2011 Ford Mustang Performance and Racing Products
Find Your Specific 2011 Ford Mustang Performance and Racing Products
Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 2011 Mustang. Advance Auto Parts has popular Mustang parts like Performance Engines, Performance Exhaust Products, Performance Suspension Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Mustang model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2011 Ford Mustang Performance and Racing Products below and start saving instantly.
Popular 2011 Ford Mustang Performance and Racing Products Categories
Essential Performance and Racing Products for 2011 Ford Mustangs
Edelbrock – Torker-Plus Camshaft Kit for 1957-95 Small-Block Ford 289-302 V8 (Part No.5022)
from
$440.99
Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance. Designed to work with Torker II manifolds for performance from 2500 to 6500 RPM, these camshafts are ideal for high-performance street, drag or marine applications. Torker-Plus cams have a slightly rough idle and are not suitable for trucks or towing applications. Hydraulic flat tappet lifters are included with each camshaft.
Product Features:
See More
Product Features:
- Designed for 2500 to 6500 Performance
- Designed for Hi-Perf Street; Drag or Marine Use
- Matched to Edelbrock Torker II Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
Energy Suspension – Control Arm Bushing Set (Part No.4.3106G)
from
$19.49
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Shifter Bushing Set (Part No.4.1131G)
Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)
from
$149.99
Product Features:
See More
- Non-Rotator Type
- 1.550 in. Outer Diameter
- .190 Wire Size
- Single Coil Spring Type
- Set of 16
Dynomax – Exhaust Intermediate Pipe (Part No.55568)
from
$73.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
SCT Performance – Preloaded Performance Programmer for Increased Horsepower & Torque (Part No.7015)
from
$399.99
The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.
Product Features:
See More
Product Features:
- Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease.
- Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
- Full color LCD display
- High-speed data logging/monitoring
- Dual analog inputs
- Most popular vehicles supported
- Installs quickly and easily
- Easy restoration back to stock
- User adjustable vehicle parameters
- USB Interface cable included
- Product might not be available in all states due to local laws.
K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter (Part No.71-3527)
from
$419.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Powder-coated aluminum intake tube paired with dry synthetic air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 50,000 miles under normal highway driving conditions
- Typical installation can be completed in 90 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 30 Horsepower, With Washable Air Filter (Part No.57-2545)
from
$367.99
The K&N 57-2545 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Ford Mustang SVT Cobra models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-2545 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the air filter and into the engine’s throttle body for a guaranteed power gain. The air intake system accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower
- Designed to improve throttle response and engine sound
- Lasts up to 100,000 miles before service is required (under normal highway driving conditions)
- Easy to install, usually in 90 minutes or less
- Replaces entire factory air intake system
- Washable and reusable lifetime air filter
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Energy Suspension – Control Arm Bushing Set (Part No.4.3132G)
from
$75.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.4.3144G)
from
$106.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
NOS/Nitrous Oxide Systems – NOS Single Fogger Wet Nitrous System – Ford (Part No.06017BNOS)
from
$1013.00
Product Features:
See More
- Utilizes a NOS Fogger Soft Plumb wet nozzle to provide smooth power delivery
- Single nozzle system offers easy installation, excellent value, and great power gains
- Black system provides a stealthy appearance
- Includes jetting for 50, 100, & 150 RWHP (rear wheel horsepower)
- Includes fuel line adapter fitting and inline nitrous filter
- Bottle is made from 6061-T6 aluminum
- Supports up to 250 RWHP (jets purchased separately)
- Includes 10 lb. black nitrous bottle with brackets
NOS/Nitrous Oxide Systems – NOS Sniper Plate Wet Nitrous Plate System – Ford (Part No.07166NOS)
from
$843.99
Product Features:
See More
- Offers a low cost EFI nitrous kit solution
- Direct bolt-on 1/2″ black billet aluminum plate fits between throttle body and intake manifold
- Supports up to 175 HP
- Included jetting for 100, 125 & 150 HP
- Includes orange Sniper 10 lb. nitrous bottle with brackets
- Stainless steel braided lines
- Simple installation and hardware included
- Ideal for Use w/ Terminator X – for Nitrous Control
Motive Gear – Performance Differential Ring and Pinion (Part No.F890650)
Richmond Gear – RngPnn (Part No.F9620)
from
$185.99
RngPnn
Motive Gear – Differential Mini Spool (Part No.MS9-31)
Motive Gear – Differential Mini Spool (Part No.MS88-31)
Edelbrock – Competition Intake, Ford Mustang, 2015-2020, For Modular Inlet Supercharger (Part No.15811)
from
$587.99
Edelbrock Air Intake System No. 15811 is a competition-style kit designed for 2015-2020 Mustang Supercharger kits with the modular inlet. This intake kit increases airflow by reducing restriction in front of the supercharger inlet. A larger 113mm mass airflow housing increases the range of the OEM MAF sensor by providing more room to grow over the stock air box assembly.
