2011 Ford F-150 Cooling and Climate Controls

Name: HVAC Blower Motor Resistor
Brand: Carquest Premium
SKU: RUA1031
Price: 75.99 USD

Below you will find various in-demand Ford Cooling and Climate Controls, components and accessories for your 2011 F-150. Advance Auto Parts has popular F-150 parts like Blower Motor and Related Products, Air Conditioning Parts, Blend Doors and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other F-150 model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2011 Ford F-150 Cooling and Climate Controls below and start saving instantly.

Popular 2011 Ford F-150 Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Engine Cooling Fan Controllers

Radiator Fan Clutch

AC Replacement Kits

Radiator Caps

AC Compressor Without Clutch

Thermostats

Climate Control Modules

Heater Blend Door Control Motors

Engine Cooling Fans

Radiator Fan Motors

Thermostat and Water Outlet Assemblies

Air Blend Door Actuators

Coolant Reservoirs

AC Compressor Relays

AC Condenser and Receiver Drier Assemblies

Heater Cores

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Engine Coolant Pipe O-Rings

Blower Motor Resistors

AC Harness Connectors

Air Conditioning Relays

AC Condensers

AC Compressor Cut-Out Relays

Radiator Support Baffle Clips

AC Evaporators

AC Caps and Valve Core Kits

Radiator Support Covers

Thermostat Housing Gaskets

Blower Motor Wheels

Thermostat Housings

AC Relay Connectors

AC Receiver Drier Desiccant Elements

Thermostat Seals

Accumulator and Receiver Driers

ABS Speed Sensors

Thermostat and Water Outlet Gaskets

AC Discharge Lines

AC Suction Lines

Blower Motor Resistor Connectors

Water Pump Gaskets

AC Hose Assemblies

AC Clutch Cycle Switches

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

AC Compressor Control Valves

Radiator Drain Plugs

AC Compressor Cut-Off Switches

AC Pressure Transducer Connectors

Radiator Support Air Deflectors

Radiator Support Tie Bars

Engine Coolant Outlet Seals

AC Compressor Clutch Connectors

Thermostat Housing O-Rings

AC Refrigerant Pressure Sensors

AC Compressor Clutch Shims

AC Service Valve Caps

Radiator Cap Tester Adapters

Radiator Cap Adapters

Water Pump Housing O-Rings

AC Clutch Pulleys and Rims

AC Service Valve Cores

Radiator Support Splash Shields

HVAC Temperature Control Switch Connectors

A/C Compressor Clutch Drive

Essential Cooling and Climate Controls for 2011 Ford F-150s

from

$75.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$25.99

Compatible with both R12 And R134a refrigerants; All the seals needed to complete the job; SUV And rear air applications; Application specific

from

$99.99

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$89.99

Product Features:

Designed, tested, and built by application
OE performance, fit, and appearance
Precision machined
Out of box installation

from

$32.99

Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$60.99

HVAC DFRST MD DR ACT

from

$249.99

As one of the world’s largest OE suppliers of A/C compressors, DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO, we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors, you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:

DENSO is the world’s largest OE supplier of A/C compressors
Each compressor is precision manufactured for exact replacement
Designed for high output and extended durability
Highest quality in the Aftermarket

from

$46.38

A/C Relief Valve

from

$102.74

A/C Expansion Valve

from

$42.87

Air Inlet Door Actua

from

$19.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$84.56

Motorcraft ABS wheel speed sensors are designed for use with electronic systems in Ford and Lincoln vehicles.

Product Features:

They work with various systems, including Anti-Lock Brake System (ABS)
Recommended by Ford Motor Company

from

$73.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$250.36

A/C Hose

from

$18.99

This 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles.
Ideal solution – this socket is a reliable replacement for an original socket that is damaged or has failed due to fatigue or electrical malfunction.
Durable construction – this socket is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.79

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$18.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$313.99

Climate controls stopped working? Seamlessly restore operation by easily swapping the malfunctioning original module with this fully tested replacement unit.

Product Features:

Direct replacement – this HVAC control module matches the appearance and function of the original unit on specific vehicles.
Functionality-tested – module has been tested to ensure the same operation as the stock module.
Simple installation – no advanced vehicle knowledge is required for proper installation and setup
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$20.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$15.49

from

$24.99

New Standard Replacement Upper Radiator Support Cover, Sight Shield

Product Features:

Sight Shield, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$25.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$25.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Galvanized steel construction
Meets all requirements of international standard ISO 140
Suitable for a wide variety of applications
Set screw installation

from

$18.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$36.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$14.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Manufactured for the sealing repair environment
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$38.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Upgrade your 2011 Ford F-150 with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2011 Ford F-150, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Cooling and Climate Controls are key to keeping your F-150 functioning at its best. At Advance Auto Parts, we offer a wide selection of 196 Cooling and Climate Controls for the 2011 Ford F-150, designed to meet your needs without breaking the bank. From Blower Motor and Related Product replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2011 Ford F-150 at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $4.05 to $713.02, with an average price of $96.94. Our 196 Cooling and Climate Controls in stock come from 24 trusted brands, so you’re sure to find the right part for your 2011 Ford F-150 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Ford F-150, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, FELPRO, Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. FELPRO and Carquest Premium also bring quality to the table, with Cooling and Climate Controls available starting at $5.79, and at an average 5 stars rating. With 15,165 customer reviews and counting, our 2011 Ford F-150 Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 Ford F-150 is always ready to roll. We’re committed to providing you with everything you need to keep your F-150 in top shape, all in one place. Start shopping confidently below for your 2011 Ford F-150!

Best-Selling Blower Motor and Related Products for 2011 Ford F-150s

Enhance the driving experience in your Ford with 12 quality Blower Motor and Related Product components, starting at $32.49.

show more show less

from

$169.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$53.99

Fan motor no longer working properly? This blower motor resistor connector is designed to replace an original equipment connector damaged by corrosion or overheating. Corrosion-resistant terminals ensure reliable performance.

Product Features:

Ideal replacement – this complete blower motor resistor connector assembly is a direct replacement for this vehicle application.
Damage-resistant – the connector assembly is engineered to impede corrosion and heat damage
Complete repair solution – includes pre-assembled wiring harness/pigtail and connector terminal
Excellent value – this part offers original equipment quality without the cost and hassle of replacing the entire wiring harness

from

$70.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Each of our blower motor resistors is made from high quality ceramics with copper electrical connectors to ensure accurate and precise resistance values for long life and high performance.
Robust design and high grade materials meet the stringent demands of today’s service professional
All of our switches are made to OE spec to ensure proper fit, form and function

from

$32.49

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$91.99

This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models.
Complete kit – each kit comes with a resistor and harness pigtail, which is essential for most repairs.
Restores functionality – made to perform like original equipment to restore full HVAC operation
Trustworthy quality – backed by team of engineers and quality specialists in the USA

from

$75.99

from

$66.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$39.26

Blower Motor Wheel

from

$83.93

Blower Motor Resisto

from

$76.99

from

$58.97

The Vemo Blower Motor Resistor is manufactured to meet or exceed the OE specifications for performance, fit and function.

Product Features:

Excellent electrical and thermal performance
Direct OE replacement
Built to strict quality control standards
100% tested

from

$54.17

When servicing air HVAC systems, choose Motorcraft climate-control components. They offer quality at a great value and are the only climate-control components recommended by Ford Motor Company.

Product Features:

All parts meet original equipment requirements for fit, finish and durability
Specifically engineered for Ford and Lincoln vehicles
Durability tested to meet demanding original equipment service life specifications
Helps maintain original performance standards

Most Popular 2011 Ford F-150 Air Conditioning Parts

Customize your Ford with 72 Air Conditioning Parts products like AC Compressor Without Clutch, AC Compressor With Clutch, and Expansion Valve and Orifice Tubes, all priced under $713.02.

show more show less

from

$45.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$18.99

Direct replacement – this 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles.
Ideal solution – this socket is a reliable replacement for an original socket that is damaged or has failed due to fatigue or electrical malfunction.
Durable construction – this socket is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$238.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$23.29

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

from

$25.99

Compatible with both R12 And R134a refrigerants; All the seals needed to complete the job; SUV And rear air applications; Application specific

from

$341.99

Carquest Standard Remanufactured Compressors are manufactured to meet original equipment specifications. All components are either remanufactured to strict standards or are replaced with new components to ensure performance and durability. All compressors are 100% end of line tested.

Product Features:

O-Rings and gaskets necessary for installation are included.
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$132.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$18.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$19.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$400.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Matched high-quality needle-roller bearing ensures low friction and high load capability.
Light weight aluminum energy-saving casting used for construction.

from

$20.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$45.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$21.99

from

$99.99

New Platinum Pro A/C Condenser

Product Features:

Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$83.99

New Platinum Pro A/C Condenser, For Models With Electric Power Steering

Product Features:

For Models With Electric Power Steering, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$109.77

When servicing air conditioning systems, choose Motorcraft climate-control components. They offer quality at a great value and are the only climate-control components recommended by Ford Motor Company.

Product Features:

All parts meet original equipment requirements for fit, finish and durability
Specifically engineered for Ford and Lincoln vehicles
Durability tested to meet demanding original equipment service life specifications
Helps maintain original performance standards

from

$472.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$486.99

Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators are helium leak tested prior to packaging.
Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
The specific PAG oil required by your vehicle application is included.
O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.

from

$298.99

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$85.54

A/C Compressor Clutc

from

$566.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators are helium leak tested prior to packaging.
Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
The specific PAG oil required by your vehicle application is included.
O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.

from

$199.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$713.02

Motorcraft manufactures a new A/C Compressor with clutch assembly that is the same quality fit and performance of the OE compressor it replaces.

Product Features:

New compressors are the same components that were installed in the vehicle when it rolled off the assembly line
Loaded compressors include:
Clutch pulley and coil for easy ordering (most assemblies are pre-charged with PAG refrigerant oil)
Pre-shimmed clutch/pulley assemblies to provide direct bolt-in installation
Forged-Aluminum Pistons – For maximum life in low-lubrication, high-temperature conditions
Tin-Coated Swashplates – For added strength and durability
Rubber-Dampened Clutch – To minimize clutch noise during engagement
Pre-shimmed Clutch Assembly – To help make installations easier on loaded compressors
Dual Center-Seam Seals – For additional leak protection

from

$542.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators are helium leak tested prior to packaging.
Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
The specific PAG oil required by your vehicle application is included.
O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.

from

$354.99

O-Rings and gaskets necessary for installation are included.
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$59.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$40.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$40.99

Direct replacement – this 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles.
Ideal solution – this socket is a reliable replacement for an original socket that is damaged or has failed due to fatigue or electrical malfunction.
Durable construction – this socket is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$457.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$463.99

New Standard Replacement A/C Compressor, Model DKS20, 6 Groove

Product Features:

Model DKS20, 6 Groove
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$210.77

Like all DENSO First Time Fit® A/C components, our condensers are designed and manufactured to integrate seamlessly with the vehicle’s original air conditioning system. DENSO condensers match up to OE condensers at every benchmark. Multiflow, subcooling, and the latest Ssrpentine condenser styles are offered to provide the optimum configuration for each application. Premium aluminum construction improves reliability, resisting corrosion to avoid expensive system leaks, while the superior fin wave design offers higher heat transfer and maximum refrigerant condensation. Heat exchanger cores are specially designed to shed airborne material buildup, allowing the A/C system to operate at peak efficiency with minimal maintenance, assuring years of trouble-free service.

