2020 Toyota 4Runner Car Parts & Accessories

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

• Exact fit original equipment design guarantees correct fit and function
• Engineered and built to meet or exceed original equipment quality standards
• Individually tested for performance and reliability
• Hardened, nitride plated steel shaft provides optimal durability
• Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
• Heavy gauge steel body is electrostatically painted and heat cured to OE specs
• Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
• Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
• No special installation tools required
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

New Standard Replacement Driver Side Front Bumper Cover Bracket

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Front Bumper Cover Bracket

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

• Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
• Mirror glass is power adjustable and heated, with turn signal
• OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
• Manual folding for additional clearance
• Textured Black with Paintable to match cover

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Power Door Mirror, With Heated Glass, Without Turn Signal, Without Puddle Lamp, Paint To Match. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:

• With Heated Glass, Without Turn Signal And Puddle Lamp, Paint To Match, Convex Glass
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This door hinge is designed to match the function of an original equipment hinge on specified vehicles. It is engineered to securely connect a door and door frame to help restore proper door operation and replace a rusted, failed, or damaged hinge.

Product Features:

• Direct replacement – this door hinge is designed to match the fit, function and performance of an original equipment hinge on specified vehicles
• Ideal solution – engineered to securely connect a door and door frame to help restore proper door operation, and seamlessly replace a rusted, failed, or damaged hinge
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

The Westin(TM) Ultimate Bull Bar is a front-end light bar made of 3in. diameter tubing for larger model trucks and SUVs and made of 2.5in. diameter tube for smaller trucks and SUVs. Product application is vehicle specific and comes complete with mounting

Product Features:

• 3 in. Diameter Bar
• Mount Kit Included
• License Plate Re-Locator May Be Required
• May Partially Cover License Plate
• Black Powder Coated Mild Steel
• Skid Plate Features Die-Cut Westin Logo
• Easy No Drill Installation
• 5 Year Warranty

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 30 To 60 Minute Professional Installation Time
• T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability
• Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Provides Moderate Protection Against Road Hazards And Debris

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

• Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
• Mirror glass is power adjustable and heated
• OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
• Manual folding for additional clearance
• Textured Black with Paintable to match cover

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille Molding Upper, Chrome, Bumper Mounted, Under Emblem. It is Designed to Replace Your Existing Grille Molding. Check to Be Sure it Fits Your Vehicle.

Product Features:

• Chrome, Bumper Mounted, Under Emblem, Made Of ABS Thermoplastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Driver Side Power Door Mirror, With Heated Glass, Without Turn Signal, Without Puddle Lamp, Paint To Match. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:

• With Heated Glass, Without Turn Signal And Puddle Lamp, Paint To Match, Flat Glass
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

New Standard Replacement Driver Side Fender Liner, 17 Inch Wheels

Product Features:

• 17 Inch Wheels, Made Of Polyethylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Fender Liner, Vehicles With 17 Inch Wheels

Product Features:

• Vehicles With 17 Inch Wheels, Made Of Polyethylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

• A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Mirror Covers. Add Handles And Wheel Skins (Sold Separately) For A Factory-Style Package
• Mirror Covers Are Year-Make-Model Specific And Available In Different Finishes
• Fits Like A Glove Over Existing Mirrors And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
• UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
• COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
• EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

Westin’s HDX Stainless Drop Nerf Step Bars are built with corrosion-resistant, textured black painted stainless steel designed to last under the toughest of conditions. With 1-piece construction, these nerf step bars provide over 2 added inches of toe/heel step area than our competitors and fit tight to the vehicle’s rocker panel for a solid fit and rugged look. HDX Stainless Drop Nerf Step Bars include stainless steel step pads. Step plates are rust resistant and provide maximum traction. Bolt-on installation with no drilling is required. Includes mount kit.

Product Features:

• Corrosion Resistant Black Powder-Coated Stainless Steel
• Die Stamped Stainless Steel Step Areas For Maximum Traction
• Over 2 More Inches Of Toe/Heel Step Area Than Our Competitors
• Features A Notched Bar Design With Heavy-Duty Step Plate
• Includes Rust Resistant Stainless Steel Step Plates
• Removable Step Plates For Easy Cleaning
• Fits Tight To Rocker Panel
• Solid 1-Piece Construction
• Bolt-On Installation No Drilling Required For Most Applications
• Mount Kit Included

The LUND Terrain HX Step(TM) is an aggressive but functional design, these nerf bars provide a rugged off-road look that also makes it easier to get in and out of a truck. The design adds rocker panel protection from the road debris and helps guard against door dings.

