2016 Ford F-250 Super Duty Performance and Racing Products
Find Your Specific 2016 Ford F-250 Super Duty Performance and Racing Products
Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 2016 F-250 Super Duty. Advance Auto Parts has popular F-250 Super Duty parts like Performance Ignition Products, Performance Exhaust Products, Performance Oil Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other F-250 Super Duty model years including
2013,
2014,
2015,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 2016 Ford F-250 Super Duty Performance and Racing Products below and start saving instantly.
Popular 2016 Ford F-250 Super Duty Performance and Racing Products Categories
Essential Performance and Racing Products for 2016 Ford F-250 Super Duties
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9921)
from
$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- WILL NOT VOID VEHICLE WARRANTY
K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter (Part No.71-2582)
from
$524.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
aFe POWER – QUANTUM Cold Air Intake: Gain up to 6 Horsepower! Dry Air Filter For Easy Maintenance (Part No.53-10004D)
from
$390.99
Quantum Cold Air Intake Systems (Patent Pending) by aFe POWER are the latest in airflow technology for your Ford Power Stroke 6.7L (td) truck. From the uniquely integrated Filter-to-Housing design to the state of the art, lightweight injection molded base and top Pro DRY S filter, Quantum delivers dyno-proven performance gains, convenience, value and installs in minutes.
Product Features:
See More
Product Features:
- Outflows Factory Intake
- Unique Filter To Housing Interface For Easy Installation
- CAD Designed XLPE Roto-Molded Intake Tube For Optimum Airflow
- Intake Tube Heat Soak Resistant and Durable
aFe POWER – Momentum HD Cold Air Intake: Gain up to 20 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-73004)
from
$454.99
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing to the massive Pro DRY S air filter and premium hardware, we spared no expense to give you the best intake on the market.
Product Features:
See More
Product Features:
- Pro DRY S Filter Media
- 360 deg. Radial Flow Air Filter
- 3 Layer Progressive Synthetic Media
- Washable And Reusable
Dynomax – 3 Bolt Exhaust Pipe Flange Gasket: Graphoil, Heat Resistant, Premium Materials (Part No.31723)
from
$8.29
Complete your exhaust repair with DynoMax gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and DynoMax aftermarket replacement parts.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE : Designed to support undercar exhaust components
- OE DESIGN : Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from quality steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – Exhaust Tail Pipe (Part No.55102)
from
$81.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from aluminized steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – Exhaust Pipe (Part No.51073)
from
$31.49
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Rancho – Steering Damper Kit (Part No.RS98510)
from
$321.99
The Rancho dual steering stabilizer bracket kit helps you mount two steering stabilizers to your lifted Ford F-250 or F-350 truck without any modifications. A complete solution, the kit comes with two Rancho RS5000 steering stabilizers that reduce wheel shimmy, bump steer and vibration. Ideal for off-road driving and towing applications, the RS5000 steering stabilizer cuts down on steering arm fatigue to improve handling.
Product Features:
See More
Product Features:
- COMPATIBILITY – Designed for Ford F-250 and F-350 heavy-duty trucks
- IMPROVED HANDLING AND PERFORMANCE – Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
- ACCOMMODATES LARGER TIRES – Engineered for vehicles with oversized wheels and tires.
- ENGINEERED TO LAST – Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
- EASY TO INSTALL – Includes one Rancho RS5000 steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
- EASY TO INSTALL – Includes two Rancho RS5000 steering stabilizers and brackets that bolt directly to factory steering linkage with included mounting hardware; no modifications needed
- RESISTS CORROSION – Durable black powder-coated and zinc-plated brackets resist rust and corrosion
- PRECISION DESIGN – Brackets are CNC cut and bent to exact specifications for a perfect fit
- BUY WITH CONFIDENCE – Comes with Rancho’s limited warranty
Rancho – Steering Damper RS5000 (Part No.RS5415)
from
$88.99
Ideal for off-road driving, towing and street applications, Rancho RS5000 steering stabilizers enhance a vehicle’s performance and minimize on-road and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE – Reduces wheel shimmy, bump steer and vibration which helps minimize on-road or off-road driver fatigue
- ACCOMMODATES LARGER TIRES – Engineered for vehicles with oversized wheels and tires
- ENGINEERED TO LAST – Features protective boot to safeguard shock rod and oil seal
- HANDLES EXTREME TEMPERATURE CHANGES – Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
- BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
Rancho – Steering Damper RS5000 (Part No.RS5413)
from
$86.99
Ideal for off-road driving, towing and street applications, Rancho RS5000 steering stabilizers enhance a vehicle’s performance and minimize on-road and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE – Reduces wheel shimmy, bump steer and vibration which helps minimize on-road or off-road driver fatigue
- ACCOMMODATES LARGER TIRES – Engineered for vehicles with oversized wheels and tires
- ENGINEERED TO LAST – Features protective boot to safeguard shock rod and oil seal
- HANDLES EXTREME TEMPERATURE CHANGES – Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
- BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
aFe POWER – Power Module (Part No.77-43034)
from
$296.99
Increased Power and Performance:SCORCHER HD performance chips deliver significant power gains by increasing turbo boost as well as optimizing fuel injection timing and pulse width. Unlike many other chips on the market that “flash” the ECM, our performanc
Product Features:
See More
Product Features:
- +224 lbs. x ft. TQ & +133 HP
- Increases Boost Pressure and Optimizes Fuel Injection Timing
- Enhances Shift Points and Firmness
- On-the-Fly Adjustability via a 4-Position Knob
aFe POWER – Power Module (Part No.77-43012)
from
$469.99
Put up to 40hp and 51lbs. x ft. torque to your N54 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module.
