2010 Ford F-250 Super Duty Performance and Racing Products

Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 2010 F-250 Super Duty. Advance Auto Parts has popular F-250 Super Duty parts like Performance Air Filters, Performance Exhaust Products, Performance Air Intake Kits and more. You’ll also find aftermarket and OEM Performance and Racing Products for other F-250 Super Duty model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2010 Ford F-250 Super Duty Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2010 Ford F-250 Super Duty Performance and Racing Products Categories

Computer Chip Programmers

Performance Air Filters

Performance Air Intake Kits

Performance Exhaust Mufflers

Performance Computer Prom and Chips

Engine Cold Air Intakes

Performance Ignition Modules

Performance Engine Camshafts

Performance Nitrous Systems

Essential Performance and Racing Products for 2010 Ford F-250 Super Duties

from

$469.99

The GT Gas and Diesel tuners unlock more horsepower and torque to meet the unique demands you put on your vehicle. With preloaded tuning, customizable gauges to track performance, and a wide variety of hauling and off-roading features, you’ll have plenty of power to take on tough jobs or improved fuel economy for long highway hauls.

Product Features:

Track critical performance data in real-time on easy to navigate virtual gauges
Select between multiple street-tested, dyno-proven tunes for economy, towing or performance.
Reads and clears DTC (Diagnostic Trouble Codes) with ease
Manage tire size, gear ratio, speed limiter, speedometer calibrations, shift points, and more. Offering shift-on-the-fly tuning and better control of defueling and regeneration.
Product might not be available in all states due to local laws.

from

$462.99

Put up to 40hp and 51lbs. x ft. torque to your N54 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module.

Product Features:

Direct Plug And Play Power
Increased Turbo Boost And Fuel Pressure
In Cabin On The Fly Power Adjustment
4-Power Position Settings: Stock; Sport; Sport+; And Race

from

$285.99

Increased Power and Performance:SCORCHER HD performance chips deliver significant power gains by increasing turbo boost as well as optimizing fuel injection timing and pulse width. Unlike many other chips on the market that “flash” the ECM, our performanc

Product Features:

+224 lbs. x ft. TQ & +133 HP
Increases Boost Pressure and Optimizes Fuel Injection Timing
Enhances Shift Points and Firmness
On-the-Fly Adjustability via a 4-Position Knob

from

$451.99

Direct Plug And Play Power
Increased Turbo Boost And Fuel Pressure
In Cabin On The Fly Power Adjustment
4 Position Switch

from

$49.99

This Spectre OEM replacement air filter is an easy to install performance option for the stock cone shaped air filter in multiple Ford applications. With its HPR (High Performance Replacement) synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock oval and egg shaped Ford air filter housings, this air filter includes sealing gaskets at the base of the air filter to insure a proper seal for great engine protection.

Product Features:

HPR OE Replacement Air Filter
High flow replacement filter designed to fit perfectly in your stock air box
Engineered for increased flow and greater performance
Fits multiple Ford applications
Factory pre-oiled and ready to use
Easy to install with no special tools or skills required

from

$68.99

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills

from

$68.99

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills

from

$1076.99

If you think the torque of that monster diesel is something to brag about then you should feel it with the extra power of NOS. This kit works with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with 10 pound bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring and complete instructions.

Product Features:

Provides Additional Air Your Diesel Wants
Additional 50 HP
w/No Fuel System Or Electronic Upgrades
Complete Kit For Easy Installation

from

$195.99

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Warranty and limited Performance & Sound Guarantee.

Product Features:

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$152.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$152.99

from

$169.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:

Durable fully welded 409 stainless steel
Deep aggressive exhaust note
Noticeable interior resonance
Excellent performance on high horsepower vehicles
No internal packing to blowout

from

$79.99

from

$456.99

The BDX hand-held performance tuner gives drivers the edgepower they need, whether tackling tough terrain, pulling a heavy payload, or maximizing fuel economy on the highway. Its sleek design, full-color display, and customizable gauges help track and adjust powertrain performance to deliver more horsepower and torque when it’s needed most. Cloud-based tune delivery over built-in WiFi means that the BDX will always be running the latest tuning – enabling drivers to stay one step ahead of the packÿ.

Product Features:

Monitor and display vehicle data using the on-screen virtual gauges.
Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
Reads and clears DTC (Diagnostic Trouble Codes) with ease
Product might not be available in all states due to local laws.

from

$469.99

The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.