Product Features:

• Made From 3 in. 3mm Thick Heavy Duty Steel Tubing
• Hoop Steps Are Securely Welded To Main Tube
• 4 in. Drop For Easier Entry And Exit
• Incl. Non-Slip Skid Plate On Each Step
• Easy No Drill Installation
• Made In The USA

Westins HDX Drop Nerf Step Bars provide the rugged look and function that truck owners need and want. They feature a solid 1-piece steel construction and heavy duty punch plates creating high traction step areas. The HDX Drop Nerf Step Bars also feature Westins notched bar design which provides more than 2″ of additional toe/heel placement versus competitive brands. Available in a textured black finish that complements Westin HDX Bumpers. The HDX Drop Steps have vehicle specific applications and include a vehicle specific mount kit, installation hardware and instructions.

Product Features:

• Die Stamped Stainless Steel Step Areas For Maximum Traction
• Over 2 More Inches Of Toe/Heel Step Area Than Our Competitors
• Removable Step Plates For Easy Cleaning
• Fits Tight To Rocker Panel For Solid Fit And Rugged Look
• Solid 1-Piece Construction
• Bolt-On Installation No Drilling Required For Most Applications
• Mount Kit Included

Whether you are looking for additional traction or easier vehicle entry, TrailFX Running Boards feature a rigid yet attractive solution for trucks, vans, and SUVs. Spanning the full length of the vehicle, these running boards are designed to withstand and deflect the elements, dirt, and debris. Constructed with high quality materials and style in mind, TrailFX Running Boards are an essential addition to any personal or professional vehicle.

Product Features:

• Heavy Duty, Extruded Aluminum And Polished, Marine-Grade Stainless Steel Outer Trim Ensure Maximum Strength And Durability
• 3.5 Inch Wide, UV-Resistant Step Creates A Secure, Non-Slip Surface For Entering And Exiting The Vehicle
• Seamless, Welded Ends Add A Clean, Finished Look
• Track Mounting System Allows For Multiple Mounting Positions To Clear Mud Flaps
• Provides Moderate Protection Against Road Hazards And Debris
• Installation Is Simple Using Required Mounting Brackets

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Stainless or Black

Product Features:

• Lightweight Aluminum Powder Coated Frame
• Full Length Protective Accent Trim
• Slip Resistant Raised Rubber Grommets On The Step Area
• NRT(TM) Powder Coated Steel Braces
• No Drilling Required

Westin R5 Nerf Step Bars have 5 inch wide step area with a unique molded polymer step pad design. R5 Nerf Step Bars are rocker panel mounted and include injection molded bracket covers for a full and stylized appearance. R5 LED Light Kit upgrade is available, sold separately.

Product Features:

• Mount Kit Included
• Rocker Panel Mounted
• 5 in. Wide Step Area
• Injection Molded Polymer Step Pad
• Incl. Injection Molded Bracket Covers
• Optional LED Light Kit Available [Sold Separately]

Westins Pro Traxx 4 Oval Nerf Step Bars feature a 4″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. Applications are bolt-on installation.

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 4 in. Wide Step Area With Westin Logo
• Bolt On Installation; No Drill Required

Westin R5 Nerf Step Bars have 5 inch wide step area with a unique molded polymer step pad design. R5 Nerf Step Bars are rocker panel mounted and include injection molded bracket covers for a full and stylized appearance. R5 LED Light Kit upgrade is available, sold separately.

Product Features:

• Mount Kit Included
• Rocker Panel Mounted
• 5 in. Wide Step Area
• Injection Molded Polymer Step Pad
• Incl. Injection Molded Bracket Covers
• Optional LED Light Kit Available [Sold Separately]

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Black or Chrome

Product Features:

• Lightweight Aluminum Powder Coated Frame
• Full Length Protective Accent Trim
• Slip Resistant Raised Rubber Grommets On The Step Area
• NRT(TM) Powder Coated Steel Braces
• No Drilling Required

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

• High torque and rigidity
• Sensor-safe, non-corrosive formula
• OEM specified
• Low-odor, non-corrosive formula
• Ideal for closed spaced bolt patterns

