2018 Ford F-150 Cooling and Climate Controls

Name: HVAC Blend Door Actuator
Brand: Carquest Premium
SKU: DLC2736
Price: 49.99 USD

Below you will find various in-demand Ford Cooling and Climate Controls, components and accessories for your 2018 F-150. Advance Auto Parts has popular F-150 parts like Heating Parts, Blend Doors, Engine Cooling Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other F-150 model years including 2014, 2015, 2016, 2017, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2018 Ford F-150 Cooling and Climate Controls below and start saving instantly.

Popular 2018 Ford F-150 Cooling and Climate Controls Categories

Radiators

Water Pumps

AC Compressor With Clutch

Thermostat and Water Outlet Assemblies

Air Blend Door Actuators

Coolant Temperature Sensors

Heater Cores

Coolant Reservoir Caps

Water Outlets

Engine Coolant Pipe O-Rings

AC Condensers

Thermostat Housings

Thermostat Seals

AC Compressor Cut-Out Relay Harness Connectors

ABS Speed Sensors

Thermostat and Water Outlet Gaskets

Water Pump Gaskets

Expansion Valve and Orifice Tubes

Radiator Shutter Assemblies

Radiator Drain Plugs

Coolant Outlet Flanges

AC Compressor Cut-Off Switches

Radiator Support Tie Bars

Engine Coolant Outlet Seals

AC Compressor Clutch Connectors

AC Refrigerant Pressure Sensors

AC Service Valve Caps

Engine Coolant Bypass Pipe O-Rings

Water Pump Housing O-Rings

Engine Coolant Pipe Seals

AC Receiver or Drier

Thermostat Shims

Essential Cooling and Climate Controls for 2018 Ford F-150s

from

$49.99

The heating-ventilation-air-condition (HVAC) air distribution system is designed to control the movement of air in the HVAC air distribution assembly as well as control the interior cabin temperature. Actuator doors which may be mechanically or electrically operated with a motor allow air movement through the system to provide the vehicle occupants the requested temperature desired for comfort.

Product Features:

100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate operation providing product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$749.99

New Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor.

Product Features:

Every unit is 100% function and leak tested
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Very low friction coating used on swash plate to improve durability
PTFE coated pistons improve performance and reduce wear
Rubber dampened clutch plate ensures smooth clutch engagement and reduces wear
Matched high-quality needle-roller bearing ensures low friction and high load capability
Limited Warranty when following warranty requirements: Flush A/C System, replace accumulator/receiver dryer, replace orifice tube/expansion device, and filling with correct oil and refrigerant
New Compressors meet or exceed OE specifications
New Compressors are validated for the equivalent of 100,000 miles
New Compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
New Compressors come with direct fit connectors for ease of installation and to help eliminate splicing
New Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor

from

$20.79

We are proud to offer this Carquest product line: Carquest Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable))
Coated with corrosion and rust inhibitor
100% leak tested
Direct-fit replacement for ease of installation
Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable)
Coated with corrosion and rust inhibitor
100% leak tested
Direct-fit replacement for ease of installation

from

$23.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$20.49

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$34.99

Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested.

Product Features:

Easy, one step fit and installation
No special tools required
Meets or exceeds all OEM standards

from

$6.99

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$16.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$765.99

This radiator shutter assembly matches the fit and function of the original equipment shutter to restore function to the vehicle’s active grille shutter system. This assembly features a factory-style connector for a plug-and-play installation.

Product Features:

Ideal replacement – this active grille shutter and motor assembly precisely matches the original equipment assembly on specific makes and models
Plug & play installation – this grille shutter assembly is made with a factory-style electrical connector for a trouble-free installation
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

from

$784.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
Complete package – assembly is designed with the same materials and components as the original part
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$99.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$26.49

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$8.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$21.99

Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$382.99

Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators are helium leak tested prior to packaging.
Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
The specific PAG oil required by your vehicle application is included.
O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.

from

$6.99

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$10.99

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$16.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Manufactured for the sealing repair environment
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$23.99

Edelbrock #7253 Engine Water Pump Gasket Set Ford 289-302. Is it time to rebuild your Edelbrock mechanical water pump? No problem– these Edelbrock water pump gaskets will keep your water pump leak-free. They are manufactured from quality materials and ca

Product Features:

Composite Material
1-Back Plate To Timing Cover
1-Water Pump To Timing Cover
2-Back Plate To Water Pump
For Early SB Ford

from

$6.79

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$25.49

Edelbrock part No. 48143 Waterneck is designed for use with small-block Ford V8 engine applications. This Black water neck is a great way to finish off your engine. It features a 15 deg. neck and O-ring design for an improved seal, which also allows for removal without requiring a new gasket. Fits any 1-1/2″ diameter outlet hose.

