Name: Power Steering Fluid: All Vehicles, Anti-Wear Protection, 50k miles, 32 oz.
Brand: Prestone
SKU: AS261Y/1
Price: 9.99 USD
Rating: 5.0 (111 reviews)

from

$9.99

Prestone® Power Steering Fluid (PSF) delivers increased system life. Designed with Anti-wear System Protection, Prestone PSF protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

50,000 Mile Fluid Life
Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
For use in all manufacturers
Conventional Formula – For use in all manufacturers

from

$14.99

Prestone® MAX American Vehicles Power Steering Fluid (PSF) + Stop Leak maximizes and increases system life + the power to stop leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. This formula is also great at preventing leaks by rejuvenating seals before they leak. This synthetic fluid is designed with 2X Anti-wear System Protection, which means more protection against pump failure, squeals and clogs. 100,000 mile fluid life, 2X more than conventional fluid, extends the time between replacement. This fluid is formulated for American vehicle manufacturers: Ford, Lincoln, Mercury, Dodge, Ram, Jeep, Chrysler, GMC, Chevrolet, Buick, Cadillac, Pontiac, Oldsmobile and others. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

100,000 Mile Fluid Life. Synthetic Formula for longer life and more protection
MAX + Stop Leak. Stop Leak Additives to prevent and stop power steering system leaks.
For use in American vehicle manufacturers: Ford, Lincoln, Mercury, Dodge, Ram, Jeep, Chrysler, GMC, Chevrolet, Buick, Cadillac, Pontiac, Oldsmobile and other
2X Anti-Wear Protection for enhanced System Life vs. conventional fluid. More protection against pump failure, squeals and clogs

from

$22.99

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05 antifreeze/coolant uses the highest quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications
Formulated for long life performance
Low-silicate, low-pH and phosphate-free formula
Helps protect all cooling system metals, including aluminum

from

$19.99

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05® antifreeze/coolant uses the highest quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications
Formulated for long life performance
Low-silicate, low-pH and phosphate-free formula
Helps protect all cooling system metals, including aluminum

from

$9.99

FRAM Mercon® V ATF is for use in Ford vehicle transmissions and transaxles. Especially formulated to exhibit better low-temperature flow and better shear-stability, FRAM Mercon® V ATF meets Ford performance requirements of vehicles specifying Mercon® V ATF. FRAM Mercon® V ATF is recommended for use in all transmissions, hydraulic systems, and power steering units manufactured by American, European, Korean, Japanese and other manufactures from around the world specifying Mercon® V type transmission fluids.

Product Features:

Improved foam and corrosion prevention
Improved oxidation stability
Promotes smooth shifting
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR TRANSMISSION
TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

from

$33.99

FRAM DEXRON®-VI FULL SYNTHETIC ATF represents the latest technology in full synthetic automatic transmission fluids. This product is designed for the newest generation of highly efficient transmissions now being installed in most vehicles, and is DEXRON®-VI licensed by GM and meets JASO 1A performance requirements. It is a fuel efficient choice for older models as well, such as those currently using DEXRON®-III. FRAM DEXRON®-VI FULL SYNTHETIC ATF is recommended for use in all GM DEXRON® applications and in transmissions applications calling for Toyota WS, Nissan Matic J and Matic S, Ford part numbers XT-10-QLV and XT-6-QSP, Honda Z-1 and DW 1, and Hyundai SP-VI. Check owner’s manual for specific recommendations.

Product Features:

Outstanding resistance to oxidative and thermal breakdown.
Exceptional low temperature fluidity.
Excellent anti-wear properties.
Excellent gear shift quality throughout service life.
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

from

$11.79

FRAM DEXRON®-VI FULL SYNTHETIC ATF represents the latest technology in full synthetic automatic transmission fluids. This product is designed for the newest generation of highly efficient transmissions now being installed in most vehicles, and is DEXRON®-VI licensed by GM and meets JASO 1A performance requirements. It is a fuel efficient choice for older models as well, such as those currently using DEXRON®-III. FRAM DEXRON®-VI FULL SYNTHETIC ATF is recommended for use in all GM DEXRON® applications and in transmissions applications calling for Toyota WS, Nissan Matic J and Matic S, Ford part numbers XT-10-QLV and XT-6-QSP, Honda Z-1 and DW 1, and Hyundai SP-VI. Check owner’s manual for specific recommendations.