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 10″ x 15-7/8″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion
• SAE 45 degree fittings for maximum reliability
• Electrostatically powder coated to prevent corrosion
• All aluminum lightweight construction

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

• Imperial Maxi-Cool® plate and fin transmission cooler
• Size: 3/4″ x 11″ x 7-1/2″
• Mid-size and full-size cars, pickups
• GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Product Features:

• Imperial Econo-Kool« tube and fin transmission cooler
• Size: 3/4″ x 5″ x 15-7/8″
• Compact and mid-size cars
• GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

Product Features:

• Imperial Econo-Kool« tube and fin transmission cooler
• Size: 3/4″ x 5″ x 12-1/2″
• Sub-compact to compact cars
• GVWR up to 12,000 lbs.
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

Product Features:

• Class “A” motor homes, large travel trailers, 5th-wheel trailers
• GVWR up to 30,000 lbs.; towing up to 10,000 lbs.

Product Features:

• Imperial Rapid-Cool« plate and fin transmission cooler
• Size: 3/4″ x 11″ x 9-1/2″
• Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
• GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
• 33% more efficient than a comparable tube and fin design

Product Features:

• Mid-size and full-size cars, pickups
• GVWR up to 18,000 lbs.; towing up to 3,500 lbs
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 7-1/2″ x 15-7/8″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

• Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
• Sensor-safe, non-corrosive, RTV silicone
• Protects against leaks caused by vibration and thermal expansion
• Meets performance specs of OE silicone gaskets
• Quickly returns vehicle to service in just 90 minutes

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 7-1/2″ x 12-1/2″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion
• SAE 45 degree fittings for maximum reliability
• Electrostatically powder coated to prevent corrosion
• All aluminum lightweight construction

This automatic transmission wiring harness connector matches the fit and function of the original equipment connector. Factory-style plug and terminals come with wiring pre-installed for quick, reliable splices into the original harness.

Product Features:

• Time-saving replacement – this automatic transmission pigtail connector is pre-wired using a factory style plug and terminals
• Durable construction – this pigtail connector is made using corrosion-resistant terminals and sturdy connector
• Cost-effective solution – offers original equipment quality without the cost of replacing the entire harness
• Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

• High grade materials that are equal to or better than OE provide durability and long service life
• All ABS sensors are tested for proper fit, form, and function
• Wire diameter and sheathing same or larger than OE to ensure product quality
• Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
• Includes all necessary brackets and hardware

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to TOYOTA 03-22;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2003-2022
• Weight approx: 4 Lbs

Dorman’s Oil Drain Plugs are coated for high corrosion resistance and a long service life. Many styles are available, including standard, inset gasket, molded gasket, magnetic, and pilot point.

Product Features:

• Direct replacement for a proper fit every time
• Dorman’s oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor and money
• Our Oil Drain Plugs are designed and constructed to strict engineering quality standards
• Oil Drain Plugs are also included with many of Dorman’s Engine Oil Pans

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

• Designed specially for high-torque and high vibration applications
• Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
• OEM specified
• Low-odor, non-corrosive formula
• Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to TOYOTA 03-22;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2003-2022
• Weight approx: 3 Lbs

The transmission speed sensor is an input to the transmission or powertrain control module reporting the speed of the input shaft, intermediate shaft, or output shaft of the transmission. The control module uses this input to monitor the operation of the transmission for operation and to detect excessive slippage.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Magnet size and strength optimized for precise signal output.
• Precision-wound coated copper windings increase signal output and increase longevity.
• Tailored magnetic circuit programming enhances timing accuracy between the reluctor wheel and circuit output.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Transmission Mount

Automatic Transmission Seal

Extension Hsng. Seal

Shift Rod Seal

Automatic Transmission Drain Plug Seal

Leaky or cracked hydraulic hose? This replacement hose is precision-engineered to match the original clutch hoses on specific vehicles as part of a complete, reliable clutch repair job.

Product Features:

• Direct replacement – this clutch hose is made to match the original hose on specific vehicles
• Thoroughly tested – validated to 4,000 PSI tolerance to ensure product safety standards
• Durable construction – made of high-grade materials designed for optimal chemical and thermal resistance
• Trustworthy value – backed by team of engineers and quality control experts in the United States

Freeze Plug Heater Cartridge made of cast aluminum. Interchangeable with the manufacturers original equipment-the only cost effective aftermarket solution available. Installs easily, just install in engine block core hole. No longer necessary to remove frost plug or drain coolant-just coat wit NSCG silicone grease G-624 (not included), insert, and clip into place. Original equipment for Toyota, Chrysler-jeep, Hyundai, Kia, and General Motors applications (see application guide for details). Simplified application information-Entire range of manufacturers applications covered by only five part numbers.

