2014 Jeep Wrangler Vehicle Hoods

Essential 2014 Jeep Wrangler Vehicle Hoods

Crown Auto Jeep Replacmnt – Black, Plastic, Set Of 2 (Part No.488601)

Black, Plastic, Set Of 2

from

$15.29
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Manufactured From High Quality Material
  • Engineered To The Specifications
  • Meets The Quality Standards
  • Designed For Performance And Durability
  • Easy To Install
See More

KAI – Hood Panel (Part No.CH1230304)

Hood Panel

from

$599.99
New Standard Replacement Hood Panel, With 2 Washer Nozzles, Without Power Bulge

Product Features:
  • With 2 Washer Nozzles, Without Power Bulge, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Atlas Lift – Lift Support (Part No.LS10668)

Lift Support

from

$26.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

StrongArm – Back Glass Lift Support: 25.47" Ext Length, 10.79" Travel, 52 Lbs of Force, 1 Pk (Part No.C4761)

Back Glass Lift Support: 25.47" Ext Length, 10.79" Travel, 52 Lbs of Force, 1 Pk

from

$29.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

StrongArm – Back Glass Lift Support: 22.99" Ext Length, 9.14" Travel, 28 Lbs of Force, 1 Pk (Part No.C6602)

Back Glass Lift Support: 22.99" Ext Length, 9.14" Travel, 28 Lbs of Force, 1 Pk

from

$26.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

Crown Auto Jeep Replacmnt – Black, Oem Replacement, Strut Only, Single (Part No.55029560)

Black, Oem Replacement, Strut Only, Single

from

$46.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Manufactured From High Quality Material
  • Engineered To The Specifications
  • Meets The Quality Standards
  • Designed For Performance And Durability
  • Easy To Install
See More

StrongArm – Back Glass Lift Support: 25.39" Ext Length, 10.82" Travel, 33 Lbs of Force, 1 Pk (Part No.C4249)

Back Glass Lift Support: 25.39" Ext Length, 10.82" Travel, 33 Lbs of Force, 1 Pk

from

$19.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

Stabilus – Hatch Strut (Part No.O2070550099STB)

Hatch Strut

from

$22.16
Hatch Strut

Atlas Lift – Lift Support (Part No.LS10493)

Lift Support

from

$18.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

Crown Auto Jeep Replacmnt – Black, Oem Replacement, Strut Only, Single (Part No.55076310AB)

Black, Oem Replacement, Strut Only, Single

from

$55.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Improve The Performance
  • Easy Installation
See More

Dorman – Help – Hood Bumper Rest (Part No.45363)

Hood Bumper Rest

from

$17.99
This hood stop support is designed to match the fit and function of the original support on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this hood stop support is designed to match the fit and function of the original support on specified vehicles.
  • Restores functionality – reliable replacement for an original support that has failed due to collision damage or has cracked from fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

RT Offroad – HOOD HINGE (Part No.RT34100)

HOOD HINGE

from

$124.99
Product Features:
  • Limited 12 Month Warranty Or Limited 12,000 Mile Warranty
See More

KAI – Hood Hinge (Part No.CH1236125)

Hood Hinge

from

$81.99
New Standard Replacement Driver Or Passenger Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Rugged Ridge – Hood Hinge Cover (Part No.11111.10)

Hood Hinge Cover

from

$158.99
These cast stainless design Hinge Treatments are guaranteed not to rust while providing a new beefy look. Door and Hood Hinge covers feature a easy to install design. Replacing your existing hinges can break and crack the surrounding paint, as the hinges

Product Features:
  • Stainless Steel
  • OE Style
  • Direct Fit
  • Includes Hardware
  • Limited 5 Year Warranty
See More

2014 Jeep Wrangler Vehicle Hoods

Maybe you’re in the middle of a full rebuild of that 2014 Jeep Wrangler. Maybe you just need a couple of Vehicle Hoods. Either way, Advance Auto Parts has 8 different Vehicle Hoods in our inventory ranging from $17.99 to $599.99. That means you can find the exact parts or products you need to keep that 2014 Jeep Wrangler running smoothly.

Vehicle Hoods are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 2014 Jeep Wrangler. Atlas Lift, Dorman, and RT Offroad are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Vehicle Hoods for your 2014 Jeep Wrangler, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Vehicle Hoods to keep your 2014 Jeep Wrangler rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Vehicle Hoods Brands To Make Your 2014 Jeep Wrangler Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2014 Jeep Wrangler demands trusted brand parts and products to keep it running. Many trusted brands of Vehicle Hoods make up Advance Auto Parts’ inventory, and all are ready to help make your Wrangler the best it can be. Be sure to browse some of our top Vehicle Hoods brands and parts.

FAQs for 2014 Jeep Wrangler Vehicle Hoods

What are the most purchased Vehicle Hoods for the 2014 Jeep Wrangler?

Out of 8 Vehicle Hoods for the 2014 Jeep Wrangler, the most popular in our inventory are:
Lift Support
from $26.99
This product is not rated
Lift Support
Lift Supports
Hood Bumper Rest
from $17.99
This product is not rated
Hood Bumper Rest
Hood Stop Supports
HOOD HINGE
from $124.99
This product is not rated
HOOD HINGE
Hood Hinges