from

$50.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$99.99

New Platinum Pro A/C Condenser

Product Features:

Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$22.99

Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$234.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$10.99

Each thermostat gasket is built to Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$53.99

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$19.99

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

Upgrade your 2018 Ford F-150 with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2018 Ford F-150, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Cooling and Climate Controls are key to keeping your F-150 functioning at its best. At Advance Auto Parts, we offer a wide selection of 75 Cooling and Climate Controls for the 2018 Ford F-150, designed to meet your needs without breaking the bank. From Heating Part replacements to Blend Doors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2018 Ford F-150 at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $4.99 to $766.99, with an average price of $133.93. Our 75 Cooling and Climate Controls in stock come from 10 trusted brands, so you’re sure to find the right part for your 2018 Ford F-150 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2018 Ford F-150, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like FELPRO, Carquest Premium, Mahle, and more. FELPRO Cooling and Climate Controls start at just $7.99 and boast an impressive 4.6 stars average rating from customers. Carquest Premium and Mahle also bring quality to the table, with Cooling and Climate Controls available starting at $5.99, and at an average 4.4 stars rating. With 967 customer reviews and counting, our 2018 Ford F-150 Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2018 Ford F-150 is always ready to roll. We’re committed to providing you with everything you need to keep your F-150 in top shape, all in one place. Start shopping confidently below for your 2018 Ford F-150!

Best-Selling Heating Parts for 2018 Ford F-150s

Enhance the driving experience in your Ford with 2 quality Heating Part components, starting at $76.99.

show more show less

from

$76.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$93.99

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

Most Popular 2018 Ford F-150 Blend Doors

Customize your Ford with 3 Blend Doors products like Air Blend Door Actuators, all priced under $26.99.

show more show less

from

$26.49

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$26.49

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$26.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

Top Picks for 2018 Ford F-150 Engine Cooling Parts

Upgrade Ford F-150s with top-quality Engine Cooling Parts parts, including 49 OEM and aftermarket selections for your 2018 model.

show more show less

from

$131.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$10.99

Each thermostat gasket is built to Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$7.99

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$5.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$10.79

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$22.99

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$25.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$24.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$24.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$26.99

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$30.99

When the seals fail between an upper coolant tee and radiator hose, there typically hasn’t been a fix besides buying a whole new coolant tee. This Dorman OE FIX kit offers a cost effective direct replacement of worn O-rings.

Product Features:

Cost-effective repair – this kit allows you to directly replace coolant tee and radiator hose O-rings
Complete set – includes two large and one small O-ring
Application specific – strictly designed for certain Ford F150 and Mustang model years
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$6.79

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$368.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$183.99

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
Complete package – assembly is designed with the same materials and components as the original part
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$8.99

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$23.99

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
O-rings, seals or thread sealant are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$16.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Manufactured for the sealing repair environment
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$765.99

Ideal replacement – this active grille shutter and motor assembly precisely matches the original equipment assembly on specific makes and models
Plug & play installation – this grille shutter assembly is made with a factory-style electrical connector for a trouble-free installation
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

from

$662.99

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
Complete package – assembly is designed with the same materials and components as the original part
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$615.99

Ideal replacement – this active grille shutter and motor assembly precisely matches the original equipment assembly on specific makes and models
Plug & play installation – this grille shutter assembly is made with a factory-style electrical connector for a trouble-free installation
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

from

$471.99

Ideal replacement – this active grille shutter and motor assembly precisely matches the original equipment assembly on specific makes and models
Plug & play installation – this grille shutter assembly is made with a factory-style electrical connector for a trouble-free installation
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

from

$464.99

Ideal replacement – this active grille shutter and motor assembly precisely matches the original equipment assembly on specific makes and models
Plug & play installation – this grille shutter assembly is made with a factory-style electrical connector for a trouble-free installation
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

from

$366.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$346.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. The construction of this housing is improved over the OE design to fix and update any issues that the OE design may have had.

Product Features:

No special tools required
Easy, one step fit and installation
Meets or exceeds all OEM standards

In-Demand Air Conditioning Parts for 2018 Ford F-150s

Select from 19 premium Air Conditioning Parts parts for your 2018 Ford F-150, with prices ranging from $4.99 to $766.99.

show more show less

from

$73.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$414.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Matched high-quality needle-roller bearing ensures low friction and high load capability.

from

$44.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$45.99

This 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles
Ideal solution – this socket is a reliable replacement for an original socket that is damaged or has failed due to fatigue or electrical malfunction
Durable construction – this socket is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$28.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$749.99

New Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor.