Product Features:

• Freeze plug heater cartridge

Keep your front-end looking showroom new with the AVS Bugflector II(R); an innovative high-profile hood shield with a wrap-around design. The AVS Bugflector II(R) is constructed using proprietary, impact resistant ABS material, and it offers maximum coverage area to stop rocks from dinging your hood and to keep insects off your windshield. Car wash safe with an easy non-drill installation, the AVS Bugflector II(R) means minimal downtime without sacrificing protection for your vehicle.

Product Features:

• Provides deflection to protect hood, fenders, and windshield
• High profile, full-wrap design for Trucks, SUVs, and Vans
• Off-the-hood design allows for easy cleaning and waxing
• Durable, impact-resistant acrylic construction
• Available in dark smoke or chrome
• Easy, no-drill installation

The Rightline Gear Sport 3 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 3 is one of the largest car top bags on the market.

Product Features:

• Capacity: 18 cu ft
• Dimensions: 48″ L x 36″ W x 18″ H
• Designed for SUVs and minivans, WITH or WITHOUT a roof rack
• Designed for SUVs and minivans, WITH or WITHOUT a roof rack
• Enclosed front end helps fit your gear to the size of the carrier and prevents overfilling.
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

With a low profile, flush-mount design, the Aeroskin® offers ultimate hood protection against bugs, dirt and road debris for Trucks, SUVs, CUVs, Cars and Vans. The Aeroskin hood shield provides a tough defense against bugs, dirt and road debris for vehicle hoods, fenders and windshields; keeping your hood looking showroom new. Combining modern styling with durable construction and maximum protection, the AVS Aeroskin is an innovative hood protector that looks as good as it functions. Its low-profile flush-mount design sits on the front of your vehicle to provide sleek, aerodynamic protection. Installing your AVS Aeroskin is as simple as can be. It features a simple no-drill installation process that uses 3M automotive-grade tape that will keep it securely mounted to your vehicle. Since it mounts flush to your vehicle as well, it’s perfect for those who want a non-obtrusive look that complements your ride’s appearances. Options include a dark smoke finish, matte black or chrome made of high-quality ABS impact resistant acrylic which makes each AVS Aeroskin durable and built to last. With its forward thinking design, awesome aesthetics, and durable construction, the AVS Aeroskin is perfect to keep you hood and windshield safe and clean.

Product Features:

• Custom-molded with precision engineering to ensure a perfect fit
• Provides sleek, aerodynamic hood protection with low-profile, flush-mount design
• Cool, contoured and classy styling accent
• Easy, no-drill installation — installs using 3M automotive-grade adhesive
• Car wash safe
• Available in dark smoke, chrome, matte black, OEM Paint Code Color-match finishes

With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!

Product Features:

• Precision engineered for a custom fit on your vehicle with modern, curved design
• Easy installation with no-drilling or special hardware required
• Attaches easily with 3M automotive-grade adhesive above the window
• Made from durable, impact-resistant acrylic
• Available in dark smoke and chrome finishes

The Rightline Gear Sport 2 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 2 is a popular size for many travelers.

Product Features:

• Capacity: 15 cu ft
• Dimensions: 42″ L x 34″ W x 18″ H
• Designed for SUVs, minivans, and crossovers, WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

Autocraft Easy Fit SUV cover offers superior protection for your vehicles. The fabric which is soft, breathable and with water repellent coating does not only prevent your vehicles from scratching but also protect against mold and mildew. It designed with full elastic, double stitched hem, reinforced grommets and rope to ensure a better and secure fit. Bag included for convenient storage.

