from

$34.99

This PCV valve diaphragm is designed to match the fit and function of the original diaphragm on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Cost-effective fix – this PCV valve diaphragm allows the failure-prone part to be replaced instead of disconnecting and replacing the expensive oil separator
Simple repair – this PCV valve diaphragm directly replaces just the original diaphragm on specific Ford trucks without requiring a complete assembly replacement
Direct replacement – this PCV valve diaphragm is designed to match the fit and function of the original diaphragm on specific Ford Super Duty trucks with a diesel engine
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$17.99

This PCV valve elbow is designed to match the fit and function of the original elbow on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this PCV valve elbow is designed to match the fit and function of the original elbow on specified vehicles.
Restores functionality – reliable replacement for an original elbow that is leaking or has failed due to heat and fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$25.99

Replacement original equipment transmission filters remove contaminants from the fluid, to help the transmission operate as designed. Motorcraft® Automatic Transmission Filters are designed, engineered and tested to help ensure peak transmission performance throughout the life of the filter. Filtration and hydraulic performance testing is performed according to procedures approved by the International Organization for Standardization (ISO) FT-180 © 2021 Ford Motor Company OM-PRJ-1912-0072 Motorcraft® is a registered trademark of Ford Motor Company Filter bypass screen

Product Features:

Each original equipment filter meets the specific needs of its application and intended service life
Filtration efficiency is fine tuned to match each transmission’s fluid cleanliness requirements to help ensure transmission durability throughout the intended life cycle
Original equipment Filters are engineered to maintain fluid flow rates even as wear debris accumulates
Filter housings are constructed from advanced fiber reinforced temperature-resistant polymers or a combination of polymers and stamped steel
Filtration and hydraulic performance testing is performed according to procedures approved by the International Organization for Standardization (ISO) FT-180 © 2021 Ford Motor Company OM-PRJ-1912-0072 Motorcraft® is a registered trademark of Ford Motor Co

from

$36.99

Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.

Product Features:

Guaranteed OE quality form, fit and function
Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.

from

$200.19

Crankcase Gasket Set

from

$28.49

This fuel filter cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel filter cap is designed to match the fit and function of the original cap on specified vehicles.
Restores functionality – reliable replacement for an original cap that is missing or failed due to wear.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$47.99

This fuel filter cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel filter cap is designed to match the fit and function of the original cap on specified vehicles.
Restores functionality – reliable replacement for an original cap that is missing or failed due to wear.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.99

This fuel water separator drain valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel water separator drain valve is designed to match the fit and function of the original valve on specified vehicles.
Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$118.99

Water in fuel is like a contaminant. It can erode the surfaces of orifices in precision injectors and cause corrosion in fuel systems. Fram Fuel Filter / Water Separators are specially designed to strip droplets of emulsified water from fuel and contain it in a reservoir at the bottom of the filter.

Product Features:

High durability and reliable performance
Excellent dirt-holding capacity
Low flow restriction

from

$33.99

This air filter housing clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this air filter housing clamp is designed to match the fit and function of the original clamp on specified vehicles.
Restores functionality – this clamp is made to fit and fully restore part functionality after the original clamp fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.99

FRAM Drive is the perfect oil filter for everyday driver. Designed with OE grade synthetic blend media and compatible with both conventional and synthetic oil types, FRAM Drive keeps engine protected for up to 7,500 miles (12,000 kilometers). FRAM Drive is engineered to withstand high temperatures and endure working pressures common in todays engines.

Product Features:

Proven protection for up to 7,500 miles
Engineered for use with synthetic or conventional motor oil
Precision Relief Valve provides consistent oil flow, even in cold conditions
Designed for everyday drivers who perform oil changes at OE (original equipment) recommended intervals

from

$11.39

FRAM Extra Guard® engine air filters are engineered to protect your engine from harmful contaminants. Replacing an air filter with FRAM Extra Guard can help improve horsepower, acceleration, and engine performance. To prevent engine wear, FRAM recommends changing your air filter every 12 months.

Product Features:

Keep your engine running smoothly by preventing damaging particles from entering your vehicle’s engine
Ensures maximum airflow to prevent engine wear
Installs quickly in as little as 5 minutes
Protects up to 12 months or 12,000 miles

from

$2.29

These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:

Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components.
Restores functionality – built to restore a proper seal
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$7.99

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$66.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$51.99

This fuel water separator drain valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel water separator drain valve is designed to match the fit and function of the original valve on specified vehicles.
Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.79

CARQUEST cabin air filters are engineered to capture dirt, dust, and allergens that enter the vehicle¿s ventilation system, keeping the air in the cabin clean. Each cabin air filter is designed to meet form, fit and function characteristics for your vehicle.

Product Features:

Traps dirt, dust, particulates and allergens for cleaner air inside the vehicle
Helps keep HVAC system components working at peak condition
Recommended 1-year change interval
Balance of performance and affordability

from

$90.99

FUEL FILTER

from

$51.99

Dorman’s Engine Oil Filter Housing Return Tube allows oil to flow smoothly through the filter housing back to the vehicle’s engine. This direct-replacement oil filter tube restores proper oil filtration, therefore protecting the engine against damage. As an added bonus, Dorman’s Engine Oil Filter Housing Return Tube is available as a complete kit, including all necessary components for a complete and convenient repair.

Product Features:

Direct replacement for a proper fit every time.
Replacement will prevent damage to vehicle engine.
Includes all necessary hardware and gaskets for a complete installation
Dorman Fuel Filter Caps also available, sold separately

from

$24.49

Original Equipment Engine Air Filter: Standard Duty, Manufactured To Meet Ford’s Standards

from

$19.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$15.49

Carquest Standard oil filters are designed to meet the original equipment (O.E.) specifications and the requirements for maintaining new vehicle warranties. Our oil filters use nitrile sealing gaskets and solid steel baseplates to prevent oil leaks. Carquest Standard oil filters feature cellulose media for increased efficiency at capturing dirt and debris. Each Carquest Standard oil filter is built with rugged components for durability and utilizes multifiber, high-density media for optimal engine protection up to 5,000 miles.

Product Features:

Protection for up to 5,000 miles
Cellulose media provides 95.1% efficiency at 20 Microns for increased engine protection
Nitrile anti-drain back valve for engine start-up protection
Lathe cut nitrile sealing gasket prevents leaks
Double fluted spiral wound center tube allows maximum flow and provides additional strength
Solid steel baseplate provides additional strength to resist leakage
Meets requirements for maintaining new vehicle warranties

from

$139.99

This engine crankcase breather element is designed to match the fit and function of the original filter on specified vehicles. It is engineered to restore proper breather performance when a breather filter is missing, cracked, or clogged.

Product Features:

Direct replacement – this engine crankcase breather element is designed to match the fit and function of the original filter on specified vehicles.
ideal solution – engineered to restore proper breather performance when a breather filter is missing, cracked, or clogged.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$48.49

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes