2011 Ford Mustang Performance Air Intake Kits

Edelbrock Competition Air Intake Kit No. 15868 is designed for use on 2015-2017 Ford Mustangs with the Edelbrock Supercharger kit and modular inlet. This intake kit features a sealed airbox design with a fresh air inlet that reduces restriction at the front of the supercharger inlet resulting in a 41 horsepower increase. A larger 95mm MAF housing increases the range of OEM MAF sensors to provide more room to grow over the stock airbox assembly.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

The AIRAID MXP Air Intake System represents the ultimate in AIRAID cold air induction systems And provides higher levels of horsepower And acceleration gains for high-performance gas And diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow And filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings And calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on And go! These air intake systems are backed by AIRAID’s No Hassle limited lifetime warranty. Some AIRAID air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the product’s vehicle applications to determine the legal status for each vehicle.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Edelbrock Part No. 15828 Edelbrock Competition Air Intake kit provides the increased airflow needed for 2010 Mustang GT racing applications. It includes a high flow Mass airflow Sensor, 7.85in. long reusable open element filter, plastic shroud and all necessary hardware for installation.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

“6”” Flange Massive Air Filter: This intake system utilizes a pre-oiled, 7″” tall inverted top conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Dyno-Tuned Carbon Fiber Intake Tube: Lightweight, high gloss, clear-coated twill weave carbon fiber tube to achieve maximum power gains while maintaining a perfect fit. One-Piece Heat Shield: Lightweight aluminum Powder-coated black One-piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation. Hassle-Free Installation: All clamps, reinforced coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.”

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

The K&N DRYFLOW Air Intake System replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The DRYFLOW Air Intake System features an oil-free synthetic filter media providing increased airflow and exceptional engine protection without requiring oil. This allows cooler, denser air to be directed through a custom intake tube into the engine’s throttle body for a guaranteed power gain. The system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes.

Edelbrock Part No: 15803 Edelbrock Competition Air Intake kit provides the increased airflow needed for 2005-09 Mustang GT racing applications. Includes a 7.85in. long reusable open element filter, plastic shroud and all necessary hardware for installation. This kit is intended for use when upgrading from system No: 1580, which already includes a MAF sensor.

The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems And delivers higher levels of horsepower And acceleration gains for high-performance gas And diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow And filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings And calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on And go! Some AIRAID air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the product’s vehicle applications to determine the legal status for each vehicle.

The K&N 57-2511 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Ford Mustang models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-2511 air intake comes with a K&N high-flow air filter that installs into the previous air box space. Air is directed through the air filter, past the factory mass air sensor and into the engine’s throttle body for a guaranteed power gain. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems And delivers higher levels of horsepower And acceleration gains for high-performance gas And diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow And filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings And calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on And go! Some AIRAID air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the product’s vehicle applications to determine the legal status for each vehicle.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems. It delivers high levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. This air intake includes a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID oiled premium air filter for outstanding air flow and filtration. Air is directed through an air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This all adds up to a sophisticated system that increases air flow. This air intake requires custom tuning and is not legal for sale or use in California or in other states adopting California emission standards.