Product Features:

Every unit is 100% function and leak tested
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Very low friction coating used on swash plate to improve durability
PTFE coated pistons improve performance and reduce wear
Rubber dampened clutch plate ensures smooth clutch engagement and reduces wear
Matched high-quality needle-roller bearing ensures low friction and high load capability
Limited Warranty when following warranty requirements: Flush A/C System, replace accumulator/receiver dryer, replace orifice tube/expansion device, and filling with correct oil and refrigerant
New Compressors meet or exceed OE specifications
New Compressors are validated for the equivalent of 100,000 miles
New Compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
New Compressors come with direct fit connectors for ease of installation and to help eliminate splicing
New Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor

from

$96.99

New Platinum Pro A/C Condenser

Product Features:

Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$44.99

Carquest A/C Accessories provide a comprehensive offering of premium quality fittings and tools to service all aspects of an a/c service from the most simple fitting replacement to complex diagnostics required for late model applications.

from

$36.99

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$766.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators are helium leak tested prior to packaging.
Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
The specific PAG oil required by your vehicle application is included.
O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.

from

$653.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators are helium leak tested prior to packaging.
Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
The specific PAG oil required by your vehicle application is included.
O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.

from

$599.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$205.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.

from

$56.99

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$39.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$23.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$20.49

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$9.99

This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.99

Product Features:

Color: Black
Size: M8 x 1mm

Most Sold 2018 Ford F-150 Blower Motor and Related Products

Explore our best-selling Ford parts for the 2018 F-150 among 2 OEM and aftermarket options starting from $203.99.

show more show less

from

$203.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$203.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Functionally Equivalent to OE Design
Magnetic size and properties compare or exceed OEM
Hermetically Sealed & Thermally Protected Electronics

Top-Rated Cooling and Climate Controls Brands For Your 2018 Ford F-150

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2018 Ford F-150s. Below you’ll find some of our best rated Cooling and Climate Controls from FELPRO, Carquest Premium, and Mahle, and more. Cooling and Climate Controls from these brands that fit a 2018 F-150 start at just $5.99 and are rated as high as 4.6 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2018 Ford F-150 Cooling and Climate Controls

When it comes to maintaining or upgrading your 2018 Ford F-150, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Cooling and Climate Controls, specifically designed for the 2018 Ford F-150. With over 2 FELPRO brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.99, with an average price of just $9.49. Plus, with over 15 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $10.99

(4)

Engine Coolant Thermostat Gasket

“What can I say? It’s a rubber gasket and it works fine.”

from $7.99

(11)

Engine Water Pump Gasket

“Perfect fit !”

Popular Carquest Premium 2018 Ford F-150 Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2018 Ford F-150 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2018 F-150, Advance Auto Parts carries a full inventory of 1 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Ford in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range up to $131.99, plus, with more than 3 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from $131.99

(3)

Engine Water Pump: New, Gasket/Seals Included

“Excelente”

FAQs for 2018 Ford F-150 Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2018 Ford F-150s?

Out of 75 Cooling and Climate Controls that fit 2018 Ford F-150s, the following parts are the top sellers:

Coolant Tee and Radiator Hose O-Ring Kit (OE Fix) (11934876) – $30.99
Engine Water Pump: New, Gasket/Seals Included (11883049) – $131.99
Engine Coolant Thermostat Gasket (10901041) – $10.99

What’s the price range for 2018 Ford F-150 Cooling and Climate Controls?

Cooling and Climate Control prices for the 2018 Ford F-150 start at $4.99 and go up to $766.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2018 Ford F-150?

The average price for Cooling and Climate Controls for the 2018 Ford F-150 is $133.93. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Ford F-150 model years?

Yes, we currently carry Cooling and Climate Controls for 31 model years of Ford F-150s between 1977 and 2025. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2017, 2016, 2015, and 2014.

What are the cheapest Cooling and Climate Controls for my 2018 Ford F-150?

The cheapest 2018 Ford F-150 Cooling and Climate Controls we carry in stock are:

A/C Service Valve Cap, Black, M8 x 1mm (50154176) – $4.99
Water Outlet Gasket (10307416) – $5.99
Engine Coolant Thermostat Gasket (12005679) – $6.79
Engine Coolant Outlet Gasket (12161573) – $6.79
Engine Water Pump Gasket (12164164) – $6.99

What are the top-rated Cooling and Climate Controls that fit the 2018 Ford F-150?

Out of 967 reviews by customers, our 2018 Ford F-150 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2018 Ford F-150 and their top-rated products:

Blend Doors
- HVAC Blend Door Actuator: 1 Piece (11776221) – $26.49
Engine Cooling Parts
- HVAC Blend Door Actuator: 1 Piece (11776221) – $26.49

What types of Cooling and Climate Controls do you sell for my 2018 Ford F-150?

As of 11/2/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2018 Ford F-150:

Can I get help with 2018 Ford F-150 Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Cooling and Climate Controls and more.