Product Features:

Zinc diffusion layer improves corrosion resistance
Unique fin design to minimize airflow blockage
High performance design reduces the required compressor power
System Efficiency: Superior fin waves provide a higher heat transfer coefficient and full condensation.
Engineered to Perfection: OE quality engineered for unparalleled performance
Exact Fit: Condensers install with speed and ease
Reduces required compressor power, resulting improved fuel economy
Restores A/C performance to as-new condition
First Time Fit® assures bolt-in replacement; no brackets or adapters
Greater Durability: Pure aluminum construction provides greater resistance for corrosion

from

$90.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$80.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$19.54

A/C Compressor Clutc

from

$81.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$88.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$39.99

Carquest A/C Accessories provide a comprehensive offering of premium quality fittings and tools to service all aspects of an a/c service from the most simple fitting replacement to complex diagnostics required for late model applications.

from

$42.68

Drier Desiccant Elem

from

$665.52

Motorcraft manufactures a new A/C Compressor with clutch assembly that is the same quality fit and performance of the OE compressor it replaces.

Product Features:

New compressors are the same components that were installed in the vehicle when it rolled off the assembly line
Loaded compressors include:
Clutch pulley and coil for easy ordering (most assemblies are pre-charged with PAG refrigerant oil)
Pre-shimmed clutch/pulley assemblies to provide direct bolt-in installation
Forged-Aluminum Pistons – For maximum life in low-lubrication, high-temperature conditions
Tin-Coated Swashplates – For added strength and durability
Rubber-Dampened Clutch – To minimize clutch noise during engagement
Pre-shimmed Clutch Assembly – To help make installations easier on loaded compressors
Dual Center-Seam Seals – For additional leak protection

from

$442.99

New Standard Replacement A/C Compressor, FS20, 6 Groove

Product Features:

FS20, 6 Groove
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$408.00

A/C Compressor

from

$348.17

All parts meet original equipment requirements for fit, finish and durability
Specifically engineered for Ford and Lincoln vehicles
Durability tested to meet demanding original equipment service life specifications
Helps maintain original performance standards

from

$344.30

A/C Compressor

from

$314.01

A/C Compressor

from

$250.36

A/C Hose

from

$188.80

Motorcraft ABS wheel speed sensors are designed for use with electronic systems in Ford and Lincoln vehicles.

Product Features:

They work with various systems, including Anti-Lock Brake System (ABS)
Recommended by Ford Motor Company

from

$143.81

Motorcraft ABS wheel speed sensors are designed for use with electronic systems in Ford and Lincoln vehicles.

Product Features:

They work with various systems, including Anti-Lock Brake System (ABS)
Recommended by Ford Motor Company

from

$141.99

New Standard Replacement A/C Evaporator Core, V6 Engine

Product Features:

V6 Engine, Made Of Aluminum delete
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Top Picks for 2011 Ford F-150 Blend Doors

Upgrade Ford F-150s with top-quality Blend Doors parts, including 8 OEM and aftermarket selections for your 2011 model.

show more show less

from

$37.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$25.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$26.49

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$60.99

HVAC DFRST MD DR ACT

from

$44.99

HVAC BLEND DOOR ACT

from

$42.87

Air Inlet Door Actua

from

$42.62

Air Flap Actuator

from

$30.91

Dorman-engineered with robust materials to improve durability and performance, our HVAC Heater Blend Door Actuators restore and maintain proper functioning of the HVAC Heater Blend Door. Depending on the make and model of your vehicle, the same exact actuator could be suitable for any and all climate control blend door applications – consult Dorman’s website for specific information.

Product Features:

Direct replacement for a proper fit every time
Recommended for replacement during blend door replacement
High quality plastic housing and motor/circuit board included
Dorman’s quality testing ensures year after year of trouble-free service

In-Demand Heating Parts for 2011 Ford F-150s

Select from 2 premium Heating Parts parts for your 2011 Ford F-150, with prices ranging from $140.99 to $217.99.

show more show less

from

$140.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$217.99

HVAC HEATER CORE

Most Sold 2011 Ford F-150 Engine Cooling Parts

Explore our best-selling Ford parts for the 2011 F-150 among 101 OEM and aftermarket options starting from $4.05.

