2010 Jeep Wrangler Bumpers
More 2010 Jeep Wrangler Bumpers
Find your specific 2010 Jeep Wrangler original or aftermarket Bumpers below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2010 Jeep Wrangler Bumpers
KAI – Front Bumper To Body Filler Panel, Plastic Upper Cover (Part No.CH1087124)
from
$79.99
New Standard Replacement Front Bumper To Body Filler Panel, Plastic [Upper Cover]
Product Features:
See More
Product Features:
- Plastic [Upper Cover], Made Of Polypropylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Rugged Ridge – Front Bumper (Part No.11561.03)
from
$561.99
Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Need to mount a winch on your Jeep? This front tube bumper features a special cut-out for winch mounting (winch mounting plate not included). For winch mounting plate
Product Features:
See More
Product Features:
- Textured Black
- With Raiser and Winch Cut Out
- Welded End Caps
- Limited 5 Year Warranty
Rugged Ridge – Front Bumper (Part No.11560.03)
from
$586.99
Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Need to mount a winch on your Jeep? This front tube bumper features a special cut-out for winch mounting (winch mounting plate not included). For winch mounting plate
Product Features:
See More
Product Features:
- Gloss Black
- With Raiser and Winch Cut Out
- Welded End Caps
- Limited 5 Year Warranty
Westin – WJ2 Rear Bumper (Part No.59-82035)
from
$1568.99
Westins WJ2 Rear Bumper with Tire Carrier is constructed with 3/16-inch plate steel with an 8 gauge tire carrier. The tire carrier is designed to work with or without factory or Westin hitches, and opens and closes with the tailgate. Tapered roller bearings and 2 turnbuckle heim links improve carrier rigidity while its bolt-on spindle allows adjustment of the carrier separate from the bumper. Features integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Includes 2 off-road jack points, license plate locator, trailer plug, fender gap transition plates, camera back-up relocator and more. Offers a bottom frame mount that helps prevents the bumper from rotating. Product includes bumper, mounting hardware and install instructions.
Product Features:
See More
Product Features:
- Bumper Made Of 0.1875 in. Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points For Post Mount Square Lights
- Rock Light Mount Points On Lower Bumper Corners
- Bottom Frame Mount Prevents Bumper From Rotating
- 2 Off-Road Jack Points
- Bolt On Installation; No Drill Required
- Includes Bumper; Mounting Hardware And Install Instructions
TrailFX – One Piece Design, Direct-Fit, Mounting Hardware Included, Textured Black, Steel (Part No.JL03T)
from
$1169.99
When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.
Product Features:
See More
Product Features:
- Textured Black Powder Coat
- Wrap Around Corners To Protect The Jeep Body
- 3 Inch Cube Flush Mount Light Opening For Reverse Lighting (Lights Not Included)
- D-Ring Mounts And 2-3/4 Ton D-Rings Included
- 2 Inch Receiver Welded In Place To Vehicle Towing
- Spare Tire Carrier Mounts To Bumper And Tailgate For Support Up To 125 Pounds STC Moves Freely With Opening Of Rear Tailgate Door
Rugged Ridge – Front Bumper Cover (Part No.11540.26)
from
$68.99
Are you looking for protection or Rugged Ridge D rings? This pair of European styled XHD bumper tow point covers feature a hard-wearing injection molded plastic design that matches the factory one for an overall integrated look. For use with 11540.10 and
Product Features:
See More
Product Features:
- Textured Black
- European Style
- Easily Removable
- Limited 5 Year Warranty
Crown Auto Jeep Replacmnt – Black, Plastic, Front Right (Part No.55155756AB)
from
$17.49
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Crown Auto Jeep Replacmnt – 1-Piece, Direct-Fit, Painted Black Steel, Without Tow Hook Mounts/D-Ring Mounts (Part No.55234777)
from
$132.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Rugged Ridge – Spartan Front Bumper (Part No.11548.01)
from
$648.99
Spartan Front Bumper
Rugged Ridge – Spartan Front Bumper (Part No.11548.71)
from
$711.99
Spartan Front Bumper
Rugged Ridge – 3.5-Inch Bull Bar; B (Part No.11564.03)
from
$517.99
3.5-Inch Bull Bar; B
Rugged Ridge – Bull Bar (Part No.82001.27)
from
$489.99
Get that heavy-duty look with a Bull Bar from Rugged Ridge Each design has been custom designed for your JK Wrangler utilizing tough 3/8-1/4 inch thick heavy-duty mounting brackets. Each Bull Bar offers smooth ground welds and laser cut skid plates. The b
Product Features:
See More
Product Features:
- Black and Stainless Steel
- 3 in. Tubes
- Skid Plate
- Limited 5 Year Warranty
