2011 Ford Mustang Performance and Racing Products

Essential 2011 Ford Mustang Performance and Racing Products

Spectre – Water Pump Pulley (Part No.4494)

Water Pump Pulley

from

$93.99
Spectre’s high quality crankshaft, alternator and engine pulley sets are designed to help dress up your engine compartment. All of our pulleys are designed to work in OE applications and with the OE style serpentine or v-belt configuration.

Product Features:
  • Engine pulleys come in a chrome or polished finish
  • Designed for OE engine setup
  • Looks great
  • Easy to install
See More

Spectre – Water Pump Pulley (Part No.4491)

Water Pump Pulley

from

$77.99
Spectre’s high quality crankshaft, alternator and engine pulley sets are designed to help dress up your engine compartment. All of our pulleys are designed to work in OE applications and with the OE style serpentine or v-belt configuration.

Product Features:
  • Engine pulleys come in a chrome or polished finish
  • Designed for OE engine setup
  • Looks great
  • Easy to install
See More

B & M – Flexplate, Small Block Ford 28.2 Ounce 157 Tooth (Part No.50236)

Flexplate, Small Block Ford 28.2 Ounce 157 Tooth

from

$153.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for Ford, Lincoln and Mercury (externally balanced) 289 and 302ci V8 engines with 28.2 ounce imbalance. Features include high tensile strength steel to resist elongation and cracking, 10.50 inch bolt pattern and 157 tooth ring gear. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M flexplates are ideal for hot rods, street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with C4 and C6 automatic transmissions.

Product Features:
  • NHRA/IHRA Legal For All Classes
  • Includes SFI Certification Sticker
  • Ideal For Street Applications
  • To Extreme Duty Racing
  • To High RPM Use
See More

Hays – Flywheel: Late Ford 28Lb Steel (Part No.12-540)

Flywheel: Late Ford 28Lb Steel

from

$412.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:
  • Certified Billet Material
  • Borg and Beck Clutch Pattern
  • Long-Style Clutch Pattern
  • Ring Gear Securely Mounted To Prevent Spinning
See More

SCT Performance – Preloaded Performance Programmer for Increased Horsepower & Torque (Part No.7015)

Preloaded Performance Programmer for Increased Horsepower & Torque

from

$456.99
The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.

Product Features:
  • Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
  • Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
  • Reads and clears DTC (Diagnostic Trouble Codes) with ease.
  • Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
  • Full color LCD display
  • High-speed data logging/monitoring
  • Dual analog inputs
  • Most popular vehicles supported
  • Installs quickly and easily
  • Easy restoration back to stock
  • User adjustable vehicle parameters
  • USB Interface cable included
  • Product might not be available in all states due to local laws.
See More

SCT Performance – Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (Part No.40490)

Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges

from

$456.99
The BDX hand-held performance tuner gives drivers the edgepower they need, whether tackling tough terrain, pulling a heavy payload, or maximizing fuel economy on the highway. Its sleek design, full-color display, and customizable gauges help track and adjust powertrain performance to deliver more horsepower and torque when it’s needed most. Cloud-based tune delivery over built-in WiFi means that the BDX will always be running the latest tuning – enabling drivers to stay one step ahead of the packÿ.

Product Features:
  • Monitor and display vehicle data using the on-screen virtual gauges.
  • Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
  • Reads and clears DTC (Diagnostic Trouble Codes) with ease
  • Product might not be available in all states due to local laws.
See More

Flowtech – Standard Header X-Pipe (Part No.12114YFLT)

Standard Header X-Pipe

from

$227.99
Standard Header X-Pipe

Flowtech – Pro-Stang; Starter Tube (Part No.53609FLT)

Pro-Stang; Starter Tube

from

$83.99


Product Features:
  • Aluminized Tubing
  • Mustang Enthusiasts Only
  • OEM Hangers
  • Large 2-12in. Diameter Tubing
  • Designed For Drag Racing
See More

Motive Gear – Differential Mini Spool (Part No.MS88-28)

Differential Mini Spool

from

$98.99


Product Features:
  • MINI SPOOL 8.8 FORD 28SPL
See More

Richmond Gear – MiniSpool (Part No.78-8831-1)

MiniSpool

from

$151.99
MiniSpool

Energy Suspension – Track Bar Bushing Set (Part No.4.7129R)

Track Bar Bushing Set

from

$33.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Energy Suspension – Track Bar Bushing Set (Part No.4.7129G)

Track Bar Bushing Set

from

$33.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15815)

Street Series Crossmember-Back Performance Exhaust System

from

$923.99
The MagnaFlow 1964-1966 Ford Mustang Street Series Crossmember-Back Performance Exhaust System 15815 brings enhanced engine sound and dyno-proven performance to your 2.8L, 3.3L, 4.3L, 4.7L 1964-1966 Ford Mustang with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Mustang exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Ford Mustang’s exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15815 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Flowmaster Inc. – Header-back System – Dual Rear Exit – American Thunder – Aggressive Sound (Part No.17281)

Header-back System - Dual Rear Exit - American Thunder - Aggressive Sound

from

$761.99
For the person who is looking for a complete Header-back dual exhaust system with an aggressive tone. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. American Thunder systems deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
See More

Energy Suspension – M/TShftBshngKt (Part No.4.1134G)

M/TShftBshngKt

from

$23.99
M/TShftBshngKt

Competition Cams – Ultra-Gold ARC Rocker Set w/ 1.6 Ratio for Ford 289-351W w/ 3/8" Stud (Part No.19043-16)

Ultra-Gold ARC Rocker Set w/ 1.6 Ratio for Ford 289-351W w/ 3/8" Stud

from

$427.99
These COMP Cams Ultra-Gold Aluminum Roller Rocker Arms with a 3/8″ stud diameter and 1.6 ratio are designed for Ford V8 289-302-351W applications. The new modern design features of these Ultra-Gold Rockers are proven to withstand extremely aggressive spring pressure and valve lift. Designed specifically for high performance street and race engines, the Ultra-Gold Aluminum Rocker Arms are precision CNC-machined to strict tolerances. Developed to meet the demands of professional engine builders, these rockers include features never before possible in an aluminum rocker arm.

