1985 Ford Ranger Differentials

Find your specific 1985 Ford Ranger original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1985 Ford Ranger Differentials

from

$49.99

Product Features:

USA Standard Gear heavy-duty cross pin shaft
Fits Dana Spicer 30
Works with Spartan Locker or standard open spider gears

from

$52.99

Product Features:

Fits standard rotation Dana Spicer 30
Chrome

from

$81.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

DANA-35 FORD BRG & SEAL KIT FORD EXPLORER

from

$246.99

Yukon forged yoke for Ford 8.8″ with a 1350 U/joint size (stronger than billet). 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Ford 8.8″
30 spline
1350 u-joint size
Outside snap ring design
3.625″ snap ring span
1.188″ cap diameter
U-bolt style

from

$199.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Ford 7.5″
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.

from

$1898.99

Remanufactured Rear Axle assemblies are completely disassembled and thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed and include backing plates, axle shafts and fluid.

Product Features:

Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio

from

$12.99

Product Features:

Cover gasket
Fits Dana Spicer 30

from

$36.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$6.99

Product Features:

Inner oil slinger for Dana Spicer 25, 27, 30, 44 and 50

from

$35.49

Product Features:

MINI INSTALL KIT FORD 7.5

from

$199.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits AMC Model 35 IFS
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$5.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$23.99

Product Features:

Brand may vary by location

from

$59.99

Product Features:

Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
Interlocking design makes installation much easier

from

$9.99

Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.

Product Features:

Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
0.480″ tall

from

$37.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$159.99

Product Features:

INTERNALS FORD 7.5

from

$5.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$11.99

Pinion gear thrust washer (0.875″ shaft) for 8.8″ Ford.

Product Features:

Pinion gear thrust washer for Ford 8.8″
0.875″ diameter cross pin shaft applications only

from

$8.99

Pinion seal for 7.5″, 8.8″, and 9.75″ Ford, and also 1985-’86 9″ Ford.Yukon Mighty seal.

Product Features:

Pinion seal
Fits Ford 7.5″, 8.8″ and some 9.75″
2.785″ O.D.

from

$123.99

Product Features:

CLUTCH PACK KIT 8.8″ FORD 1 KIT PER UNIT

from

$16.79

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$6.99

Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

Product Features:

Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS

from

$187.99

Product Features:

DANA-35 R/P 3.55 RATIO

from

$9.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$215.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits M802011 race
All steel construction

from

$1.99

Product Features:

Ford 7.5″, 8.8″ Ring Gear Bolt

from

$3.99

Replacement ring gear bolt for Model 20, Grand Cherokee 35, “Super” Dana 30 & Dana 50. 7/16″ x 20.

Product Features:

Ring gear bolt for AMC Model 20, “Super” 35, Dana Spicer “Super” 30 and Dana Spicer 50
7/16″ 20 thread

Popular 1985 Ford Ranger Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Rear Differential Pinion Bearings

Differential Carrier Bearings

Differential Lock Springs

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Differential Seals

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Pinion Shaft Seals

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Auxiliary Shaft Bearings

Differential Spider and Pinion Gear Kits

Differential Pinion Bearing Spacers

Maybe you’re in the middle of a full rebuild of that 1985 Ford Ranger. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 133 different Differentials in our inventory ranging from $0.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1985 Ford Ranger running smoothly.

Differentials are only as good as their brand. We stock 19 different brands to make sure you have plenty of trusted parts to choose from for your 1985 Ford Ranger. FELPRO, Dorman, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1985 Ford Ranger, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 873 reviews in this category, some of the top rated parts include Differential Shaft Lock Bolt with 4.0 stars and Bearings with 3.9 stars.

So if you’re in the market for aftermarket Differentials to keep your 1985 Ford Ranger rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1985 Ford Ranger Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1985 Ford Ranger demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Ranger the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Powertrax Differentials

We carry Powertrax parts in our stock across Complete Differentials categories, plus more. For a 1985 Ford Ranger, our most popular Powertrax Differentials include:

from $444.99

(1)

Lock Right Locker

Complete Differentials

Top 1985 Ford Ranger Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1985 Ford Ranger. Popular Felpro parts include:

from $14.99

(121)

Differential Cover Gasket

Rear Differential Cover Gaskets

from $6.49

(13)

Differential Cover Gasket

Rear Differential Cover Gaskets

FAQs for 1985 Ford Ranger Differentials

What are the most purchased Differentials for the 1985 Ford Ranger?

Out of 133 Differentials for the 1985 Ford Ranger, the most popular in our inventory are:

from $13.99

(14)

Tapered Cone/Cup Wheel Bearing Set

Front Differential Pinion Bearings

from $34.99

(34)

Rear Differential Cover

Differential Covers

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

What are the top-rated 1985 Ford Ranger Differentials?

Top-rated Differentials for your 1985 Ford Ranger based on customer reviews/ratings are:

from $5.99

(11)

Differential Shaft Lock Bolt

“great”

from $23.99

(7)

Bearings

“Good price”

from $169.99

(4)

Wheel Bearing and Seal Kit

“Complete kit with for my rebuild. I was lucky to get awesome service from the salesman. Parts were very reasonable price-wise.”

1985 Ford Ranger Differentials

More 1985 Ford Ranger Differentials

Essential 1985 Ford Ranger Differentials

USA Standard Gear – Spartan Locker Replacement Cross Pin For Dana 30 (Part No.17016)

Yukon Gear – Replacement Chrome Cover For Dana 30 Standard Rotation (Part No.32003)

Motive Gear – Differential Bearing Kit – Koyo (Part No.R35FR)

Yukon Gear – Forged Yoke For Ford 8.8" With A 1350 U/Joint Size (Part No.41051)

USA Standard Gear – Master Overhaul Kit for the Ford 7.5 Differential (Part No.37027)

Spartan – Drive Axle Assembly; Ford Ranger 99-09 Lockup Axle (Part No.RAXP1931K)

Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)

Sealed Power – Engine Auxiliary Shaft Bearing Set (Part No.1881M)

Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)

Motive Gear – Differential Gear Install Kit (Part No.F7.5IK)

Yukon Gear – Pinion Install Kit For Model 35 IFS Differential For Explorer And Ranger (Part No.13084)

Pro-King – Differential Pinion Shim Kit (Part No.742G202)

Driveworks – Camshaft Seal (Part No.S-99139)

Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)

Yukon Gear – Crush Sleeve (Part No.33085)

National – Shaft Repair Sleeve (Part No.99157)

Motive Gear – Differential Carrier Gear Kit (Part No.F7.5BI)

Pro-King – Differential Pinion Nut (Part No.764A961)

Yukon Gear – Pinion Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33299)

Yukon Gear – Pinion Seal For 7.5", 8.8", And 9.75" Ford, And Also 1985-’86 9" Ford (Part No.30037)

Motive Gear – Differential Clutch Pack (Part No.F8.8CPK)

Pro-King – Differential Axle Bearing (Part No.742G280)

Yukon Gear – Cross Pin Bolt (Part No.33067)

Motive Gear – Differential Ring and Pinion (Part No.D35-355)

National – Bearings (Part No.M86610)

Yukon Gear – Bearing Race Driver (Part No.56020)

Motive Gear – Ring Gear Bolt (Part No.D5AZ4216A)

Yukon Gear – Replacement Ring Gear Bolt For Model 20, Grand Cherokee 35, "Super" Dana 30 & Dana 50 – 7/16" X 20 (Part No.33040)

Popular 1985 Ford Ranger Differentials Categories