Product Features:

HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
Reads and Erases Diagnostic Trouble Codes
Display Over 15 Vehicle Parameters
Installation Is Easy-10-20 Minutes
Free Internet Updates And Upgrades
30 Day Money Back Guarantee

from

$399.99

The Max Energy Spectrum Power Programmer delivers more power-per-dollar than any other bolt-on on the market today. Plus, it installs in less than 15 minutes without using tools or getting your hands dirty. Our award-winning Power Tuning adds maximum horsepower, torque, and performance for any kind of driving for vehicles using regular, premium, E85, as well as diesel fuel. The Max Energy Spectrum also has a larger backlit LCD screen for quick and easy setup and user-friendly navigation for simple installation, tuning, and feature options.

Product Features:

Optimized engine tuning
Adjustable rev limiter/speed limiter
Speedometer correction for multiple tire sizes and gear ration changes
Adjustable shift firmness and shift points
Throttle adjustments
Cooling fan on/off temperatures
Return back to factory settings
Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
Internet updateable

from

$419.99

Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.Unique One-Piece Housing: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold weather applications where you want to block the auxiliary air scoop. A large, clear sight window is used for a hassle-free filter inspection.Huge 10-Layer Performance Air Filter: The Momentum HD is designed around a massive 1,000cfm performance 360 degree radial flow air filter with 10-layers of progressive cotton media providing 99.59% cumulative efficiency (independently tested). The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. The air filter is wrapped in reinforced metal providing maximum strength to prevent filter collapse. Filter Dimensions: Flange – 7″x4-3/4″, Base/Top – 9″x7″ with inverted top, Height – 9″, Pleat depth – 20mm, Number of Pleats – 70.Premium Hardware: Premium stainless steel T-bolt clamps and a 2-ply reinforced silicone hump coupling at the turbo is used for strength and durability while also providing the most secure installation available. Momentum HD intakes are designed with fewer parts for a quick and simple installation.Proven Results: After a rigorous design and testing phase, the results are in. The Momentum HD intake system outflowed the factory intake by 24% and produces 20 additional horsepower and 35lbs. x ft. torque.

Product Features:

1000 cfm Performance 360 deg. Radial Flow Air Filter
10 Layer Progressive Cotton Gauze Oiled Media
Unique Air Filter To Housing Interface
Allows For Maximum Filter Size

from

$472.99

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

Guaranteed to increase horsepower and torque.
Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
Engineered to provide high airflow and exceptional filtration.
Replaces factory air filter and intake tube.
Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
Typical installation can be completed in 60 minutes or less with simple hand tools.
No-Hassle Lifetime Limited Warranty.
Will not void vehicle warranty(limited)

from

$207.99

This Spectre air intake system for the Ford Super Duty 7.3L diesel trucks is designed to get large horsepower and torque gains from select F250, F350, F450 and F550 models while working to protect your diesel engine from harmful dirt and debris. This air intake comes with a red Spectre reusable low air filter, high quality polished aluminum tubing and a black powder coated heat shield. The heat shield has been designed specific to your Ford Super Duty’s engine bay to help prevent hot engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish. This intake will not fit trucks with build dates before Dec 7, 1998.

Product Features:

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
Will not void vehicle warranty(limited)

from

$435.99

Unique One-Piece High Quality Housing w/ Auxiliary Scoop: The smooth one-piece high quality sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. A urethane plug is also included if you wish to block off the auxiliary air inlet. (US PAT 9440175) For Filter-to-Housing Interface. High Quality Tube: This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Huge 3-Layer Performance Air Filter: This Momentum HD is designed around a massive Pro DRY S performance 360 degree radial flow air filter with 3-layers of progressive synthetic media providing 99.2% cumulative efficiency. The unique air filter to housing interface (PATENT PENDING) allows for maximum filter size which increases the available air volume while simplifying the installation process. The air filter is wrapped in reinforced metal providing maximum strength to prevent filter collapse. Premium Hardware: Premium clamps and a silicone elbow coupling are used for strength and flexibility while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Product Features:

High Quality 1-Piece Sealed Housing w/Auxiliary Air Inlet
CAD-Designed Roto-Molded Intake Tube
Unique Air Filter To Housing Interface
No Cutting Or Drilling On Factory Parts For Easy Installation

from

$472.99

Guaranteed to increase horsepower and torque.
Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
Engineered to provide high airflow and exceptional filtration.
Replaces factory air filter and intake tube.
Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
Typical installation can be completed in 60 minutes or less with simple hand tools.
No-Hassle Lifetime Limited Warranty.
Will not void vehicle warranty(limited)

from

$399.99

aFe Power now offers an intake cover to help reduce air intake noise. This cover is constructed of vacuum formed ABS plastic material that bolts right up to the intake housing. The aFe logo is front and center letting everyone know what brand of intake you have. This cover provides a stealthy yet aggressive style without hurting the performance of the intake.

