Ford F-250 Super Duty Gauges

Ultra high pressures in modern direct injected diesel applications require precise monitoring to assure the longevity and power output of your engine. Using AutoMeter’s advanced Digital Stepper Motor Drive, this gauge provide the most accurate possible reading, professional grade reliability and smooth pointer movement. Connects directly to your factory sensor with an included wiring harness.

Product Features:

• Traditional incandescent lighting illuminates around the perimeter of the dial
• Gauge kit includes wiring harness, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
• Included wiring harness connects to original equipment High Pressure Oil Pump sensor wiring.
• For use with 1994-2003 7.3L and 2003-2007 6.0L Ford Powerstroke Engines ONLY
• AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy while keeping hazardous fluids outside of the vehicle
• The accuracy of digital stepper motor gauges is further increased by utilizing a self calibration sequence during power up
• 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system

Ultra high pressures in modern direct injected diesel applications require precise monitoring to assure the longevity and power output of your engine. Using AutoMeter’s advanced Digital Stepper Motor Drive, this gauge provide the most accurate possible reading, professional grade reliability and smooth pointer movement. Connects directly to your factory sensor with an included wiring harness.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• Gauge kit includes wiring harness, mounting hardware, and detailed instructions for installation
• Included wiring harness connects to original equipment High Pressure Oil Pump sensor wiring.
• For use with 1994-2003 7.3L and 2003-2007 6.0L Ford Powerstroke Engines ONLY
• AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy while keeping hazardous fluids outside of the vehicle
• The accuracy of digital stepper motor gauges is further increased by utilizing a self calibration sequence during power up
• 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system

If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy Spectrum allows you to re-program for correct speedometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).

Product Features:

• Speedometer correction for multiple tire sizes
• Adjustable tire size/gear ratio change
• Return back to factory settings
• Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
• Internet updateable

Hypertech’s In-line Speedometer Calibrator Module is an in-line module to correct the speedometer and odometer for non-stock tire sizes and/or rear gear ratios. This module is perfect for vehicles with computers that don’t allow for tire size and/or rear gear ratio correction or re-calibrate for tire sizes and/or rear gear ratios outside the range of programmers. If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Speedometer Calibrator allows you to correct speedometer and odometer readings. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the speedometer readings will not be accurate (as required by law). Using the USB cable connect, the In-line Speedometer Calibrator Module to your PC and enter the new tire height and/or rear gear ratio. There are no limitations for increasing tire height or rear gear ratios. Next, disconnect the factory connector to the instrument cluster (behind the dash), snap in the Speedometer Calibrator Module, reconnect the cluster, and you’re done! In a matter of minutes, you can accurately correct your speedometer and odometer readings (as required by law).

Product Features:

• Perfect for vehicles with computers that don’t allow for tire size and/or rear gear ratio correction or re-calibrate for tire sizes and/or rear gear ratios outside the range of programmers.
• Inline speedometer correction device installs easily to the factory wiring harness
• Use to recalibrate after tire/gear change
• Return back to factory settings
• Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
• Internet updateable
• Product might not be available in all states due to local laws.

AutoMeter has brought together the most popular diesel gauges into a complete, ready to install pillar kit. The kit includes a pyrometer (EGT), boost gauge, and gauge pillar mount.

Product Features:

• Kit includes bulb and socket assemblies with red and green bulb covers

AutoMeter has brought together the most popular diesel gauges into a complete, ready to install pillar kit. The kit includes a pyrometer (EGT), boost, transmission temperature gauge, and gauge pillar mount.

Product Features:

• Kit includes bulb and socket assemblies with red and green bulb covers

AutoMeter has brought together the most popular gauge and pillar for towing and heavy duty truck use into a complete, ready to install pillar kit. The kit includes a transmission temperature gauge and gauge pillar mount.

Product Features:

• Kit includes bulb and socket assembly with red and green bulb covers

This odometer drive gear is designed to match the fit and function of the original gear on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this odometer drive gear is designed to match the fit and function of the original gear on specified vehicles, and is engineered for durability and reliable performance
• Restores functionality – reliable replacement for an original part that has failed due to gear stripping
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Watching your precise exhaust temperature can mean the difference between maximum performance and catastrophic engine damage. On high output diesel or forced induction applications, there are few gauges that are more critical. AutoMeter’s Digital Stepper Motor display combined with our high definition LED backlighting make viewing your exact exhaust temperature effortless. The included Type K thermocouple assures maximum accuracy and minimum response time. There is, quite simply, not a better measurement of your exact exhaust gas temperature available anywhere, for any price. A variety of included installation options and direct plug in harness simplify installation on any application.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• The included Type K thermocouple assures maximum accuracy and minimum response time
• AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy which is further increased by utilizing a self calibration sequence during power up
• Gauge kit includes Type-K Thermocouple, wiring harness, thermocouple mounting kit, mounting hardware, and detailed instructions for installation
• 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system

Watching your precise exhaust temperature can mean the difference between maximum performance and catastrophic engine damage. On high output diesel or forced induction applications, there are few gauges that are more critical. AutoMeter’s Digital Stepper Motor display combined with our high definition LED backlighting make viewing your exact exhaust temperature effortless. The included Type K thermocouple assures maximum accuracy and minimum response time. There is, quite simply, not a better measurement of your exact exhaust gas temperature available anywhere, for any price. A variety of included installation options and direct plug in harness simplify installation on any application.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• The included Type K thermocouple assures maximum accuracy and minimum response time
• AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy which is further increased by utilizing a self calibration sequence during power up
• Gauge kit includes Type-K Thermocouple, wiring harness, thermocouple mounting kit, mounting hardware, and detailed instructions for installation
• 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system

AutoMeter steering column gauge mounts (pod) are covers that install over the top of your vehicle’s factory steering column shroud, providing a clean and convenient location to install an additional 2 1/16″ gauge or two in the driver’s field of vision. These products are vehicle-specific fitment to ensure proper fit and finish and are molded from durable ABS composite material with a black textured finish which can be painted to match your interior trim if desired.

