Fiat 124 Filters and PCVs

Carquest Premium engine air filters are designed to meet OE fit, form and function for optimal filtration and engine protection. High-quality paper, enhanced bonding, and reinforced metal screen backing give Carquest Premium air filters the added strength and durability that modern engines demand. Built to meet or exceed original equipment standards, Carquest Premium air filters provide exceptional engine protection and optimal performance in all driving conditions.

Carquest Premium engine air filters are designed to meet OE fit, form and function for optimal filtration and engine protection. High-quality paper, enhanced bonding, and reinforced metal screen backing give Carquest Premium air filters the added strength and durability that modern engines demand. Built to meet or exceed original equipment standards, Carquest Premium air filters provide exceptional engine protection and optimal performance in all driving conditions.

Blocks dust, dirt, bacteria and pollution that can interrupt engine performance. Designed to offer consistent air flow to help increase horsepower and acceleration

Product Features:

• Prescription filtration provides stronger resistance against moisture and collapse from rain and snow
• Optimum pleat count provides a higher filtration function
• Superior protection for vehicles in dusty or dirty environments, snow, high heat/humidity and frequent trips less than 10 miles

To achieve optimum performance, combustion engines require clean intake air. If pollutants in the air, such as soot or dust, get into the combustion chamber, pitting may occur on the cylinder heads, causing premature wear of the engine. The function of electronic parts located between the suction and the combustion chamber may also be significantly impaired. MANN-FILTER air filters are the end of the road for all dirt particles. No matter whether it’s dust, pollen, sand, soot or even water droplets – thanks to the highest degree of dirt separation and high mechanical stability, MANN-FILTER air filters filter even the smallest particles out of the intake air. This enables an optimum composition of the fuel-air ratio and ensures that the engine performance is consistent. In order to guarantee performance, air filters must be checked regularly, as a blocked filter will impede the air supply to the engine. The possible consequence of this is: the fuel may not be completely burned and may in part be discarded without being used.

Product Features:

• Highest degree of dirt separation and high mechanical stability
• Perfectly adapted in form and function to the widest possible range of installation situations
• Filter even the smallest particles out of the intake air
• Enables an optimum composition of the fuel-air ratio and ensures that the engine performance is consistent
• High dust holding capacity ensures reliability throughout the entire service interval

Constructed with 100-percent polyurethane boxed frame, this high flow, oiled OE replacement performance filter will outflow the stock filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

Product Features:

• Pre-oiled
• Rounded Open Pleats
• Progressive Bump Seal
• Full Urethane Housing

AUTO TRANS FLTR KT

Provides OE-quality filtration. Sure Hold gaskets are designed to keep your pan gasket in place during installation. Includes trilingual instructions.

AT FLTR 5/16 D BARB

Built to meet or exceed OE specifations for long-lasting engine protection

Product Features:

• Meets all new car warranty requirements
• Greater capacity to meet extended drain interval requirements
• 99% filtration efficiency at 30 microns
• OE synthetic blend media for engine protection up to 10,000 miles
• Precision bypass valve ensures optimal oil flow
• Durable silicone ant-drain back valve for engine start up protection
• Internally lubricated seal gasket
• Metal end caps and leaf spring provide structural integrity
• Engineered for use with premium conventional or synthetic oil

An ACDelco Professional, premium aftermarket E Oil Filter features a revolutionary design allowing the engine oil filter to function better while being lighter and more easily recycled than traditional filters. This filter fits your GM vehicle, as well as a wide range of other vehicles on the road today. Its unique element design yields more filtering area in a smaller canister. New thermal bonding techniques and non-metallic end caps improve the overall seal as well as remove wasted media rendered non-functional by adhesives used in traditional filters. This can represent as much as 15% of the total media capacity. This premium aftermarket replacement E oil filter is manufactured to meet your expectations for fit, form, and function.

Product Features:

• Is 20-25% smaller in size, yet has more filtration media for greater capacity
• Has 10 times more open area in the core for improved flow
• Has a steel shell, threaded plate assembly, and leaf spring that can all be recycled
• Has a non-metallic cartridge that can be crushed to remove oil and can then be used as an energy source
• Has a lubricity gasket for reduced installation torque
• Has a full cover baseplate for easy installation in blind applications
• Has a nylon core for higher strength and better flow characteristics
• No metallic components on ‘clean side’ of filter media, therefore eliminating possible metallic contamination
• Injection molded nylon core increases the structural strength to almost twice that of a traditional metal core
• Synthetic end caps are ultrasonically welded to prevent media blocked by adhesives used in traditional filters

Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.