show more show less

from

$14.29

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. With the enlarged Orpheus opening, this high flowing thermostat will allow for more gallons per second to flow. This will allow for the engine to cool down at a faster rate compared to the OE to allow for quick and precise cooling for your engine. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

Larger opening for increased coolant flow
Increased strength and durability
High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
100% tested and calibrated

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$15.79

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$18.29

This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$12.49

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. With the enlarged Orpheus opening, this high flowing thermostat will allow for more gallons per second to flow. This will allow for the engine to cool down at a faster rate compared to the OE to allow for quick and precise cooling for your engine. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

Larger opening for increased coolant flow
Increased strength and durability
High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
100% tested and calibrated

from

$185.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$194.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$29.99

New Standard Replacement Driver Side Radiator Support Air Deflector

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$6.99

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$13.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$9.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$121.99

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$9.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Each thermostat gasket is built to Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$15.99

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$15.79

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$101.99

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation

from

$216.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$9.79

Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$139.99

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$21.99

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$92.99

Electric fan with 16″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
16″ diameter
1,400 CFM
Use as a pusher or puller fan

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$79.99

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$5.79

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$94.99

Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$9.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$99.99

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$25.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$23.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$38.49

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Preset thermostatic fan control
185°F preset
For use with Imperial electric fans
Probe installs into radiator fins

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$15.79

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$26.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$18.29

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$25.99

This coolant O-ring kit contains all the necessary O-rings to replace or repair the engine coolant pipe on specified vehicles.

Product Features:

Cost-effective repair – this kit allows you to directly replace coolant tee and radiator hose O-rings.
Complete set – includes two large and one small O-ring.
Application specific – strictly designed for certain Ford F150 and Mustang model years
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$5.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$238.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
Ideal solution – engineered for a seamless installation.
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$154.22

Motorcraft gas and diesel engine water pumps contain a precision bearing to help deliver a long and efficient performance. Additionally, stamped or cast impellers meet OE pumping requirements.

Product Features:

Seal designs use sintered metal or ceramic seats
Strong cast-iron or aluminum die-cast housings
Bearing housing meets OE load requirements
Precision-ground bearings
Hubs located for proper belt alignment
Includes installation gasket

from

$175.98

Seal designs use sintered metal or ceramic seats
Strong cast-iron or aluminum die-cast housings
Bearing housing meets OE load requirements
Precision-ground bearings
Hubs located for proper belt alignment
Includes installation gasket

from

$298.99

Product Features:

Designed, tested, and built by application
OE performance, fit, and appearance
Precision machined
Out of box installation

from

$194.99

This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$215.99

New Platinum Pro Radiator, 3.7 Liter And 5.0 Liter Engine, With Standard Cooling

Product Features:

3.7 Liter And 5.0 Liter Engine, With Standard Cooling, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$212.43

Seal designs use sintered metal or ceramic seats
Strong cast-iron or aluminum die-cast housings
Bearing housing meets OE load requirements
Precision-ground bearings
Hubs located for proper belt alignment
Includes installation gasket

from

$146.99

New Platinum Pro Radiator And Condenser Fan Assembly, 3.5/3.7/4.6/5.0/5.4/6.2 Liter Engines

Product Features:

3.5/3.7/4.6/5.0/5.4/6.2 Liter Engines, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$271.99

ENGINE WATER PUMP

Top-Rated Cooling and Climate Controls Brands For Your 2011 Ford F-150

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2011 Ford F-150s. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, FELPRO, and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 2011 F-150 start at just $5.79 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2011 Ford F-150 Cooling and Climate Controls

When it comes to maintaining or upgrading your 2011 Ford F-150, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2011 Ford F-150. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

Popular FELPRO 2011 Ford F-150 Cooling and Climate Controls

FELPRO auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2011 Ford F-150 owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 2011 F-150, Advance Auto Parts carries a full inventory of 11 FELPRO Cooling and Climate Controls. Plus you will be keeping your Ford in peak condition while saving money because prices on these FELPRO Cooling and Climate Controls range from $5.79 to $26.49, plus, with more than 131 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$7.79

This product is not rated

Engine Coolant Thermostat Housing Gasket

“”

from
$14.79

This product is not rated

Engine Water Pump Gasket

“”

from
$5.79

This product is not rated

THERMOSTAT GASKET

“”

FAQs for 2011 Ford F-150 Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2011 Ford F-150s?