What is your return policy for Ford F-150 Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Ford F-150 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2018 Ford F-150 Cooling and Climate Controls

Carquest Premium – HVAC Blend Door Actuator (Part No.DLC2736)

Carquest Premium – New Diesel Kiki DKS20 Compressor with Clutch (Part No.T68686)

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.84860)

Carquest Premium – Multi-Use Connector (Part No.PTA1128)

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83387)

Carquest Premium – Coolant Housing/Water Outlet: Includes Seal (Part No.CH4822)

Dorman – Help – Radiator Drain Cocks (Part No.61108)

Carquest Premium – Standard Thermostat: 195 Degrees (Part No.14989)

Dorman – Active Grille Shutter (Part No.601-360)

Dorman – Radiator Fan Assembly (Part No.621-804)

Carquest Premium – AC Pressure Sensor (Part No.ABA1012)

Carquest – Engine Camshaft Position Sensor Connector (Part No.PT5754)

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35993)

Motorad – Thermostat Kit: Includes Housing, Thermostat and Gasket, 195 Degrees (Part No.4886KT)

Carquest Premium – A/C Compressor and Component Kit (Part No.5538K)

Felpro – Engine Water Pump Gasket (Part No.36119)

Felpro – Multi-Purpose O-Ring (Part No.35489)

Felpro – Engine Water Pump Gasket (Part No.36082)

Edelbrock – Engine Water Pump Gasket Set for Ford 289-302 (Part No.7253)

Felpro – Engine Coolant Thermostat Gasket (Part No.36111)

Edelbrock – Waterneck for Small Block Ford (Part No.48143)

Carquest Premium – Blower Motor: without Wheel (Part No.35579)

KAI – A/C Condenser (Part No.CNDDPI3618)

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10262)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.412401)

Felpro – Engine Coolant Thermostat Gasket (Part No.35991)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA1021)

Carquest Premium – A/C Severe Temp Automatic Adjusting Orifice Tube (Part No.T38904)

Carquest Premium – Heater Core (Part No.910568)

Carquest Premium – Heater Core (Part No.910740)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-288)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-290)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-289)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T3170)

Felpro – Engine Coolant Thermostat Gasket (Part No.35991)

Felpro – Engine Water Pump Gasket (Part No.35478)

MAHLE Original – Water Outlet Gasket (Part No.C32197)

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35934)

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10262)

Carquest Premium – Standard Thermostat: 190 Degrees (Part No.49238)

Carquest Premium – Standard Thermostat: 187 Degrees (Part No.49229)

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.49228)

Felpro – Engine Water Pump Gasket (Part No.35990)

Dorman – Coolant Tee and Radiator Hose O-Ring Kit (OE Fix) (Part No.926-168)

Felpro – Engine Coolant Thermostat Gasket (Part No.36111)

Carquest Premium – Radiator (Part No.813718)

Dorman – Radiator Fan Assembly: Dual, Cost Effective and Reliable (Part No.621-542)

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35993)

Carquest Premium – Coolant Temperature Sensor 1TS1171 (Part No.WTC1567)

Felpro – Engine Water Pump Gasket (Part No.36082)

Dorman – Active Grille Shutter (Part No.601-360)

Dorman – Dual Rad Fan Assembly (Part No.620-190)

Dorman – ACTIVE GRILLE (Part No.601-362)

Dorman – Active Grille Shutter (Part No.601-522)

Dorman – Active Grille Shutter (Part No.601-392)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813510)

Carquest Premium – Outlet Flange: With Seals (Part No.CH2118)

Carquest Premium – A/C Block Expansion Valve Kit (Part No.T39517)

Carquest Premium – A/C New, with Clutch, with HCC-RS20 Compressor (Part No.T98324)

Carquest Premium – Multi-Use Connector (Part No.PTA1369)

Dorman – Power Outlet Socket (Part No.926-331)

Carquest Premium – Multi-Use Connector (Part No.PTA1151)

Carquest Premium – New Diesel Kiki DKS20 Compressor with Clutch (Part No.T68686)

KAI – A/C Condenser (Part No.CND4689)

Carquest Premium – A/C System Mounted Pressure Transducer (Part No.T37340)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARE2352)

Carquest Premium – A/C Compressor and Component Kit (Part No.10438K)

Carquest Premium – A/C Compressor and Component Kit (Part No.10589K)

Carquest Premium – A/C New, with Clutch, with DKS20 Compressor (Part No.T168665)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714689)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC4333)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA2003)

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83305)

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83387)

Dorman – Help – Air Conditioning Service Port Caps (Part No.54374)

Motorcraft – A/C Service Valve Cap, Black, M8 x 1mm (Part No.YF-37240)

Carquest Premium – Blower Motor: with Wheel (Part No.75045)

Carquest Premium – Blower Motor: With Wheel (Part No.76508)