Rugged Ridge – Bull Bar (Part No.11564.02)
from
$538.99
Get that heavy-duty look with a Bull Bar from Rugged Ridge! Each design has been custom designed for your JK Wrangler utilizing tough 3/8-1/4 inch thick heavy-duty mounting brackets. Each Bull Bar offers smooth ground welds and laser cut skid plates. The
Product Features:
See More
Product Features:
- Black
- 3 in. Tubes
- Skid Plate
- Limited 5 Year Warranty
Crown Auto Jeep Replacmnt – Black, Plastic (Part No.55155760AB)
from
$27.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Omix – Bumper Extension (Part No.12031.08)
from
$28.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Plastic
- OE Style
- Direct Fit
- Right Side
- Limited 5 Year Warranty
Omix – Bumper Extension (Part No.12031.10)
from
$34.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Plastic
- OE Style
- Direct Fit
- Right Side
- Limited 5 Year Warranty
KAI – Passenger Side Front Bumper End (Part No.CH1005128)
from
$25.99
New Standard Replacement Passenger Side Front Bumper End
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Passenger Side Rear Bumper End (Part No.CH1105140)
from
$29.99
New Standard Replacement Passenger Side Rear Bumper End
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Rugged Ridge – Xtreme Heavy Duty; Bumper End Caps (Part No.11540.43)
from
$394.99
Looking to add some versatility and style to your Wrangler? No other bumper can give your Jeep this many looks. Featuring a modular design, these bumpers provide dozens of different appearances and styles so you can build the exact bumper of your choice!
Product Features:
See More
Product Features:
- Textured Black
- Additional Storage
- Modular Design
- Bolt-on
- Limited 5 Year Warranty
Rugged Ridge – Xtreme Heavy Duty; Bumper Over Rider (Part No.11541.14)
from
$273.99
This textured black over-rider hoop from Rugged Ridge features 2.3 inch tubing and simply bolts to the XHD aluminum front bumpers. Its modular design will give your JK a whole new look to make your bumper stand out. Designed to be a whole new look while b
Product Features:
See More
Product Features:
- Textured Black
- 2.3 in. Tube
- Modular Design
- Bolt-on
- Limited 5 Year Warranty
Rugged Ridge – D-Ring (Part No.11235.01)
from
$53.99
This pair of galvanized 3/4-inch D-shackles from Rugged Ridge is rated to 9,500 lbs. and provides everything you’ll need for recovering stuck Jeeps. Featuring a strong and sturdy construction, their natural high quality stainless steel finish gives them a
Product Features:
See More
Product Features:
- Silver with Red Pin
- 9500Lb Pull Capacity
- Galvanized Steel
- Pair
- 3/4 in.
KAI – Bumper Cover Reinforcement (Part No.CH1006212DSC)
from
$404.99
New CAPA Certified Premium Replacement Front Bumper Cover Reinforcement Bar
Product Features:
See More
Product Features:
- Made Of High Strength Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Popular 2010 Jeep Wrangler Bumpers Categories
2010 Jeep Wrangler Bumpers
Maybe you’re in the middle of a full rebuild of that 2010 Jeep Wrangler. Maybe you just need a couple of Bumpers. Either way, Advance Auto Parts has 32 different Bumpers in our inventory ranging from $10.49 to $996.99. That means you can find the exact parts or products you need to keep that 2010 Jeep Wrangler running smoothly.
Bumpers are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 2010 Jeep Wrangler. Rugged Ridge, KAI, and TrailFX are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Bumpers for your 2010 Jeep Wrangler, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Bumpers to keep your 2010 Jeep Wrangler rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Bumpers Brands To Make Your 2010 Jeep Wrangler Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 Jeep Wrangler demands trusted brand parts and products to keep it running. Many trusted brands of Bumpers make up Advance Auto Parts’ inventory, and all are ready to help make your Wrangler the best it can be. Be sure to browse some of our top Bumpers brands and parts.
Popular Rugged Ridge Bumpers
We carry Rugged Ridge parts in our stock across Bumper Corners and Bumper D-Rings categories, plus more. For a 2010 Jeep Wrangler, our most popular Rugged Ridge Bumpers include:
FAQs for 2010 Jeep Wrangler Bumpers
What are the most purchased Bumpers for the 2010 Jeep Wrangler?
Out of 32 Bumpers for the 2010 Jeep Wrangler, the most popular in our inventory are:
from
$79.99
This product is not rated
Front Bumper To Body Filler Panel, Plastic Upper Cover
Bumper to Body Filler Panels
from
$633.99
This product is not rated
One Piece Design, Direct-Fit, Mounting Hardware Included, Textured Black Steel
Front Bumpers