Out of 196 Cooling and Climate Controls that fit 2011 Ford F-150s, the following parts are the top sellers:

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
Multi-Purpose O-Ring (5180902) – $9.99
HVAC Blower Motor Resistor (12450075) – $32.49

What’s the price range for 2011 Ford F-150 Cooling and Climate Controls?

Cooling and Climate Control prices for the 2011 Ford F-150 start at $4.05 and go up to $713.02 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2011 Ford F-150?

The average price for Cooling and Climate Controls for the 2011 Ford F-150 is $96.94. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Ford F-150 model years?

Yes, we currently carry Cooling and Climate Controls for 32 model years of Ford F-150s between 1977 and 2025. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Cooling and Climate Controls for my 2011 Ford F-150?

The cheapest 2011 Ford F-150 Cooling and Climate Controls we carry in stock are:

Water Outlet Gasket (12591961) – $4.05
Water Outlet Gasket (11947528) – $4.05
Ford Radiator Core Support Retainer (11910897) – $4.49
Thermostat O-Ring (11868422) – $4.55
Thermostat O-Ring (11868262) – $4.76

What are the top-rated Cooling and Climate Controls that fit the 2011 Ford F-150?

Out of 15,165 reviews by customers, our 2011 Ford F-150 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2011 Ford F-150 and their top-rated products:

Blower Motor and Related Products
- Blower Motor: With Wheel (10441415) – $169.99
- Blower Motor Resistor Harness (10721438) – $53.99
- HVAC Blower Motor Resistor (11322844) – $70.05
Engine Cooling Parts
- Blower Motor: With Wheel (10441415) – $169.99
- Blower Motor Resistor Harness (10721438) – $53.99
- HVAC Blower Motor Resistor (11322844) – $70.05

What types of Cooling and Climate Controls do you sell for my 2011 Ford F-150?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2011 Ford F-150:

Can I get help with 2011 Ford F-150 Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Cooling and Climate Controls and more.

What is your return policy for Ford F-150 Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Ford F-150 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2011 Ford F-150 Cooling and Climate Controls

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1031)

Factory Air – Cap and Valve A/C System Seal Kit (Part No.26780)

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Carquest Premium – Reverse Rotation Severe Duty Thermal Fan Clutch (Part No.215111)

Motorad – Thermostat Kit: Includes Housing, Thermostat and Seal, 194 Degrees (Part No.5002KT)

Motorcraft – HVAC DFRST MD DR ACT (Part No.YH-1881)

DENSO – New Compressor With Clutch (Part No.471-8121)

Motorcraft – A/C Relief Valve (Part No.R1028680239MTR)

Motorcraft – A/C Expansion Valve (Part No.R10451155653MTR)

Motorcraft – Air Inlet Door Actua (Part No.R2054680883MTR)

Carquest Premium – A/C Compressor Clutch Connector (Part No.PTA1582)

Motorcraft – Motorcraft ABS Speed Sensor (Part No.N6030427686MTR)

Carquest Premium – A/C Discharge and Suction Line Hose Assembly (Part No.T56206)

Motorcraft – A/C Hose (Part No.R1020517597MTR)

Dorman – Power Outlet Socket (Part No.926-330)

Carquest Premium – Standard Thermostat: 195 Degrees (Part No.13779)

Factory Air – System Mounted Cycling Pressure Switch (Part No.36485)

Dorman – Remanufactured Climate Control Module (Part No.599-172)

Carquest Premium – A/C Clutch Cycle Switch Connector (Part No.PTA1128)

Carquest Premium – A/C Clutch Cycle Switch (Part No.ACA1519)