Product Features:

• Clean OEM-like fit and finish – Gauges do not obstruct the driver’s view of the factory cluster and are positioned at optimum viewing angles for at-a-glance readings
• Seamlessly integrate 2-1/16″ AutoMeter gauges into your interior
• Attaches to the factory column cover for easy installation and includes required mounting hardware
• A great addition or alternative to the traditional A-pillar gauge mount
• For models equipped with Manual Transmission Only
• Paint-To-Match
• High quality, composite construction is incredibly durable and looks great

AutoMeter steering column gauge mounts (pod) are covers that install over the top of your vehicle’s factory steering column shroud, providing a clean and convenient location to install an additional 2 1/16″ gauge or two in the driver’s field of vision. These products are vehicle-specific fitment to ensure proper fit and finish and are molded from durable ABS composite material with a black textured finish which can be painted to match your interior trim if desired.

Product Features:

• Clean OEM-like fit and finish – Gauges do not obstruct the driver’s view of the factory cluster and are positioned at optimum viewing angles for at-a-glance readings
• Seamlessly integrate 2-1/16″ AutoMeter gauges into your interior
• Attaches to the factory column cover for easy installation and includes required mounting hardware
• A great addition or alternative to the traditional A-pillar gauge mount
• For models equipped with Automatic Transmission Only
• Paint-To-Match
• High quality, composite construction is incredibly durable and looks great

Product Features:

• Clean OEM-like fit and finish – Gauges do not obstruct the driver’s view of the road and are positioned at optimum viewing angles for at-a-glance readings
• For use with 2-1/16″ AutoMeter gauges
• Paint-To-Match
• Includes required mounting hardware

Mechanical boost gauges have become the staple in boost pressure monitoring for all types of engines, gasoline, diesel, or otherwise. Ultra-precise bourdon tube meter movement ensures accuracy and durability not seen anywhere else in the industry. A simple 1/8″ NPT pressure connection requires no electrical hookup for operation. Includes 1/8″ NPT fittings and nylon line kit.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• AutoMeter’s race proven mechanical instruments provide trusted accuracy while being simple to install
• No electrical system required for gauge operation – compatible with every street or race vehicle
• Mechanical movements provide accuracy and durability even in the harshest environments
• Gauge kit includes 1/8″ nylon line, 1/8″ NPT compression fittings, 1/4″ NPT adapter, mounting hardware, and detailed instructions for installation

Mechanical boost gauges have become the staple in boost pressure monitoring for all types of engines, gasoline, diesel, or otherwise. Ultra-precise bourdon tube meter movement ensures accuracy and durability not seen anywhere else in the industry. A simple 1/8″ NPT pressure connection requires no electrical hookup for operation. Includes 1/8″ NPT fittings and nylon line kit.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• AutoMeter’s race proven mechanical instruments provide trusted accuracy while being simple to install
• No electrical system required for gauge operation – compatible with every street or race vehicle
• Mechanical movements provide accuracy and durability even in the harshest environments
• Gauge kit includes 1/8″ nylon line, 1/8″ NPT compression fittings, 1/4″ NPT adapter, mounting hardware, and detailed instructions for installation

Transmission fluid temperature is the single biggest contributing factor to the lifespan of your automatic transmission. Having an accurate, realtime measurement allows you to know when to downshift or when to take your foot out of it. Whether you’re towing or simply trying to harness the power of a built or boosted motor, AutoMeter’s Digital Stepper Motor Trans Temp Gauge will give you the most accurate possible measurement for the exact temp of your trans fluid. AutoMeter’s most advanced 1/8″ NPT temperature transducer is included as well as a direct plug in wiring harness for ease of installation. An optional trans cooler line manifold is available for another easy installation option.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• Gauge kit includes 1/8″ NPT temperature sender, 3/8″ and 1/2″ NPT adapters, wiring harness, mounting hardware, and detailed instructions for installation
• Includes data acquisition grade temperature sender, providing unmatched accuracy and durability even in the harshest environments
• AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy while keeping hazardous fluids outside of the vehicle
• The accuracy of digital stepper motor gauges is further increased by utilizing a self calibration sequence during power up

Transmission fluid temperature is the single biggest contributing factor to the lifespan of your automatic transmission. Having an accurate, realtime measurement allows you to know when to downshift or when to take your foot out of it. Whether you’re towing or simply trying to harness the power of a built or boosted motor, AutoMeter’s Trans Temp Gauge will give you the most accurate possible measurement for the exact temp of your trans fluid. A single wire 1/8″ NPT temperature sender included to be installed in your transmission, transmission pan or with an optional transmission cooler line manifold is available for easy installation into a transmission cooler hard line.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• 12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
• Gauge kit includes 1/8″ NPT temperature sender, 3/8″ and 1/2″ NPT adapters, mounting hardware, and detailed instructions for installation
• AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle

Product Features:

• Clean OEM-like fit and finish – Gauges do not obstruct the driver’s view of the road and are positioned at optimum viewing angles for at-a-glance readings
• For use with 2-1/16″ AutoMeter gauges
• Paint-To-Match
• Includes required mounting hardware