See More
K&N – Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter (Part No.71-3535)
from
$419.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Powder-coated aluminum intake tube paired with dry synthetic air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 50,000 miles under normal highway driving conditions
- Typical installation can be completed in 90 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- HIGH QUALITY: Made in America.
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.8042543)
from
$135.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)
from
$137.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Mr. Gasket – Differential Cover Kit (Part No.9893G)
from
$89.99
Made from heavy gauge steel, this chrome plated rear end cover comes complete with bolts and gaskets.
Product Features:
See More
Product Features:
- Chrome plated steel for looks
- Includes bolts and gasket
MagnaFlow – Street Series Exhaust System Kit (Part No.15638)
from
$919.99
The MagnaFlow 1994-1998 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L, 5.0L 1994-1998 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15638 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15638 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.
Product Features:
See More
Product Features:
- Durable corrosion-resistant stainless steel construction
- Dyno-proven performance
- CNC precision robotic manufacturing techniques
Flowmaster Inc. – Axle-back System – Dual Rear Exit – American Thunder – Moderate Sound (Part No.17410)
from
$699.99
This moderate sounding system is designed to replace the original rear mounted mufflers located behind the rear axle. With easy fit in mind, the system is mandrel bent for maximum performance and includes specially selected mufflers to support the performance image of the car. As a Force II system, it delivers a moderate exterior tone with moderate interior sound level that is suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, the system includes all necessary parts and hardware for easy installation.
See More
Competition Cams – Magnum 244/244 Hydraulic Flat Cam (Part No.31-330-3)
from
$267.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Competition Cams – Big Mutha’ Thumpr 242/257 Hydraulic Flat Cam (Part No.32-602-5)
from
$395.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)
from
$249.99
The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.
Product Features:
See More
Product Features:
- Cost effective aluminum construction provides superior strength to weight ratio
- Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
- Durable design increases valve lift while withstanding the rigors of moderate race use
- Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.
Upgrade your 2011 Ford Mustang with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2011 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 55 Performance and Racing Products for the 2011 Ford Mustang, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Exhaust Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2011 Ford Mustang at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $23.79 to $2,504.00, with
an average price of $357.01.
Our 55 Performance and Racing Products in stock come from 17 trusted brands, so you’re sure to find the right part for your 2011 Ford Mustang without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Ford Mustang, we stock popular OEM and aftermarket Performance and Racing Products from top names
like SCT Performance, K&N, Spectre, and more.
SCT Performance Performance and Racing Products
start at just $399.99 and boast an impressive 5.0 stars average rating from customers.
K&N and Spectre also bring quality to the table, with Performance and Racing Products available starting at $209.99, and at an average 4.8 stars rating.
With 12 customer reviews and counting, our 2011 Ford Mustang Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2011 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place.
Start shopping confidently below for your 2011 Ford Mustang!
Best-Selling Performance Engines for 2011 Ford Mustangs
Enhance the driving experience in your Ford with 16 quality Performance Engine components, starting at $28.99.
Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)
from
$249.99
The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.
Product Features:
See More
Product Features:
- Cost effective aluminum construction provides superior strength to weight ratio
- Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
- Durable design increases valve lift while withstanding the rigors of moderate race use
- Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.