KAI – Radiator Support Cover (Part No.FO1228129)

Carquest Premium – A/C Filter Drier (Part No.T33367)

Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35608)

Carquest – Multi Purpose Relay (Part No.83A1001)

Carquest Premium – HVAC Temperature Control Switch Connector (Part No.PTA2069)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Felpro – Engine Water Pump Gasket (Part No.36082)

Carquest Premium – A/C Compressor Clutch Connector (Part No.PTA1065)

Carquest Premium – Blower Motor: With Wheel (Part No.75873)

Dorman – Blower Motor Resistor Harness (Part No.645-403)

Carquest – HVAC Blower Motor Resistor (Part No.RU1582)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1003)

Dorman – Blower Motor Resistor Kit With Harness (Part No.973-399)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1031)

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.PTC1119)

Motorcraft – Blower Motor Wheel (Part No.R2039680691MTR)

Autopart International Inc – Blower Motor Resisto (Part No.R20322076894API)

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.PTA3025)

Vemo – Blower Motor Resistor (Part No.R2032300864VMO)

Motorcraft – Motorcraft Blower Motor Resistor (Part No.R2032300864MTR)

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39356)

Dorman – Power Outlet Socket (Part No.926-330)

Carquest Premium – A/C Parallel Flow Condenser with Drier (Part No.1181)

Carquest – A/C and Heater Relay (Part No.R3177)

Factory Air – Cap and Valve A/C System Seal Kit (Part No.26780)

Carquest Standard – A/C Remanufactured; w/ Clutch; w/ FS20 Compressor (Part No.DW67192)

Carquest Premium – A/C Evaporator Parallel Flow (Part No.T64017)

Carquest – Multi Purpose Relay (Part No.83A1001)

Carquest Premium – Multi Purpose Relay (Part No.RAA1234)

Carquest Premium – A/C New, with Clutch, with FS20 Compressor (Part No.T68192)

Carquest Premium – A/C Clutch Cycle Switch Connector (Part No.PTA1128)

Carquest Premium – A/C Desiccant Cartridge Kit (Part No.T83349)

Carquest Premium – Multi Purpose Relay (Part No.RAA1751)

KAI – A/C Condenser (Part No.CNDDPI3618)

KAI – A/C Condenser (Part No.CND3975)

Motorcraft – A/C Pressure Switch (Part No.R10541362210MTR)

Carquest Premium – A/C New, with Clutch, with DKS20 Compressor (Part No.T168660)

Carquest Premium – A/C Compressor and Component Kit (Part No.5178K)

Carquest Standard – Reman York-Diesel Kiki-Zexel-Seltec DKS20 Compressor w/ Clutch (Part No.DW167662)

Motorcraft – A/C Compressor Clutc (Part No.R1199680513MTR)

Carquest Premium – A/C Compressor and Component Kit (Part No.7213K)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713975)

Motorcraft – A/C Compressor (Part No.R10002575905MTR)

Carquest Premium – A/C Compressor and Component Kit (Part No.7208K)

Carquest Standard – A/C Remanufactured; w/ Clutch; w/ DKS20 Compressor (Part No.DW167660)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC1257)

Carquest Premium – A/C Compressor Clutch Connector (Part No.PTA1369)

Dorman – Power Outlet Socket (Part No.926-331)

Carquest Premium – A/C New, with Clutch, with DKS20 Compressor (Part No.T168662)

KAI – A/C Compressor (Part No.ACP013166)

DENSO – First Time Fit A/C Conr (Part No.R1030687969ND)

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T56894)

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T56913)

Motorcraft – A/C Compressor Clutc (Part No.R1202680526MTR)

Carquest Premium – ABS sensor (Part No.ARC1223)

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56899)

Carquest Premium – A/C System Mounted Pressure Transducer (Part No.T37340)

Four Seasons – Drier Desiccant Elem (Part No.R1043360663AIR)

Motorcraft – A/C Compressor w/ Clutch, New (Part No.R1000511416MTR)