Product Features:

• Fit SUVs 15′-19′ (4.5m-5.8m)
• Lightweight, breathable, non-abrasive fabric
• Water repellent coating, protects against mold and mildew
• Full elastic and double stitched hem to ensure a better fit
• 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
• Antenna hole patch included to provide additional protection from water or dust soak into the hole that you cut for antenna to pass through
• Bag included for easy storage

Wade In-Channel Wind Deflectors are a quick and quality solution to reducing wind, noise, heat, and glare without compromising the entry of fresh air when windows are rolled down slightly. They are easily installed by inserting the flanged edge into the d

Product Features:

• Slips Directly Into The Window Channel
• Installs Quickly And Easily Without Exterior Tape
• Secured Using 3M Automotive Grade Tape
• Allows Fresh Air Circulation During Any Weather Condition
• Allows Fresh Air During Any Weather Condition

Autocraft Easy Fit SUV cover offers excellent protection for your vehicles. 3 layers construction includes reflective UV resistant layer, water resistant layer and non-abrasive soft inside layer. The construction does not only prevent your vehicles from scratching but also protects against mold and mildew. Suitable for indoor and outdoor use. It designed with a full elastic, ultrasonic sewn hem and reinforced grommets to ensure a better fit and extreme durability. Bag included for convient storage.

Product Features:

• Fit SUVs 15′-19′ (4.5m-5.8m)
• Medium weight, breathable, non-abrasive fabric for indoor and outdoor use
• Water resistant layer, protects against mold and mildew
• UV treatment protects vehicle from sun damage
• Full elastic and ultrasonic sewn hem to ensure a better fit and extreme durability
• 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
• Antenna hole patch included to provide additional protection from water or dust soaking into the hole that you cut for antenna
• Bag included for easy storage

The Rightline Gear Car Back Carrier is a patented cargo bag that attaches to the rear of your vehicle, WITH or WITHOUT a roof rack. The perfect solution for those who engage in paddle sports, snow sports, or cycling. Keep your gear on the roof and your cargo on the back! The location of the Carrier allows for easy access and also shields it from the wind, saving you $$$ at the gas pump. The Carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The bottom pole frame provides structural support for the cargo in the bag. The Rear Car Clips attach the Car Back Carrier to the rear hatch door on vehicles without a roof rack.

Product Features:

• Capacity: 13 cu ft
• Dimensions: 40″ L x 20″ W x 28″ H
• Designed for SUVs, minivans, and crossovers, WITH or WITHOUT a roof rack
• 100% Waterproof with welded seams and a urethane coated zipper
• Includes: carrier, bottom pole frame, (2) Rear Car Clips, (1) 2″ W belt strap, (2) 1″ W bottom straps, and stuff sack with sewn-in set up guide
• PVC Mesh (polyester re-enforced PVC) and Hydrotuff Material (PVC-backed polyester), UV resistant
• Attaches to SUVs, minivans, and crossovers WITH a roof rack (either side rails or cross bars)
• Attaches to SUVs, minivans, and crossovers WITH a roof rack (either side rails or cross bars)
• Install on vehicles WITHOUT a roof rack with Cargo Saddlebag Car Clips (purchased separately)
• Bottom pole frame provides structure and rigidity for the bag
• Includes: Cargo Saddlebag, bottom pole frame, (1) 2″ W belt strap, (2) 1″ W bottom straps, stuff sack, and sewn-in set up guide

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

• Capacity: 10 cu ft
• Dimensions: 36″ L x 30″ W x 16″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

AVS Bugflector® helps prevent damage to the hood, windshield and fenders from road debris and bugs. Bugflector comes in a traditional hood width design that improves the look of your vehicle and protects your investment. Bugflectors install quickly and are molded with a higher profile with custom fit applications for trucks, vans, SUVs and CUVs. Whether you drive a truck, SUV, CUV or passenger car, you can choose from the style that suits your design preferences and vehicle style.

Product Features:

• Provides deflection to protect hood, fenders, and windshield
• High profile, narrow tapered design for Trucks, SUVs, and Vans
• Off-the-hood design allows for easy cleaning and waxing
• Durable, impact-resistant acrylic construction
• Available in dark smoke finish
• Easy, no-drill installation

The Range 3 Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

• Capacity: 18 cu ft
• Dimensions: 48″ L x 36″ W x 18″ H
• Designed for SUVs and minivans, WITH or WITHOUT a roof rack
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

The WeatherTech sunroof wind deflector provides significant reduction of in cabin wind noise and air turbulence. It is crafted in Germany from the finest 4 Millimeter lightly tinted cast acrylic material. Our sunroof deflector fits the sunroof opening precisely, and is held securely in place with the MagiClip vehicle specific fastening system. To protect your vehicle s finish, the unique AirCushion gasket seals the edge of the deflector. WeatherTech sunroof wind deflector s sleek and sophisticated look is a great addition to any vehicle. Let the fresh air in. The WeatherTech Sunroof Wind Deflector is manufactured to fit factory installed sunroofs and is not intended nor guaranteed to fit aftermarket installations. Designed and Engineered in USA -Handcrafted in Germany.