Product Features:

4 in. Mandrel Bent 409 Stainless Steel Tubing
Maximum Flow
High Flow Muffler
Bayonet Style Hangers For Easy Installation

from

$367.99

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 60 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
Will not void vehicle warranty(limited)

from

$367.99

Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 60 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
Will not void vehicle warranty(limited)

from

$314.99

The AIRAID Air Box System is engineered to give your engine larger amounts of cooler air to produce more horsepower And torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location And utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This air box system connects to the factory air intake tube. The AIRAID premium air filter is washable And reusable, less restrictive than traditional paper, And assures superior filtration. The AIRAID Air Box System is easy to install with common hand tools. Some AIRAID air box systems are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the product’s vehicle applications to determine the legal status for each vehicle.

Product Features:

Bolt-On Horsepower
Increased Fuel Efficiency
Installs In Minutes
Uses The Latest Dyno-Proven Techniques
Dramatically Improves Air Flow By About 20 Percent
Utilizes OE Mounting Clips
Lifetime No Hassle Warranty(limited)

from

$472.99

Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes.

Product Features:

Guaranteed to increase horsepower and torque
Powder-coated aluminum intake tube paired with dry synthetic air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 50,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
HIGH QUALITY: Made in America.

from

$367.99

Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 60 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
Will not void vehicle warranty(limited)

from

$419.99

Guaranteed to increase horsepower and torque.
Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
Engineered to provide high airflow and exceptional filtration.
Replaces factory air filter and intake tube.
Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
Typical installation can be completed in 60 minutes or less with simple hand tools.
No-Hassle Lifetime Limited Warranty.
Will not void vehicle warranty(limited)

Upgrade your 2010 Ford F-250 Super Duty with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 2010 Ford F-250 Super Duty, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your F-250 Super Duty functioning at its best. At Advance Auto Parts, we offer a wide selection of 26 Performance and Racing Products for the 2010 Ford F-250 Super Duty, designed to meet your needs without breaking the bank. From Performance Air Filter replacements to Performance Exhaust Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2010 Ford F-250 Super Duty at great prices. Our Performance and Racing Products inventory for this model ranges from just $68.99 to $1,277.00, with an average price of $528.61. Our 26 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 2010 Ford F-250 Super Duty without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Ford F-250 Super Duty, we stock popular OEM and aftermarket Performance and Racing Products from top names like SCT Performance, K&N, Flowmaster Inc., and more. SCT Performance Performance and Racing Products start at just $399.99 and boast an impressive 5.0 stars average rating from customers. K&N and Flowmaster Inc. also bring quality to the table, with Performance and Racing Products available starting at $68.99, and at an average 4.8 stars rating. With 2,150 customer reviews and counting, our 2010 Ford F-250 Super Duty Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 Ford F-250 Super Duty is always ready to roll. We’re committed to providing you with everything you need to keep your F-250 Super Duty in top shape, all in one place. Start shopping confidently below for your 2010 Ford F-250 Super Duty!

Best-Selling Performance Air Filters for 2010 Ford F-250 Super Duties

Enhance the driving experience in your Ford with 1 quality Performance Air Filter components, starting at $68.99.

show more show less

from

$68.99

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills

Most Popular 2010 Ford F-250 Super Duty Performance Exhaust Products

Customize your Ford with 1 Performance Exhaust Products products like Performance Exhaust Mufflers, all priced under $152.99.

show more show less

from

$152.99

Top Picks for 2010 Ford F-250 Super Duty Performance Air Intake Kits

Upgrade Ford F-250 Super Duties with top-quality Performance Air Intake Kits parts, including 7 OEM and aftermarket selections for your 2010 model.

show more show less

from

$419.99

Guaranteed to increase horsepower and torque.
Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
Engineered to provide high airflow and exceptional filtration.
Replaces factory air filter and intake tube.
Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
Typical installation can be completed in 60 minutes or less with simple hand tools.
No-Hassle Lifetime Limited Warranty.
Will not void vehicle warranty(limited)

from

$367.99

Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 60 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
Will not void vehicle warranty(limited)

from

$472.99

Guaranteed to increase horsepower and torque
Powder-coated aluminum intake tube paired with dry synthetic air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 50,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
HIGH QUALITY: Made in America.

from

$435.99

Pro DRY S Filter Media
360 deg. Radial Flow Air Filter
3 Layer Progressive Synthetic Media
Washable And Reusable

from

$419.99

1000 cfm Performance 360 deg. Radial Flow Air Filter
10 Layer Progressive Cotton Gauze Oiled Media
Unique Air Filter To Housing Interface
Allows For Maximum Filter Size

from

$376.99

Quantum Cold Air Intake Systems (Patent Pending) by aFe POWER are the latest in airflow technology for your Ford Power Stroke 6.7L (td) truck. From the uniquely integrated Filter-to-Housing design to the state of the art, lightweight injection molded base and top Pro 5R filter, Quantum delivers dyno-proven performance gains, convenience, value and installs in minutes.