Competition Cams – Xfi Nsr 228/231 Hydraulic Roller Cams For Ford 5.0L Coyote (Part No.191100)
from
$2504.00
Xfi Nsr 228/231 Hydraulic Roller Cams For Ford 5.0L Coyote
Competition Cams – XERSC 222/224 FORD4V (Part No.106260)
from
$2367.00
XERSC 222/224 FORD4V
Competition Cams – XRPM 218/218MOD4V (Part No.106060)
from
$2367.00
XRPM 218/218MOD4V
Competition Cams – Coyote Beehive Spring Kit with Chromemoly Steel Retainers (Part No.26113CY-KIT)
from
$1047.00
Coyote Beehive Spring Kit with Chromemoly Steel Retainers
Competition Cams – 32 Springs (Part No.26125-32)
from
$933.99
32 Springs
Competition Cams – 32 Springs (Part No.26123-32)
from
$933.99
32 Springs
Competition Cams – ENGINE ROCKER ARM (Part No.1831-16)
from
$704.99
ENGINE ROCKER ARM
Competition Cams – 16 Springs (Part No.26113-16)
from
$409.99
16 Springs
Competition Cams – ROCKERS, FS 1.7 7/16 (Part No.1834-8)
from
$376.99
ROCKERS, FS 1.7 7/16
Competition Cams – 16 Springs (Part No.26123-16)
from
$309.99
16 Springs
Competition Cams – ENGINE ROCKER ARM (Part No.17045-16)
from
$301.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1834-1)
from
$61.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1832-1)
from
$61.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.17045-1)
from
$29.99
ENGINE ROCKER ARM
Competition Cams – 1 Spring (Part No.26125-1)
from
$28.99
1 Spring
Most Popular 2011 Ford Mustang Performance Exhaust Products
Customize your Ford with 4 Performance Exhaust Products products
like Performance Exhaust Mufflers,
Performance Exhaust Pipes, and
Performance Exhaust System Kits, all
priced under $819.99.
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)
from
$139.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Dynomax – Exhaust Intermediate Pipe (Part No.55568)
from
$73.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Flowmaster Inc. – DBX Muffler, 2.25in Center Inlet 2.25in Center Outlet, 14in long, Non-Reversible, Moderate Sound (Part No.12414310)
from
$245.99
dBX series mufflers – this Laminar Flow internal configuration muffler features the revolutionary HP core design delivering excellent sound control for a wide variety of engine types where vehicle under-chassis space is limited. Utilizing cool shell technology to minimize radiant heat from the muffler body, they are perfect for sport compact imports as well as muscle cars and other performance applications. Constructed with 409S stainless steel internal components and wrapped with a proprietary insulation material and finally a polishable 304 stainless steel casing, these mufflers are as attractive as they are functional delivering a moderate to aggressive tone.
See More
Flowmaster Inc. – Axle-back System 409S – Dual Rear Exit – Force II – Moderate Sound (Part No.817497)
from
$819.99
Wake up the performance and sound hidden in your V6-powered 2011 to 2013 Mustang with a Flowmaster Force II exhaust system. These moderate sounding systems retain the dual exhaust system outlets and are designed to replace the original rear mounted mufflers using factory hangers and connections. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially tuned mufflers. As a Force II system, it delivers a moderate exterior tone and a mild interior tone and is suited to the enthusiast who wants a subtle but distinctive exhaust note. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. The kit is a true bolt-on and includes everything you need to easily install at home with basic hand tools.
See More
Top Picks for 2011 Ford Mustang Performance Suspension Products
Upgrade Ford Mustangs with top-quality Performance Suspension Products parts, including 2 OEM and aftermarket selections for your 2011 model.
Energy Suspension – CntrlArmBshngKt (Part No.4.3165R)
from
$109.99
CntrlArmBshngKt
Energy Suspension – CntrlArmBshngKt (Part No.4.3165G)
from
$109.99
CntrlArmBshngKt
In-Demand Performance Air Intake Kits for 2011 Ford Mustangs
Select from 10 premium Performance Air Intake Kits parts for your 2011 Ford Mustang, with prices ranging from $209.99 to $535.99.
Spectre – Spectre Air Intake Kit (Part No.9929)
from
$209.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
- Product might not be available in all states due to local laws.
K&N – Cold Air Intake: Adds Up To 20 Horsepower, With Washable Air Filter (Part No.69-3527TP)
from
$419.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter (Part No.71-3527)
from
$419.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Powder-coated aluminum intake tube paired with dry synthetic air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 50,000 miles under normal highway driving conditions
- Typical installation can be completed in 90 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- HIGH QUALITY: Made in America.