Product Features:

• Provides Significant Reduction Of In Cabin Wind Noise And Air Turbulence
• Crafted From The Finest 4 Millimeter Thick, Tinted Cast Acrylic That Fits The Sunroof Opening Precisely
• Held Securely In Place With The MagiClip Vehicle Specific Fastening System
• To Protect Your Vehicles Finish, The Unique AirCushion Gasket Seals The Edge Of The Deflector
• Sleek And Sophisticated Look Is A Great Addition To Any Vehicle
• Lets The Fresh Air In

With a flat design and lowest profile available, the AVS Low Profile Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke and matte black for the custom look you want for your vehicle! Enjoy fresh air and comfort no matter the weather!

Product Features:

• Precision engineered for a custom fit on your vehicle with stealthy design for the lowest profile
• Choose Internal (In-Channel) or External (Above Door Glass) mount options
• Easy installation with no-drilling or special hardware required
• Attaches easily with 3M automotive-grade adhesive above the window
• Impact-resistant acrylic or warp-resistant ABS construction
• Available in dark smoke (acrylic) and matte black (ABS) finishes

Let fresh air in while keeping the weather out. Stylishly designed and simple to install, trailFX window vents are the perfect all weather accessory for any vehicle. All TrailFX window vents feature a limited lifetime warranty.

Product Features:

• Designed And Manufactured To Perfectly Match The Contour Of The Window
• Constructed From High-Quality, Durable Acrylic With A Smoke Tint
• Low Profile Design Decreases Wind Noise And Provides Greater Side Mirror Visibility
• Keeps Rain Out And Lets Fresh Air In
• Installs In Minutes To The Outside Of The Window Channel Without Tools Using Pre-Applied Automotive Grade 3M Tape
• Easy Install, No Drill Installation: Installation Stick On Outside Window Channel

Each Vigilante Hood Protector is precision engineered to fit your vehicle and installs easily using 3M automotive-grade adhesive. No special hardware or drilling is required! Car-wash safe, and UV and scratch-resistant, Stampede Automotive Accessories Hood Protectors are proudly made in the USA of impact-resistant acrylic in a range of finishes including smoke, chrome, American flag and genuine licensed Mossy Oak and Realtree camouflage patterns.

Product Features:

• Maximum protection to your hood to complement the look of your vehicle
• Precision engineered for a perfect fit to your vehicle
• Easy installation: no special hardware or drilling required – attaches with 3M automotive-grade adhesive
• Available in smoke, chrome, American flag and camo finishes
• UV and scratch-resistant while being car-wash safe

New Standard Replacement Front License Plate Bracket, For Limited And SR5 Models With Chrome Trim

Product Features:

• For Limited And SR5 Models With Chrome Trim, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today. The WeatherTech FloorLiner accurately and completely lines the interior carpet giving absolute interior protection . The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the vehicles footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending High Density Tri Extruded material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface. Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving. Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss no fuss.

Product Features:

• Accurately And Completely Lines The Interior Carpet Giving Absolute Interior Protection
• Lines The Interior Carpet Up The Front, Back And Even Up The Sides Of The Vehicles Footwell
• Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
• A Patent Pending High-Density Tri-Extruded Material Allows For A Rigid Core For Strength While Offering Surface Friction To The Carpet, As Well As Tactile Feel To The Surface
• Advanced Surfacing Creates Channels That Carry Fluids And Debris To A Lower Reservoir With Further Channeling To Help Minimize Fluid Movement While Driving
• Manufactured From A Proprietary Custom Blended TPO (Thermopolyolefin) That Is Not Only Wear Resistant, But Also Remains Flexible Under Extreme Temperatures
• Available in fronts, rears, center hump, 3rd and 4th row, and complete sets
• Available in black, tan, grey and cocoa

Beat the elements and add some attitude to your Truck, Van or SUV. Sidewind Deflectors allow you to keep your windows partially open, to provide ventilation to the interior. Today’s modern aerodynamic body styles with form fitting doors and windows no longer feature “rain gutters” to channel away water. The result is usually water dripping into the interior. Sidewinds act like a “drip-edge” for your vehicle, this allows you to keep your window partially open for ventilation, without the rain getting in. As air flows around the outside edge of the sidewind it creates a small low pressure area underneath it (much like an airplane wing) which creates suction to keep out the wind and draw out the stale air from inside your vehicle.