Product Features:

Outflows Factory Intake
Unique Filter To Housing Interface For Easy Installation
CAD Designed XLPE Roto-Molded Intake Tube For Optimum Airflow
Intake Tube Heat Soak Resistant and Durable

from

$314.99

Bolt-On Horsepower
Increased Fuel Efficiency
Installs In Minutes
Uses The Latest Dyno-Proven Techniques
Dramatically Improves Air Flow By About 20 Percent
Utilizes OE Mounting Clips
Lifetime No Hassle Warranty(limited)

In-Demand Performance Engines for 2010 Ford F-250 Super Duties

Select from 7 premium Performance Engines parts for your 2010 Ford F-250 Super Duty, with prices ranging from $1,152.00 to $1,277.00.

show more show less

from

$1277.00

XFI 214/231FORDMOD3V

from

$1277.00

XFI 245/256FORDMOD3V

from

$1230.00

XE256PH-12

from

$1230.00

XFI 222/239FORDMOD3V

from

$1205.00

MT234/254FORDMOD 3-V

from

$1161.00

XFI 222/235FORDMOD3V

from

$1152.00

XFI 214/227FORDMOD3V

Most Sold 2010 Ford F-250 Super Duty Performance Ignition Products

Explore our best-selling Ford parts for the 2010 F-250 Super Duty among 1 OEM and aftermarket options starting from $451.99.

show more show less

from

$451.99

Direct Plug And Play Power
Increased Turbo Boost And Fuel Pressure
In Cabin On The Fly Power Adjustment
CAD-Designed Roto-Molded Intake Tube

Top-Rated Performance and Racing Products Brands For Your 2010 Ford F-250 Super Duty

Shop for the best-rated brands offering Performance and Racing Products and other products for your 2010 Ford F-250 Super Duties. Below you’ll find some of our best rated Performance and Racing Products from SCT Performance, K&N, and Flowmaster Inc., and more. Performance and Racing Products from these brands that fit a 2010 F-250 Super Duty start at just $68.99 and are rated as high as 5.0 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular SCT Performance 2010 Ford F-250 Super Duty Performance and Racing Products

When it comes to maintaining or upgrading your 2010 Ford F-250 Super Duty, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. SCT Performance ticks all of those boxes. We offer a wide selection of SCT Performance Performance and Racing Products, specifically designed for the 2010 Ford F-250 Super Duty. With over 1 SCT Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $399.99. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our SCT Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $399.99

(1)

Preloaded Performance Programmer for Increased Horsepower & Torque

“I love this tuner. My car has felt like it really woke up when I installed some of the preset tunes in it. It amazes me that they have preset tunes fo”

Popular K&N 2010 Ford F-250 Super Duty Performance and Racing Products

K&N auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2010 Ford F-250 Super Duty owner should feel confident when installing genuine K&N parts in their vehicle. To ensure the best fit and performance for your 2010 F-250 Super Duty, Advance Auto Parts carries a full inventory of 3 K&N Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these K&N Performance and Racing Products range from $68.99 to $419.99, plus, with more than 209 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $367.99

(4)

Cold Air Intake: Adds Up To 16 Horsepower, With Washable Air Filter

“This air filtration system is a purchase I am very glad I made. The throttle response is wonderful and my baby is purring like a tiger. The F-350 dies”

from $419.99

(4)

Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter

“Easy to install Improved MPG!”

from $68.99

(201)

Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance

“Great Product”

FAQs for 2010 Ford F-250 Super Duty Performance and Racing Products

Which Performance and Racing Products are best-sellers for 2010 Ford F-250 Super Duties?

Out of 26 Performance and Racing Products that fit 2010 Ford F-250 Super Duties, the following parts are the top sellers:

Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device (11051146) – $469.99
Preloaded Performance Programmer for Increased Horsepower & Torque (11844157) – $399.99
Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size (12452493) – $239.99

What’s the price range for 2010 Ford F-250 Super Duty Performance and Racing Products?