Product Features:

Outstanding resistance to oxidative and thermal breakdown.
Exceptional low temperature fluidity.
Excellent anti-wear properties.
Excellent gear shift quality throughout service life.
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

from

$12.49

Prestone® MAX DOT 3 Motor Vehicle Brake Fluid is our highest grade formula, maximizing performance vs. DOT standard. Prestone MAX is our best brake fluid at protecting against overheating and brake fade. With 100,000 mile fluid life, our longest life fluid has 2X more miles between replacement than regular Prestone DOT 3. Prestone MAX has superior performance in severe braking conditions when compared to regular Prestone DOT 3, which means even more piece of mind about the braking system. This synthetic fluid starts with our highest dry boiling point giving our best protection against performance decline due to water absorption. Prestone MAX DOT 3 is safe to use in all DOT 3 braking systems, ABS, disc or drum, and can mix with any DOT 3 fluid. Mixing Prestone MAX with other fluids will lower the performance rating for miles and boil points, for best results replace completely with Prestone MAX DOT 3. It is recommended to only use the DOT fluid specified for your car. Using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:

100,000 Mile Fluid Life
Prevent Overheating & Brake Fade with Our Highest Grade Formula. Prevents corrosion of all metals within the braking system.
Superior Protection in Extreme Braking Conditions
Synthetic, Long Life Formula – 2X Longer than regular Prestone DOT 3

from

$11.49

Prestone® DOT 3 Motor Vehicle Brake delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 3. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system. This formula is safe to use in all DOT 3 braking systems (ABS, disc or drum) and can mix with any DOT 3 fluid. It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:

50,000 Mile Fluid Life
Prevent Overheating & Brake Fade with High Grade Formula*
Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
Synthetic, Extended Fluid Life Formula

from

$5.29

Prestone® DOT 3 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 3. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system. This formula is safe to use in all DOT 3 braking systems (ABS, disc or drum) and can mix with any DOT 3 fluid. It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:

50,000 Mile Fluid Life
Prevent Overheating & Brake Fade with High Grade Formula*
Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
Synthetic, Extended Fluid Life Formula

from

$29.99

Valvoline Daily Protection Motor Oil is specially formulated to exceed industry standards for wear, deposit and sludge protection to help keep engines running like new. Developed with high quality additives and premium base oils, it’s designed to flow easily at cold temperatures, reducing wear at startup and providing added protection against motor oil breakdown in tough conditions. For enhanced fuel efficiency, choose Daily Protection Synthetic Blend 5W-20 or 5W-30. Developed with low-friction technology to support strong fuel economy.

Product Features:

Extra wear protection designed to help keep automotive engine parts like new
Added detergents help protect against sludge and deposits
High quality additives resist motor oil breakdown in tough conditions
Low-friction formula supports strong fuel efficiency
Premium formulation flows easily at low temperatures reducing wear at start-up

from

$45.99

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

Better wear protection
Increased fuel efficiency
Better protection of the expensive catalytic emission system
Improved compatibility with fuels containing ethanol
Superior corrosion protection
Meets ILSAC GF-5 and Dexos1 performance requirements

from

$12.99

High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.

Product Features:

Better Wear Protection
Increased Protection against Low Speed Pre-Ignition
Increased Fuel Efficiency
Better Protection for Vehicle Exhaust Emissions Equipment
Improved Compatibility with Fuels Containing Ethanol
Superior Corrosion Protection
Made in USA

from

$29.99

Even if you dont notice, after 75,000 miles, friction and high temperatures cause leaks, deposits and sludge that shorten the life of your motor. Thats why you need the superior protection of MaxLife, the world’s first high mileage oil, specially formulated to extend the life of your engine. Through its advanced synthetic blend formulation, it supplies boosted wear protection, special seal conditioners, added detergents and anti-oxidant additives that help to maximize the life of an engine. Its advanced formula can also be utilized in newer cars to help prevent the causes of engine breakdown before they ever begin. Valvoline High Mileage with Maxlife Technology meets the API SN with SN PLUS specification, protecting gasoline direct injected engines from low-speed pre-ignition.

Product Features:

Seal conditioners rejuvenate aging engine seals to help stop and prevent oil leaks
Extra wear protection helps prevent future engine wear
Extra detergents help keep older engines cleaner by bonding with and removing sludge and deposits
Anti-oxidants help prevent oil breakdown preventing engine-clogging sludge and deposit formation

from

$45.99

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

Better wear protection
Increased fuel efficiency
Better protection of the expensive catalytic emission system
Improved compatibility with fuels containing ethanol

from

$36.99

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
40% better wear protection vs. industry standard as tested in the sequence ivb engine test
25% better deposit protection with superior engine cleaning detergents as tested in the gmod engine test
Exceptional high/low temperature protection defends your motor no matter the weather conditions
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
Advanced engine protection: Valvoline Advanced Full Synthetic Engine Oil is designed to provide advanced protection to today’s sophisticated engines, ensuring maximum performance and engine longevity.

from

$13.99

Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$13.49

Only compatible with R134a refrigerant; Tools required for installation; Plastic bottle; Universal applications

from

$13.29

Certified A/C Pro R-134a PAG 46 Refrigerant Oil with ICE 32. This product contains approximately 8 fluid ounces of PAG refrigerant oil with ICE32. Low viscosity PAG oil for R-134a auto A/C systems; ISO 46 viscosity. R-134a PAG 46 AC Oil Lubricant: with ICE 32 Lubricant Enhancer features advanced chemistry to help extend compressor life and improve cooling capacity. The PAG oil helps quiet noisy compressors. Meets OEM specifications.

Product Features:

Low viscosity PAG oil for R-134a auto A/C systems; ISO 46 viscosity
ICE32 Lubricant Enhancer: advanced chemistry to help extend compressor life and improve cooling capacity
Meets OEM specifications

from

$12.79

Product Features:

High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$11.81

3.5 oz. tube, carded – OEM specified. Permatex® Ultra silicones were developed to meet today’s technology changes. Sensor-safe, low odor, noncorrosive.

Product Features:

Outstanding oil resistance and joint movement tolerance
Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones.
Temperature range -65F to 500F (-54°C to 260°C) intermittent
Resists auto and shop fluids and vibration Suggested Applications: Valve covers, oil pans, transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings. DIRECTIONS :
For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake and Parts Cleaner.
Cut nozzle to desired bead size. Gaskets are best formed using a 1/16 to 1/4 (2 to 6 mm) bead.
Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes.
Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
Allow to dry for one hour then re-tighten 1/4 to 1/2 turn.
Silicone will skin over in one hour and fully cure in 24 hours under normal conditions.
Allow more time for cold or very dry conditions.
Clean uncured silicone from hands, tools and clothing with Permatex® Fast Orange® Wipes or Fast Orange® Hand Cleaner. NOTE: Not recommended for use on head gaskets or on parts in contact with gasoline. TECHNICAL DATA SHEET

2010 Mazda 6 Fluids and Chemicals

More 2010 Mazda 6 Fluids and Chemicals Categories

Essential 2010 Mazda 6 Fluids and Chemicals

Prestone – Power Steering Fluid: All Vehicles, Anti-Wear Protection, 50k miles, 32 oz. (Part No.AS261Y/1)

Prestone – MAX Power Steering Fluid: American Vehicles, With Stop Leak, Enhances System Life, 100k miles, 12 oz (Part No.AS277)

ZEREX – G05® Full Strength Concentrate Antifreeze / Coolant, 1 Gallon (Part No.ZXG051)

ZEREX – G05 50/50 Ready-to-Use Antifreeze / Coolant, 1 Gallon (Part No.ZXG05RU1)

FRAM – Mercon V Automatic Transmission Fluid: 1 Quart (Part No.F450)

FRAM – Full Synthetic Dexron VI Automatic Transmission Fluid: 1 Gallon (Part No.F426-1G)

FRAM – Full Synthetic Dexron VI Automatic Transmission Fluid: 1 Quart (Part No.F426)

Prestone – DOT 3 Brake Fluid: MAX Synthetic, Highest Grade, Superior Protection, 100k miles, 32 oz (Part No.AS410)

Prestone – DOT 3 Brake Fluid: Synthetic, Prevents Corrosion, Safe For ABS, Disc, Drum Brakes, 50k miles, 32 oz (Part No.AS401)

Prestone – DOT 3 Brake Fluid: Synthetic, Prevents Corrosion, Safe For ABS, Disc, Drum Brakes, 50k miles, 12 oz (Part No.AS400)

Valvoline – Daily Protection 5W-30 Synthetic Blend Motor Oil, Easy Pour 5 Quart (Part No.881159)

Royal Purple – 5W30 High Performance Synthetic Oil (5 Quart) (Part No.51530)

Royal Purple – High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT (Part No.01530)

Valvoline – High Mileage 5W-20 Synthetic Blend Motor Oil, 5 Quart (Part No.881162)

Royal Purple – SAE Multi-Grade Synthetic Motor Oil 5W20 (5 Quart) (Part No.51520)

Valvoline – Advanced Full Synthetic 5W-20 Engine Oil: Maximizes Engine Life, 5 Quart (Part No.881147)

Valvoline – Import Multi-Vehicle Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822389)

Factory Air – 8 oz. Bottle Premium PAG 46 Oil w/o Dye (Part No.59007)

Certified A/C Pro – R-134a PAG 46 AC Oil Lubricant: With ICE 32 For Improved Cooling, 8 oz (Part No.GPL-5)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)

Permatex – Ultra Grey® Rigid High-Torque RTV Silicone Gasket Maker (Part No.3K200329086PMX)

Popular 2010 Mazda 6 Fluids and Chemicals Categories

2010 Mazda 6 Fluids and Chemicals

Top-Rated Fluids and Chemicals Brands For Your 2010 Mazda 6

Popular Castrol Fluids and Chemicals

Top-Rated Valvoline Fluids and Chemicals

FAQs for 2010 Mazda 6 Fluids and Chemicals

What are the most purchased Fluids and Chemicals for the 2010 Mazda 6?

What are the top-rated 2010 Mazda 6 Fluids and Chemicals?

More Popular Parts for All Makes