Edelbrock – Competition Air Intake Kit #15898 For 11-14 Mustang GT (Part No.15898)
from
$535.99
Edelbrock Part #15898 Edelbrock Competition Air Intake kit provides the increased airflow needed for 2011-14 Mustang GT racing applications. It includes a high flow mass air flow Sensor, 7.85in. long reusable open element filter, plastic shroud and all ne
Product Features:
See More
Product Features:
- Red Filter Color
- Cotton Gauze Filter Material
- Cone Filter Shape
- 10 Overall Length
- 95mm Housing Diameter
Flowmaster Inc. – Cold Air Intake (Part No.615146)
from
$426.10
Cold Air Intake
Airaid – Cold Air Intake System with Limited Lifetime air filter. Guaranteed to increase Horsepower! (Part No.450-303)
from
$419.99
Product Features:
See More
- Product might not be available in all states due to local laws.
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 10 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12102-P)
from
$399.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses Pro 5R Filter For Maximum Air Flow
- Uses 360 deg. Radial Flow Air Filter
- 20% cfm Flow Gain
- Improved Throttle Response
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 22 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-11982-B)
from
$399.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Wrinkle-Black Powder coat Intake Tube
- Pro 5R High-Flow Filter Media
- 360 deg. Radial Flow Air Filter
- 5 Layer Cotton Gauze Media
K&N – Cold Air Intake: Adds Up To 30 Horsepower, With Washable Air Filter (Part No.57-2579)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter (Part No.57-2578)
from
$262.99
57-series OEM air box intake systems include a washable, reusable High-Flow Air Filter paired with a CAD-designed high airflow intake tube, and is designed to be a simple, cost-effective performance upgrade. The included oiled cotton filter is a direct replacement for your factory filter, drops easily into the factory air box, can go up to 100,000 miles between filter services under normal highway driving conditions, and offers K&N’s industry-leading engine protection. Each 57-series OEM air box intake system is designed for specific vehicle applications to ensure a precise fit, and can typically be installed in less than 60 minutes with only standard hand tools. Buy with confidence under the K&N No-Hassle Lifetime Limited Warranty. Legal in all 50 States.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with a direct replacement High-Flow Air Filter
- Designed to improve throttle response and engine sound
- Engineered to provide high airflow and exceptional filtration
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- 50 State legal
Most Sold 2011 Ford Mustang Programmers
Explore our best-selling Ford parts for the 2011 Mustang among 5 OEM and aftermarket options starting from $79.99.
SCT Performance – Preloaded Performance Programmer for Increased Horsepower & Torque (Part No.7015)
from
$399.99
The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.
Product Features:
See More
Product Features:
- Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease.
- Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
- Full color LCD display
- High-speed data logging/monitoring
- Dual analog inputs
- Most popular vehicles supported
- Installs quickly and easily
- Easy restoration back to stock
- User adjustable vehicle parameters
- USB Interface cable included
- Product might not be available in all states due to local laws.
SCT Performance – Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (Part No.40490)
from
$456.99
The BDX hand-held performance tuner gives drivers the edgepower they need, whether tackling tough terrain, pulling a heavy payload, or maximizing fuel economy on the highway. Its sleek design, full-color display, and customizable gauges help track and adjust powertrain performance to deliver more horsepower and torque when it’s needed most. Cloud-based tune delivery over built-in WiFi means that the BDX will always be running the latest tuning – enabling drivers to stay one step ahead of the packÿ.
Product Features:
See More
Product Features:
- Monitor and display vehicle data using the on-screen virtual gauges.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease
- Product might not be available in all states due to local laws.
Hypertech – Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size (Part No.3300)
from
$239.99
If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy Spectrum allows you to re-program for correct speedometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).
Product Features:
See More
Product Features:
- Speedometer correction for multiple tire sizes
- Return back to factory settings
- Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
- Internet updateable
- Product might not be available in all states due to local laws.
