss Army Knife of utility chests. Constructed of strong yet lightweight plastic with a double wall lid, our universal utility chest can handle all the abuse you can throw at it. We have designed our utility chest to add quick, convenient storage for all sorts of applications. Available in two sizes to suit your needs. We even provided molded drink holders in case you decide to use it on the go and get a little thirsty. Do not worry if the weather does not cooperate, a foam gasket around the lid helps defend your items against the elements.

Product Features:

Classic Raised Brite Tread Pattern
Convenient Molded Cup Holders
Molded Locking Tabs
Double Walled Lid
Double Wall Lid For Extra Support Classic Brite-Tread Pattern
Classic Brite-Tread Pattern
Made In USA

from

$151.99

Classic Raised Brite Tread Pattern
Rigid Frame Resists Warping
Molded Locking Tabs
Poly Plastic Storage Chest Rigid Plastic Frame Resists Warping
Made In USA

Looking for the best GMC C35 aftermarket replacement parts? Replacing worn and broken parts on your GMC C35? Check out our online catalog to find the best selection of aftermarket GMC C35 parts as well as real user reviews on GMC C35 replacement parts. Make an informed decision about every component you add to your C35.

At Advance Auto, we’ve got you covered when it comes to getting your GMC C35 in tip top condition. We’ve got over 3,015 GMC C35 parts to choose from in popular categories like Body Parts, Marine and RV Parts and Transmission Parts. If you’re looking for the best prices, try searching our GMC C35 parts catalog to compare OEM and aftermarket parts for your GMC C35.

Whether you need GMC C35 body parts, interior components, or custom GMC C35 parts you can find them online at Advance Auto. Want to order your Clutch Systems online? Or maybe you need your GMC Automotive Accessories same day? No problem, you can pick up C35 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used GMC C35 parts has never been easier.

Advance Auto customers frequently search for the following types of GMC C35 auto parts. Check out customer reviews and ratings, and compare prices on the following GMC C35 parts:

People also search Advance Auto for these popular years of the GMC C35:

GMC C35 Parts

KAI – B-Pillar/Rocker Panel (Part No.RRP102)

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.124037)

KAI – Fuel Filler Door (Part No.GM1759101)

KAI – Roll Pan (Part No.EFXRP16)

KAI – Fender (Part No.GM1241122)

Dee Zee – Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (Part No.DZ1808TB)

Westin – Diamond Tread Universal Bumper: 350/3500 lb. SAE J684 Certified Capacity (Part No.20000)

KAI – Tailgate Hinge Kit (Part No.GMK414482373L)

Dorman – Help – Interior Door Handle Front Left Black Chrome (Part No.77723)

KAI – Truck Cab Corner (Part No.GMK414448673R)

KAI – Wheel Arch Trim (Part No.GM1791102)

Dee Zee – Powder Coated, Black, Steel, Unlighted, 7"W x 90"L (Part No.DZ15321S)

KAI – Hood Insulation Clip (Part No.GMKHWB2401)

Dee Zee – Mesh, Textured, Black, Aluminum, Used With Cross Bed Tool Box, Curved Design (Part No.DZ95050RTB)

Dorman – Help – Power Window Switch- Front Right & Rear Left/Right, 1 Button (Part No.49245)

KAI – Mirror Assembly: Driver Side, Manual Adjustment, Foldable, 1 Pk (Part No.GM1320111)

KAI – Fender Molding (Part No.GMK4144115732R)

Dorman – Window Regulator hardware Kit – Scissor Type (Part No.702-013)

Dee Zee – Chest, Single Lid, Diamond Tread, Silver, Aluminum, 56" L X 19" W X 16" H (Part No.DZ8556F)

KAI – Truck Floor Support (Part No.GMK4144731733)

Carquest Premium – Door Lock Kit (Part No.DLC1167)

KAI – Fender Patch Panel (Part No.RRP121)

KAI – Window Guide Felt (Part No.GMK4144423771S)

Dorman – Window Regulator: Manual, 1 Pack (Part No.740-650)

KAI – Spare Tire Bracket (Part No.GMK4144967751)

Pro-King – Automatic Transmission Basic Rebuild Kit (Part No.KB-828)

ACDelco – Neutral Safety Switch (Part No.D2219C)

FAG US – CONE (Part No.K387-A)

ATP – AT EXT HOUSING SEAL (Part No.SO-22)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243012)

Carquest Premium – Back Up Light Switch (Part No.SAA4615)

ATP – AT DPSTK TUBE SEAL (Part No.SO-35)

FAG US – SHAFT SEAL (Part No.SS2114)

Driveworks – Oil Seal (Part No.S-6712NA)

Imperial – Transmission Line Fitting Kit (Part No.240390)

ATP – AT CLUTCH PLATE (Part No.JC-50)

Felpro – Manual Transmission Gasket Set (Part No.TS 80161)

ATP – AT SOLENOID SEAL (Part No.JO-15)

ATP – AT SEL SHAFT SEAL (Part No.SO-19)

ARP Auto Racing – For Use With 90 Degree V6 Chevy/ 305, 502 V8 With 1 Piece Rear Seal (Part No.200-2906)

National – Multi Purpose Seal (Part No.240735)

ATP – AT MODULATOR VALVE (Part No.JX-76)

National – Taper Bearing Cone (Part No.LM501349)

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

National – Multi Purpose Seal (Part No.3638)

Hays – Hays Race Tq Convtr Th400 24-2800 Stall (Part No.97-1D24F)

B & M – Kickdown Switch Kit For TH400 Transmission (Part No.20297)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2268)

Energy Suspension – Transmission Mount (Part No.3.1108R)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2378)

LuK – Clutch Release Fork (Part No.LF9801)

Dorman – Help – Flywheel Bolts (Part No.14557)

ATP – M/T FLYWHEEL BOLT (Part No.ZX-2196)

Dorman – Clutch Pilot Bearing/ Bushing (Part No.690-057)

Dorman – Clutch Pilot Bearing/ Bushing (Part No.690-057.1)

ATP – Flywheel Ring Gear (Part No.ZA-500)

Hays – Hays650 Cltch 55-85 GM 6-8Cyl:11In:10Sp (Part No.92-1004)

LuK – Clutch Kit: 11" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.04-049)

Lakewood – Power Train (Part No.RM-922)

ATP – ATP Automatic Transmission Flex Plate (Part No.Z-111)

Lakewood – Trans Adapter-Chevrolet (Part No.77-150)

ATP – FLYWHEEL SHIM (Part No.GS-4)

ATP – ATP Flywheel Shim (Part No.GS-8)

ATP – AT CLUTCH PLATE (Part No.SC-29)

ATP – AT CLUTCH PLATE (Part No.JC-57)

ARP Auto Racing – 3/8" – 16 Thread Size, 180000 Psi Tensile Strength, Hex Style Head Type (Part No.130-2201)

Dorman – Help – Ball Stud Thread Size 13/16-16, Length 1.50 In. (Part No.14556)

Dorman – Help – Clutch Pilot Bushing (Part No.14650)

Dorman – Clutch Pilot Bushing .593 In. x 1.09 In. Type A, Length .750 In. (Sold by each) (Part No.690-014)

National – Multi Purpose Bearing (Part No.614037)

National – Multi Purpose Bearing (Part No.614018)

Hays – Power Train (Part No.70-101)

Driveworks – Clutch Release Bearing (Part No.S-614018)

TrailFX – Heavy Duty Adjustable Truck Ladder Rack with 1500 lb Capacity (Part No.FCLR001B)

TrailFX – Heavy-Duty Adjustable Ladder Rack for Full-Size Trucks (Part No.FCLR002B)

Covercraft – UVS100 Custom Sunscreen – Blue Metallic (Part No.UV10068BL)

Covercraft – UVS100 Custom Sunscreen – Silver (Part No.UV10068SV)

Dee Zee – Diesel,108 Gallon Capacity, Rectangle Shape, 24" L X 48" W X 24"H, Diamond Tread (Part No.DZ91753)

Dee Zee – 40 Gallon Capacity, Narrow Rectangle Shape, 9.7"L X 56"W X 19"H, Black Steel (Part No.DZ92556NSB)