Product Features:

• Protection for up to 10,000 miles
• Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
• Solid metal end caps are designed to be long lasting
• Silicone anti-drain back valve for engine start-up protection
• Heavy-duty steel baseplate provides additional strength to resist leakage
• Heavy gauge steel canister withstands high pressure operating conditions
• Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
• Meets requirements for maintaining new vehicle warranties

Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Contains Anti-Drainback Valve;8 PSID Front-End By-Pass Valve
• High efficiency and durable cellulose/synthetic blended media for longer drain intervals
• Silicone anti-drainback valve has 3X the durability verses nitrile for engine start-up protection
• Metal end caps
• Internally lubricated gasket
• Precision coil spring relief valve

Carquest Standard oil filters are designed to meet the original equipment (O.E.) specifications and the requirements for maintaining new vehicle warranties. Our oil filters use nitrile sealing gaskets and solid steel baseplates to prevent oil leaks. Carquest Standard oil filters feature cellulose media for increased efficiency at capturing dirt and debris. Each Carquest Standard oil filter is built with rugged components for durability and utilizes multifiber, high-density media for optimal engine protection up to 5,000 miles.

Product Features:

• Protection for up to 5,000 miles
• Cellulose media provides 95.1% efficiency at 20 Microns for increased engine protection
• Nitrile anti-drain back valve for engine start-up protection
• Lathe cut nitrile sealing gasket prevents leaks
• Double fluted spiral wound center tube allows maximum flow and provides additional strength
• Solid steel baseplate provides additional strength to resist leakage
• Meets requirements for maintaining new vehicle warranties

Fuel Filter

Product Features:

• Helps prevents dirt, rust, and other fuel contaminants from entering the fuel delivery system
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

CARQUEST offers high quality, high efficiency fuel filters for automotive, medium and heavy trucks as well as farm, construction, mining and other equipment applications.

Product Features:

• Keeps dirt, debris and contaminants from clogging fuel lines and causing erratic, unstable fuel performance
• Manufactured to a strict quality standards with 98% efficiency at a 10 micron rating.
• Provides maximum fuel system protection.
• Designed to meet or exceed Original Equipment specifications
• Protects the injectors from debris that cause damage and clogging.
• Provides less restriction preventing the fuel pump from working too hard.
• Superior materials, design and construction ensure CARQUEST fuel filters provide excellent performance under all types of operating conditions.

A clogged fuel filter could lead to contaminants in the engine fluid – a common source of engine system failures. Protect fuel pumps and fuel injectors from these costly malfunctions. A Purolator® Fuel Filter scrubs fuel clean of dirt, rust and other contaminants for smooth and efficient engine performance.

Product Features:

• Removes water from the fuel system
• Prevents rust and corrosion in your engine
• Keeps fuel contaminant free
• Replace annually for peak performance
• Meets or exceeds OE specifications

CARQUEST offers high quality, high efficiency fuel filters for automotive, medium and heavy trucks as well as farm, construction, mining and other equipment applications.

Product Features:

• Keeps dirt, debris and contaminants from clogging fuel lines and causing erratic, unstable fuel performance
• Manufactured to a strict quality standards with 98% efficiency at a 10 micron rating.
• Provides maximum fuel system protection.
• Designed to meet or exceed Original Equipment specifications
• Protects the injectors from debris that cause damage and clogging.
• Provides less restriction preventing the fuel pump from working too hard.
• Superior materials, design and construction ensure CARQUEST fuel filters provide excellent performance under all types of operating conditions.

A clogged fuel filter could lead to contaminants in the engine fluid – a common source of engine system failures. Protect fuel pumps and fuel injectors from these costly malfunctions. A Purolator® Fuel Filter scrubs fuel clean of dirt, rust and other contaminants for smooth and efficient engine performance.

Product Features:

• Removes water from the fuel system
• Prevents rust and corrosion in your engine
• Keeps fuel contaminant free
• Replace annually for peak performance
• Meets or exceeds OE specifications

CARQUEST offers high quality, high efficiency fuel filters for automotive, medium and heavy trucks as well as farm, construction, mining and other equipment applications.

Product Features:

• Keeps dirt, debris and contaminants from clogging fuel lines and causing erratic, unstable fuel performance
• Manufactured to a strict quality standards with 98% efficiency at a 10 micron rating.
• Provides maximum fuel system protection.
• Designed to meet or exceed Original Equipment specifications
• Protects the injectors from debris that cause damage and clogging.
• Provides less restriction preventing the fuel pump from working too hard.
• Superior materials, design and construction ensure CARQUEST fuel filters provide excellent performance under all types of operating conditions.

AT IN-LINE FLTR 5/16

Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.

Product Features:

• Guaranteed OE quality form, fit and function
• Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
• Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.