Hypertech – Max Energy Spectrum Power Programmer for California: Adds up to 131HP, Improves Throttle Response (Part No.3050)
from
$399.99
The Max Energy Spectrum Power Programmer delivers more power-per-dollar than any other bolt-on on the market today. Plus, it installs in less than 15 minutes without using tools or getting your hands dirty. Our award-winning Power Tuning adds maximum horsepower, torque, and performance for any kind of driving for vehicles using regular, premium, E85, as well as diesel fuel. The Max Energy Spectrum also has a larger backlit LCD screen for quick and easy setup and user-friendly navigation for simple installation, tuning, and feature options.
Product Features:
See More
Product Features:
- Optimized engine tuning
- Adjustable rev limiter/speed limiter
- Speedometer correction for multiple tire sizes and gear ration changes
- Adjustable shift firmness and shift points
- Throttle adjustments
- Cooling fan on/off temperatures
- Return back to factory settings
- Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
- Internet updateable
Diablosport – i3 (Part No.8145)
from
$79.99
i3
Top-Rated Performance and Racing Products Brands For Your 2011 Ford Mustang
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2011 Ford Mustangs. Below you’ll find some of our best rated Performance and Racing Products from SCT Performance, K&N, and Spectre, and more. Performance and Racing Products from these brands that fit a 2011 Mustang start at just $209.99 and are rated as high as 5.0 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular SCT Performance 2011 Ford Mustang Performance and Racing Products
When it comes to maintaining or upgrading your 2011 Ford Mustang, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. SCT Performance ticks all of those boxes. We offer a wide selection of SCT Performance Performance and Racing Products, specifically designed for the 2011 Ford Mustang. With over 1 SCT Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $399.99. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our SCT Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$399.99
(1)
Preloaded Performance Programmer for Increased Horsepower & Torque
“I love this tuner. My car has felt like it really woke up when I installed some of the preset tunes in it. It amazes me that they have preset tunes fo”
Popular K&N 2011 Ford Mustang Performance and Racing Products
K&N auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2011 Ford Mustang owner should feel confident when installing genuine K&N parts in their vehicle. To ensure the best fit and performance for your 2011 Mustang, Advance Auto Parts carries a full inventory of 2 K&N Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these K&N Performance and Racing Products range up to $419.99, plus, with more than 6 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$419.99
(1)
Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter
“Excellent fit and definite HP gain when combined with custom tune. Took only an hour to install and was worth every penny. Looks amazing under the ho”
from
$419.99
(5)
Cold Air Intake: Adds Up To 20 Horsepower, With Washable Air Filter
“This intake is great! You definitely notice a difference from the factory to the K&N Cold Air intake also you get a more aggressive sound when you put”
FAQs for 2011 Ford Mustang Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2011 Ford Mustangs?
Out of 55 Performance and Racing Products that fit 2011 Ford Mustangs, the following parts are the top sellers:
- Preloaded Performance Programmer for Increased Horsepower & Torque (11844157) – $399.99
- Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size (12452493) – $239.99
- Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (11907375) – $456.99
What’s the price range for 2011 Ford Mustang Performance and Racing Products?
Performance and Racing Product prices for the 2011 Ford Mustang start at $23.79 and go up to $2,504.00 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2011 Ford Mustang?
The average price for Performance and Racing Products for the 2011 Ford Mustang is $357.01. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Ford Mustang model years?
What are the cheapest Performance and Racing Products for my 2011 Ford Mustang?
The cheapest 2011 Ford Mustang Performance and Racing Products we carry in stock are:
- M/TShftBshngKt (10600136) – $23.79
- M/TShftBshngKt (10600095) – $23.79
- 1 Spring (50287844) – $28.99
- ENGINE ROCKER ARM (50272511) – $29.99
- ENGINE ROCKER ARM (50272430) – $61.99
What are the top-rated Performance and Racing Products that fit the 2011 Ford Mustang?
Out of 12 reviews by customers, our 2011 Ford Mustang Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2011 Ford Mustang and their top-rated products:
- Programmers
- Preloaded Performance Programmer for Increased Horsepower & Torque (11844157) – $399.99
- Performance Air Intake Kits
- Preloaded Performance Programmer for Increased Horsepower & Torque (11844157) – $399.99
What types of Performance and Racing Products do you sell for my 2011 Ford Mustang?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 2011 Ford Mustang:
Can I get help with 2011 Ford Mustang Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.
What is your return policy for Ford Mustang Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Ford Mustang Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