Product Features:

• Securely mounts above the window on the door
• Precision engineered for a perfect fit to your vehicle
• Available in impact-resistant acrylic with a smoke finish
• Made in USA
• Car-wash safe

Engine Heater; Replacement Cord

This key contains an embedded micro-chip called a transponder. Each transponder has its own unique code–it’s the key’s ‘fingerprint’. When the key is inserted into the ignition and turned, the transponder is energized and broadcasts its unique code to the car’s receiver in the dashboard. If the car’s receiver recognizes the code, it will allow the car to start. This key holds a Texas 4D-67 G transponder chip. The key blade will need to be cut by a locksmith or automotive professional.

Product Features:

• Replacement Transponder Key with Texas 4D-67 G Transponder Chip
• Contains a transponder chip for enhanced security
• Key blade ready for cutting and pairing

WeatherTech Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your vehicle and feature a raised lip to keep spills, dirt and grease off your vehicles interior, protecting your investment from normal wear and tear. WeatherTech Cargo Liners feature a textured finish that helps to keep cargo from shifting. Perfect for hauling just about anything from gardening supplies to construction materials, even the family pet. WeatherTech Cargo Liners meet FMVSS302 standards. Cargo Liners are proudly designed, engineered and manufactured with American made tooling in the USA. Available for car trunks, minivans and SUVs in Black, Tan or Grey.

Product Features:

• Interior Protection From All Types Of Wear And Tear
• Custom Molded Specifically For Your Vehicle
• High Outside Lip That Helps Contain Spills
• Quick And Easy Cleanup
• A Skid Resistant Surface
• Protects And Preserves The Cargo Area And Trunk Carpet
• Toughness And Durability
• Easy Installation
• Limited Lifetime Warranty

In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today. The WeatherTech FloorLiner accurately and completely lines the interior carpet giving absolute interior protection . The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the vehicles footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending High Density Tri Extruded material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface. Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving. Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss no fuss.

Product Features:

• Accurately And Completely Lines The Interior Carpet Giving Absolute Interior Protection
• Lines The Interior Carpet Up The Front, Back And Even Up The Sides Of The Vehicle Footwell
• Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
• A Patent Pending High Density Tri Extruded (HDTE) Material Allows For A Rigid Core For Strength While Offering Surface Friction To The Carpet, As Well As Tactile Feel To The Surface
• Advanced Surfacing Creates Channels That Carry Fluids And Debris To A Lower Reservoir With Further Channeling To Help Minimize Fluid Movement While Driving
• Manufactured From A Proprietary Custom Blended TPO (Thermopolyolefin) That Is Not Only Wear Resistant, But Also Remains Flexible Under Extreme Temperatures
• Available in fronts, rears, center hump, 3rd and 4th row, and complete sets
• Available in black, tan, grey and cocoa

With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!

Product Features:

• Precision engineered for a custom fit on your vehicle with modern, curved design
• Easy installation with no-drilling or special hardware required
• Attaches easily with 3M(TM) automotive-grade adhesive above the window
• Made from durable, impact-resistant acrylic
• Available in dark smoke and chrome finishes

The Range Jr Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

• Dimensions: 36″ L x 32″ W x 15″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• Weatherproof + with welded seams and a urethane coated zipper
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

Sunshade is a custom fit windshield and window sun shade that protects the vehicle s interior from harmful UV rays. Its clever design helps keep interior temperatures cool in the summer or flip it around and help prevent frost build up in the winter.

