Ford Ranger Trailer Hitches

A CURT trailer hitch is the key to pursuing your passions, whether you’re taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Ford Ranger, Mazda B2300, B3000 and B4000 (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4″ x 1-1/4″ hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4″ trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.

Product Features:

• Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• 1-1/4″ x 1-1/4″ ball mount features a 3/4″ hole to accept a trailer ball shank
• Ball mount can be flipped to provide drop or rise for level towing
• Made in USA (may include imported hardware)

Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Mazda B2300, B3000, B4000 and Ford Ranger (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:

• Rated to 4,000 lbs. gross trailer weight and 400 lbs. tongue weight
• Compatible with weight distribution hitch (6,000 lbs. WD / 600 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)

Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
• Strongest And Easy Installation

The stylish and innovative design of these steps add to a vehicle rugged off road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
• Strongest And Easy Installation

The stylish and innovative design of these steps add to a vehicle rugged off road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
• Strongest And Easy Installation

Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery

Product Features:

• For Vehicles w/Independent Bulb Turn Signals/Common Bulb System
• Protects Tow Vehicle Electronics And Itself From Wiring Shorts
• Self-Resetting
• Includes 12 Ga. Power Lead Wire
• Includes Fuse/Fuse Assembly/Splices/Cable Ties
• Powers Up To 8.0 Amps Per Output
• Receives Power Directly From The Battery
• Includes Vehicle Side 4 Flat
• Includes Dust Cover And Grease Packet To Prevent Corrosion

Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.

Product Features:

• 60 in. Long
• Adapts Tow Vehicles Taillight System To The Trailers
• Powers Up To 2.1 Amps Per Output
• Double-Molded Weatherproof Design; Includes Dust Cover
• Corrosion Resistant Terminals
• Includes Splices And Terminal Grease
• Complete With Splices And Circuit Tester

It does not matter what you haul, you need to make sure to secure it properly in order to protect your truck, yourself and other motorists. Dee Zee Cab Rack Tie Downs offer a reliable method for securing your cargo to your cab rack. Designed to fit into your cab rack integrated channel, our Tie Downs glide along your rack accessory channel tightening into place for virtually endless possibilities.

Product Features:

• Tie Down Anchor For Cargo
• Cast Aluminum Finish
• Fits Into Integrated Channel In Cab Rack
• No Drilling Required

When a custom hitch is not available for your vehicle, CURT offers the multi-fit hitch. Designed to be the ultimate in versatility, CURT universal trailer hitches fit several different vehicle manufacturers, including Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, Nissan, Oldsmobile, Plymouth, Pontiac and Toyota. The multi-fit hitch is a universally designed alternative to our custom hitches. It provides a more affordable option and flexibility in installation. Very simply, a CURT multi-fit trailer hitch uses a sliding or adjustable frame to match the width of your vehicle’s frame. In general, multi-fit hitches are used on mid-size and full-size pickup trucks and SUVs. This class 2 multi-fit trailer hitch features a gross trailer weight capacity of 3,500 lbs., a tongue weight capacity of 350 lbs. and a 1-1/4″ x 1-1/4″ receiver tube opening, making it an excellent choice for towing smaller utility trailers, boat trailers and popup campers, as well as cargo carriers and bike racks (NOTE: Never exceed the lowest weight capacity of any towing component). It comes with mounting hardware and instructions, and typically requires little or no drilling during installation.

Product Features:

• Features an adjustable frame to fit a variety of vehicles
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Requires little or no drilling on most models
• Protected by a durable high-gloss black powder coat finish
• Equipped with an open-back receiver for easy cleaning

Husky offers a full line of unique hitch models to provide a custom fit for nearly every vehicle on the road today. Husky receiver hitches are engineered and rigorously tested to SAE J684 standards for safety. Each hitch is protected inside and out with an industry-leading, rust-resistant finish.

Product Features:

• Manufactured With A Vehicle-Specific Design For A Custom Fit
• Precisely-Welded For Superior Strength And Fit
• Co-Cured In A Rust-Resistant Liquid Bonderite (R) Coating
• Strengthened With A Welded, Seamless Collar
• Open-Back Receiver For Easy Cleaning

Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Mazda B2300, B3000, B4000 and Ford Ranger (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:

• Rated to 4,000 lbs. gross trailer weight and 400 lbs. tongue weight
• Compatible with weight distribution hitch (6,000 lbs. WD / 600 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)

Add light mounts to your Dee Zee Aluminum or Steel Headache Rack or Rear Rack. With these convenient mounts that slide into the built in channel system, mounting your auxiliary lights is quick and easy. Several size options to meet your needs.

Product Features:

• Made From Rugged Steel
• Protective Gloss Black Powder Coat Finish
• Utilize The Accessory Channel On Aluminum Cab Racks
• Several Size Options To Meet Your Needs
• Made In USA