Performance and Racing Product prices for the 2010 Ford F-250 Super Duty start at $68.99 and go up to $1,277.00 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 2010 Ford F-250 Super Duty?

The average price for Performance and Racing Products for the 2010 Ford F-250 Super Duty is $528.61. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Ford F-250 Super Duty model years?

Yes, we currently carry Performance and Racing Products for 26 model years of Ford F-250 Super Duties between 1999 and 2026. Performance and Racing Products are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Performance and Racing Products for my 2010 Ford F-250 Super Duty?

The cheapest 2010 Ford F-250 Super Duty Performance and Racing Products we carry in stock are:

Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (22401041) – $68.99
i3 (50008574) – $79.99
Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (20290684) – $152.99
Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size (12452493) – $239.99
Performance Air Intake System (22121598) – $314.99

What are the top-rated Performance and Racing Products that fit the 2010 Ford F-250 Super Duty?

Out of 2,150 reviews by customers, our 2010 Ford F-250 Super Duty Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2010 Ford F-250 Super Duty and their top-rated products:

Performance Air Filters
- Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (22401041) – $68.99
Performance Air Intake Kits
- Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (22401041) – $68.99
Programmers
- Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (22401041) – $68.99

What types of Performance and Racing Products do you sell for my 2010 Ford F-250 Super Duty?

As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 2010 Ford F-250 Super Duty:

Can I get help with 2010 Ford F-250 Super Duty Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.

What is your return policy for Ford F-250 Super Duty Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Ford F-250 Super Duty Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2010 Ford F-250 Super Duty Performance and Racing Products

Bully Dog – Diesel Performance Tuner with Gauges & Customizable Tuning (Part No.40420)

aFe POWER – Power Module (Part No.77-43014)

aFe POWER – Power Module (Part No.77-43033)

aFe POWER – Power Module (Part No.77-43012)

Spectre – Spectre Replacement Air Filter (Part No.HPR8039)

K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2287)

K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2385)

NOS/Nitrous Oxide Systems – Diesel; Nitrous System (Part No.02519NOS)

Dynomax – Ultra Flo Exhaust Muffler: Universal Fit, Stainless Steel, 25" L, 4" In, 4" Out, Oval (Part No.17557)

Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953048)

Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953049)

Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.853048)

Diablosport – i3 (Part No.8145)

SCT Performance – Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (Part No.40490)

Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)

Hypertech – Max Energy Spectrum Power Programmer for California: Adds up to 131HP, Improves Throttle Response (Part No.3050)

aFe POWER – Momentum HD Cold Air Intake: Gain up to 20 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.50-73004)

K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter (Part No.77-2582KTK)

Spectre – Spectre Air Intake Kit (Part No.9922)

aFe POWER – Momentum HD Cold Air Intake: Gain up to 12 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-73006)

K&N – Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter (Part No.77-2588KTK)

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 45% More Airflow With Dry Air Filter For Easy Maintenance (Part No.51-11872-1)

K&N – Cold Air Intake: Adds Up To 16 Horsepower, With Washable Air Filter (Part No.57-2567)

K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Washable Air Filter (Part No.57-2525-2)

Airaid – Performance Air Intake System (Part No.400-226)

K&N – Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter (Part No.71-2576)

K&N – Cold Air Intake: Adds Up To 21 Horsepower, With Washable Air Filter (Part No.57-2570)

K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter (Part No.77-2577KTK)

K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2385)

Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953049)

K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter (Part No.77-2577KTK)

K&N – Cold Air Intake: Adds Up To 16 Horsepower, With Washable Air Filter (Part No.57-2576)

K&N – Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter (Part No.71-2576)

aFe POWER – Momentum HD Cold Air Intake: Gain up to 20 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-73004)

aFe POWER – Momentum HD Cold Air Intake: Gain up to 20 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.50-73004)

aFe POWER – QUANTUM Cold Air Intake: Gain up to 18 Horsepower! Dry Air Filter For Easy Maintenance (Part No.53-10016D)

Airaid – Performance Air Intake System (Part No.400-226)

Competition Cams – XFI 214/231FORDMOD3V (Part No.127150)

Competition Cams – XFI 245/256FORDMOD3V (Part No.127650)

Competition Cams – XE256PH-12 (Part No.127400)

Competition Cams – XFI 222/239FORDMOD3V (Part No.127350)

Competition Cams – MT234/254FORDMOD 3-V (Part No.127020)

Competition Cams – XFI 222/235FORDMOD3V (Part No.127300)

Competition Cams – XFI 214/227FORDMOD3V (Part No.127100)

aFe POWER – Power Module (Part No.77-43013)