Product Features:

• Dual Purpose Design Helps Keep Vehicles Cool In The Summer, And In The Winter Also Helps Warm Up Interiors And Avert Frost Build Up
• Cools In Summer Significantly Reduces The Temperature Of The Vehicle s Dashboard And Steering Wheel
• Heats In Winter Helps To Attract The Sunlight, Warm Up The Vehicle s Windshield And Interior And Avert Frost Build Up
• Effortless Storage Can Easily Be Rolled Up And Stored With The Help Of Its Hook And Loop Strap System
• Sturdy Core Features A Foam Core, Which Makes For Easy Handling And A Sturdy Fit In Vehicle Windows And Windshields
• Custom Fit Custom Fit For The Vehicle, And When Properly Installed, Will Remain Snug In Each Window Opening

This transmitter device operates your vehicle’s keyless entry system with three button functions: LOCK, UNLOCK, and PANIC. With a freshly installed CR2032 battery, this remote can transmit signals from a range of distances. It’s unique design allows it withstand everyday use while remaining in complete working condition. A built in key loop makes it easy to carry on a keychain, carabiner, or lanyard. This remote also contains an emergency key insert, a preventive measure in the instance of possible lockout situations. It will need to be cut by a locksmith or automotive professional. Enhance vehicle entry and security with a simple click of a button.

Product Features:

• Replacement Toyota Smart Key for the FCC ID: HYQ14FBA
• 3 button functions: LOCK, UNLOCK, and PANIC
• Freshly installed battery included
• A built in key loop makes it easy to carry on a keychain, carabiner, or lanyard
• This remote also contains an emergency key insert, a preventive measure in the instance of possible lockout situations

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family

Accelerator Pedal Sensor

Carhartt Mossy Oak Camo SeatSaver seat covers from Covercraft keep the seats in your truck or SUV clean and protected from daily use and weekend adventures while sporting the famous Mossy Oak Break-Up Country camouflage. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment, classic Carhartt styling and the most popular camouflage available, you get seat covers that look great and protect your seats from whatever abuse you can dish out.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Famous Mossy Oak Break up Country camouflage
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Carhartt SeatSaver seat covers from Covercraft are the solution to the problem of keeping the seats in your truck or SUV clean and protected from daily use and weekend adventures. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and classic Carhartt styling, you get seat covers that look great and protect your seats from whatever you throw at them.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Carhartt SeatSaver custom seat covers from Covercraft are the solution to the problem of keeping the seats in your truck or SUV clean and protected from daily use and weekend adventures. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and classic Carhartt styling, you get seat covers that look great and protect your seats from whatever you throw at them.

Product Features:

• Custom-Patterned Seat Cover: Designed to fit your specific vehicle’s seats, ensuring a tailored appearance
• Easy Installation and Removal: Hassle-free process for quick setup and removal when needed
• Machine Washable: Easy maintenance and cleaning, allowing you to keep them looking fresh
• Carhartt Tough: Made with iconic Duck Weave fabric, triple-stitched seams, and treated with Rain Defender DWR for durability, water resistance, and rugged style
• Heavy-Duty Protection: Shields your factory seats from work, hunting, fishing, pets, and anything else you throw at them; Not only is the fabric super durable, but it is highly water-resistant to bead away any moisture, spills, or drool from your pups

SeatSaver seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

• Heavy duty polycotton fabric for durability and comfort
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

SeatSaver custom seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

• Heavy duty polycotton fabric for durability and comfort
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

SeatSaver seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

• Heavy duty polycotton fabric for durability and comfort
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

SeatSaver seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

• Heavy duty polycotton fabric for durability and comfort
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

SeatSaver seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

• Heavy duty polycotton fabric for durability and comfort
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

SeatSaver seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

• Heavy duty polycotton fabric for durability and comfort
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

SeatSaver seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

• Heavy duty polycotton fabric for durability and comfort
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

SeatSaver seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

• Heavy duty polycotton fabric for durability and comfort
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

SeatSaver custom seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

• Heavy duty polycotton fabric for durability and comfort
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

The Limited Edition Custom Dashboard Cover features a new warp-knit polyester fabric style that looks great with today’s vehicle interiors. Individually made to fit your vehicle’s specific dashboard. DashMat dashboard covers are a stylish way to cut windshield haze caused by gasses emitted from the dashboard. Dramatically reduces hazardous windshield glare as well. Rays from the sun beat through the dashboard at extremely high temperatures causing damage to the dashboard. Limited Edition DashMat dash covers protect your vehicle’s dashboard in the most extreme temperature conditions.

Product Features:

• Unique warp-knit design fits perfectly with today’s vehicle interiors
• Compliments technical fabrics in newer vehicles
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Vents and sensor openings pre-cut for a factory finish look
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s #1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation