GMC C35 Ignition and Tune-Up Products

This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

• Increased outer hardened layer thickness (RC 55-60)
• Micro Polished Surface For Smooth Contact
• Proprietary formulated ductile iron.
• Melonite QPQ coated reduces friction and initial wear
• Interstitial carbide improves wear resistance/running properties

This strong, billet aluminum distributor is set up for engines that run locked-out timing or an MSD timing computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft while an extra long sintered bushing stabilizes the lower portion. Trigger signals are produced via a high-output magnetic pick-up. This pickup is extremely accurate and never requires adjustment. Since this distributor is designed primarily for race engines, an oversized ( . 006 In.) bronze gear is installed along with an adjustable slip collar for modified blocks, heads or intake manifolds.

Product Features:

• Includes built-in Rev Limiter

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Marine environments place rigorous demands on every component of the ignition system. The combination of water spray, salt exposure, full throttle acceleration and harsh vibrations all take their toll. The MSD Pro-Billet distributor is the strongest and most accurate distributor you can put in your boat. The housing is CNC-machined from a billet of 6061-T6 aluminum creating a housing with no porosity. Each distributor uses MSD’s race-proven magnetic pickup to trigger the ignition control. Mounted just above the pickup is a mechanical advance assembly that is easy to adjust so you can dial-in an ignition curve to match your boat’s application (except PN 8366). For marine use, the distributor cap is bolted to the aluminum base. There are two flame arrestor holes with brass screens machined into the base of the distributor to prevent ignition of gas fumes that may build up in the engine compartment. A special Weathertight connector is supplied. Underwriter’s laboratory approved.

Product Features:

• For Use In Marine Applications w/Chevy V8 Automotive Engines
• Will not accept a vacuum advance canister
• Supplied w/Bolt Down HEI Style Distributor Cap And Rotor
• Weathertight connectors used for locked and sealed connections
• Must Be Used w/An MSD Ignition Control
• O-ring seals can be installed for oil press. control (Mods only)
• Special oil tract improves lubrication to the dist./cam gear
• Nylon pads ensure smooth operation of the advance weights

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Magnet size and strength optimized for precise signal output.
• Precision-wound coated copper windings increase signal output and increase longevity.
• Tailored magnetic circuit programming enhances timing accuracy between the reluctor wheel and circuit output.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

• Custom Fit For Make And Model Listed
• Wires Are Pre-Cut To Exact Specifications
• Bolt-on Performance
• Conductor core features DuPont Kevlar material for increased tensile strength
• Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
• Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

• High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
• The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
• All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
• Offering thousands of high-quality pigtails & sockets for nearly every electrical job
• Noise-suppressing coating on segment prevents electrical interference with radio and other electronic circuits

Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:

• 10-15% More Energy
• Direct Plug In Replacement Direct OE Fit
• Advanced Bobbin Technology
• Highly Specialized Silicone Magnetic Steel Cores
• Standard Motor Products SMP Dr-31
• MSD 8225

Our Chevrolet front drive distributors brought the need for a distributor plug. Both are billet aluminum and feature a slip collar to ensure correct installation depth.

Product Features:

• Use On Engines w/Wet Sump Oil System And Front Drive Dist.
• Supplied w/Bronze Gear
• Must Be Used w/An MSD Crank Trigger
• Adj. slip collar mounting flange for engines w/modified deck hts.
• O-ring seals can be installed for oil press. control (Mods only)
• Special oil tract improves lubrication to the dist./cam gear
• QPQ coated polished steel shaft; guided by sealed ball bearings
• Oversized Polished Steel Shaft w/QPQ Coating

For mounting on non-stock applications, for remote location. Choice of 4 core types. Female and male distributor towers. Terminal crimper and anvil tools. Includes silicone lube, boots and terminals. 20 piece kit.

Product Features:

• 300+Race- 8.8mm Black
• For Race Engine Configurations
• Stainless Steel Spark Plug Terminals
• Suppression of EMI/RFI
• 600 Degree Double Silicone Construction
• Spiral Wound Copper/Nickel Alloy
• Fully Reactive Ferrite Material
• 150 Ohms Resistance

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Unsurpassed quality that you can trust
• Uses leading edge materials
• State-of-the-art manufacturing
• Exacting tolerances
• Meets or exceeds OEM specifications

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• Copper alloy conductors ensure superior electrical conductivity with low resistive losses
• Our parts are 100% tested to verify both mechanical and electrical switching performance
• Robust design and high grade materials meet the stringent demands of today’s service professional
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
• Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
• Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
• Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Fel-Pro Oil Pan SnapUps 8mm bolts
• Designed to hold up the pan and gasket, for one person installation
• Engine$aver Hardware
• Unsurpassed quality you can trust
• Sold in sets of four and are reusable

Chrome Finish

Product Features:

• Edelbrock part No. 4802 hold-down distributor clamp is for 4.3L V6, small-block V8 and big-block V8 Chevys. It is constructed of die-cast zinc with a chrome finish. Kit includes stud, nut and a washer.
• Includes stud, nut, & washer

ACDelco Professional Distributor Cap Cover is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cover is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

• Professional, premium aftermarket replacement
• Provides the performance and dependability you expect from ACDelco
• Manufactured to meet expectations for fit, form, and function

This Radio Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The radio capacitor may also be called a condenser used in electrical devices which may be susceptible to voltage spikes.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Upgrade your vehicle with ZEVO® LED miniature bulbs for added style, performance, and the many benefits of LEDs. Instantly enhance the interior and exterior lighting applications of your vehicle with a modern bright white light for head-turning style and increased visibility by other motorists. Easy-to-install with a robust design and high-quality components, ZEVO replacement bulbs are backed by a limited warranty to provide exceptional performance through the life of the vehicle. Also available in an array of colors to update your car or truck.

Product Features:

• HIGH EFFICIENY: Delivers greater clarity with less power consumption and longer bulb life when compared to standard incandescent bulbs
• RELIABLE: Thermal management to maximize life, matched with robust design that withstands temperature and shock for optimal performance
• NON-POLARITY DESIGN: Plug & play easy installation; SYLVANIA ZEVO LED bulbs light on two sides and can be installed either direction
• INSTANT ON: Provide full brightness instantly, giving drivers around you more time to react, compared to the slower light-up with Incandescent bulbs
• BRIGHT WHITE LIGHT: Ideal for use in Daytime running lights (DRL), back up/reverse, map, dome, trunk, cargo and license plate light bulb replacement
• HYPERFLASH: For some vehicles, installing a load equalizer may be required to eliminate hyper flash or dashboard error messages
• EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
• SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color.
• SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application.
• TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

• 0.6 mm finewire design improves ignitability
• Patented V-trimmed platinum sidewire technology resists wear
• OE equivalent design is engineered for every engine
• Designed for better overall durability with virtually no gap erosion
• Double Iridium-enhanced alloy technology center electrode ensures superior wear resistance for extended performance life.

CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del

Product Features:

• SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
• Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
• 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
• EPDM inner insulation stops power-robbing voltage leaks.
• With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
• Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
• Excellent interference suppression and consistent performance
• Easy lock terminals for more convenient installation.
• Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
• Broad coverage available for most vehicles on the road today
• Include grease pack to ensure easy installation and removal

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

An ACDelco Professional, premium aftermarket Ignition Control Module is a high quality replacement for many vehicles on the road today. It increases voltage in order for the spark plugs to ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Control Module features electronically welded lead connections to help reduce heat stress, failure, or cold joints. This ignition control module has been laser trimmed to provide precise values and reduce deterioration and damage. It includes a copper slug heat sink to help dissipate heat and create a more stable environment and also features a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. This premium aftermarket replacement ignition control module is manufactured to meet your expectations for fit, form, and function.

Product Features:

• Feature electronically welded lead connections to reduce heat stress failure or cold joints
• Laser trimmed to provide precise values and reduce deterioration and damage
• Increase voltage in order for the spark plugs to ignite the air/fuel mixture
• Include a copper slug heat sink to help dissipate heat and create a more stable environment
• Equipped with a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs
• Professional, premium aftermarket replacement
• Manufactured to meet expectations for fit, form, and function to provide the performance and dependability you expect from ACDelco

With the introduction of our 20 Amp extreme HEI module, we needed an HEI cap and rotor that could withstand the high output. The answer was to mold our own HEI cap, rotor and coil cover. The cap and rotor will fit our HEI Pro-Billet distributor, PN 8365.

Product Features:

• Designed w/performance in mind
• High quality; voltage insulating material
• Stainless Terminals
• High dielectric properties

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

• 6.25 in. Diameter
• Absolutely the most accurate way to trigger the ignition.
• The non-magnetic pickup cannot be false triggered.
• Powerful magnets are embedded in a billet aluminum trigger wheel.