Product Features:
  • CNC-machined, lightweight design removes weight and yields unrivaled quality and ratio accuracy
  • Designed for high performance street and race engines
  • Precision-sorted trunion bearings withstand elevated valve spring pressure and valve lift
  • Additional clearance, up to 1.650″ O.D. valve spring
See More

Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)

ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST

from

$237.99
The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.

Product Features:
  • Cost effective aluminum construction provides superior strength to weight ratio
  • Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
  • Durable design increases valve lift while withstanding the rigors of moderate race use
  • Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.
See More

Mr. Gasket – OilFillerCapCvr (Part No.6713G)

OilFillerCapCvr

from

$64.99
OilFillerCapCvr

Motive Gear – Performance Differential Ring and Pinion (Part No.F890350)

Performance Differential Ring and Pinion

from

$216.99


Product Features:
  • FRD 10BLT 9.0 R/P 3.50 MGP
See More

Motive Gear – PRO Gear Lightweight Differential Ring And Pinion – Small Pinion (Part No.F990543SP)

PRO Gear Lightweight Differential Ring And Pinion - Small Pinion

from

$441.99


Product Features:
  • R&P FORD 9″ 5.43, 9310 SMALL PIN 28 SPL. PRO
See More

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9924)

Cold Air Intake Kit Engineered to Add Horsepower & Torque

from

$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:
  • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
  • IMPROVED ENGINE SOUND: Hear the power under the hood
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
  • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
  • WILL NOT VOID VEHICLE WARRANTY
See More

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 13 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-11312)

Magnum FORCE Cold Air Intake: Gain up to 13 Horsepower! Oiled Air Filter For Maximum Airflow

from

$357.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:
  • Uses Pro 5R Filter For Maximum Air Flow
  • Rotomolded Plastic Tube For Maximum Air Flow
  • 100% cfm Flow Gain
  • Improved Throttle Response
See More

Dynomax – Ultra Flo Muffler: Direct Fit, Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval (Part No.53764)

Ultra Flo Muffler: Direct Fit, Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval

from

$174.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler

Product Features:
  • Stainless steel construction for lifelong protection
  • 100% welded design for maximum durability
  • Straight through design ensures unrestricted exhaust flow and reduces back pressure
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
See More

Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.8043043)

40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound

from

$123.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – DBX Muffler, 2.5in Center Inlet 2.5in Center Outlet, 14in long, Non-Reversible, Moderate Sound (Part No.12514310)

DBX Muffler, 2.5in Center Inlet 2.5in Center Outlet, 14in long, Non-Reversible, Moderate Sound

from

$227.99
dBX series mufflers – this Laminar Flow internal configuration muffler features the revolutionary HP core design delivering excellent sound control for a wide variety of engine types where vehicle under-chassis space is limited. Utilizing cool shell technology to minimize radiant heat from the muffler body, they are perfect for sport compact imports as well as muscle cars and other performance applications. Constructed with 409S stainless steel internal components and wrapped with a proprietary insulation material and finally a polishable 304 stainless steel casing, these mufflers are as attractive as they are functional delivering a moderate to aggressive tone.
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

Remote Oil Filter Kit

from

$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

Product Features:
  • Relocate oil filter to an easy access location
See More

2011 Ford Mustang Performance and Racing Products

You count on your 2011 Ford Mustang to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 37 Performance and Racing Products ranging in price from $17.99 to $713.99, you’re sure to find everything you need for your 2011 Ford Mustang.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 15 different brands like K&N, Flowmaster Inc., and SCT Performance. 2011 Ford Mustang Performance and Racing Products start as low as $17.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 109 extensive product reviews on 2011 Ford Mustang Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound with 5.0 stars and Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound with 5.0 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 2011 Ford Mustang below to get started!

Top-Rated Performance and Racing Products Brands For Your 2011 Ford Mustang

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 Ford Mustang running right for years to come. In our inventory you’ll find brands like K&N, Flowmaster Inc., SCT Performance, and even more.

Popular K&N Performance and Racing Products

You’ll find popular K&N brand products across Performance Air Intake Kits and Performance Oil Filters. All are waiting to get your 2011 Ford Mustang back on the road. Some of the top-rated K&N products in these categories are:

FAQs for 2011 Ford Mustang Performance and Racing Products

What are the most purchased Performance and Racing Products for the 2011 Ford Mustang?

Out of 37 Performance and Racing Products for the 2011 Ford Mustang, the most popular in our inventory are:
Preloaded Performance Programmer for Increased Horsepower & Torque
from $456.99
(1)
Preloaded Performance Programmer for Increased Horsepower & Torque
Computer Chip Programmers
Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges
from $456.99
This product is not rated
Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges
Computer Chip Programmers

What are the top-rated 2011 Ford Mustang Performance and Racing Products?

Top-rated Performance and Racing Products for your 2011 Ford Mustang based on customer reviews/ratings are:
Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound
from $113.99
(1)
Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound
“sounds great just what I WAS LOOKING FOR.”
Cold Air Intake Kit Engineered to Add Horsepower & Torque
from $199.99
(1)
Cold Air Intake Kit Engineered to Add Horsepower & Torque
“Sounds great, highly recommend for any s197 mustang v6”