Product Features:
See More
Product Features:
- Direct Plug And Play Power
- Increased Turbo Boost And Fuel Pressure
- In Cabin On The Fly Power Adjustment
- 4 Position Switch
aFe POWER – Power Module (Part No.77-43033)
from
$296.99
Increased Power and Performance:SCORCHER HD performance chips deliver significant power gains by increasing turbo boost as well as optimizing fuel injection timing and pulse width. Unlike many other chips on the market that “flash” the ECM, our performanc
Product Features:
See More
Product Features:
- +224 lbs. x ft. TQ & +133 HP
- Increases Boost Pressure and Optimizes Fuel Injection Timing
- Enhances Shift Points and Firmness
- On-the-Fly Adjustability via a 4-Position Knob
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-6001)
from
$21.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)
from
$399.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.
Product Features:
See More
Product Features:
- HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
- MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
- CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
- Reads and Erases Diagnostic Trouble Codes
- Display Over 15 Vehicle Parameters
- Installation Is Easy-10-20 Minutes
- Free Internet Updates And Upgrades
- 30 Day Money Back Guarantee
SCT Performance – Livewire TS Plus Performance Programmer and Monitor (Part No.5015P)
from
$599.99
The Livewire TS+ unlocks your vehicle’s hidden performance by re-calibrating your vehicle’s computer for maximum horsepower & torque, increased throttle response, firmer shifts, and even increased fuel mileage. The LiveWire TS+ arrives preloaded with Dyno-proven performance tune files and holds up to 10 custom tuning files for tune flexibility. Access it all on the customizable touch screen.
Product Features:
See More
Product Features:
- Using the 4″ touchscreen, track critical performance data using the on-screen virtual gauges.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease.
- Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
- Product might not be available in all states due to local laws.
SCT Performance – Preloaded Performance Programmer for Increased Horsepower & Torque (Part No.7015)
from
$399.99
The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.
Product Features:
See More
Product Features:
- Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease.
- Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
- Full color LCD display
- High-speed data logging/monitoring
- Dual analog inputs
- Most popular vehicles supported
- Installs quickly and easily
- Easy restoration back to stock
- User adjustable vehicle parameters
- USB Interface cable included
- Product might not be available in all states due to local laws.
NOS/Nitrous Oxide Systems – Diesel; Nitrous System (Part No.02519NOS)
from
$1049.99
If you think the torque of that monster diesel is something to brag about then you should feel it with the extra power of NOS. This kit works with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with 10 pound bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring and complete instructions.
Product Features:
See More
Product Features:
- Provides Additional Air Your Diesel Wants
- Additional 50 HP
- w/No Fuel System Or Electronic Upgrades
- Complete Kit For Easy Installation
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)
Motive Gear – Differential Ring and Pinion (Part No.F10.5-355PK)
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
Upgrade your 2016 Ford F-250 Super Duty with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2016 Ford F-250 Super Duty, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your F-250 Super Duty functioning at its best. At Advance Auto Parts, we offer a wide selection of 18 Performance and Racing Products for the 2016 Ford F-250 Super Duty, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Exhaust Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2016 Ford F-250 Super Duty at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $8.29 to $1,049.99, with
an average price of $306.13.
Our 18 Performance and Racing Products in stock come from 9 trusted brands, so you’re sure to find the right part for your 2016 Ford F-250 Super Duty without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2016 Ford F-250 Super Duty, we stock popular OEM and aftermarket Performance and Racing Products from top names
like SCT Performance, K&N, Rancho, and more.
SCT Performance Performance and Racing Products
start at just $399.99 and boast an impressive 5.0 stars average rating from customers.
K&N and Rancho also bring quality to the table, with Performance and Racing Products available starting at $17.99, and at an average 4.8 stars rating.
With 670 customer reviews and counting, our 2016 Ford F-250 Super Duty Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2016 Ford F-250 Super Duty is always ready to roll. We’re committed to providing you with everything you need to keep your F-250 Super Duty in top shape, all in one place.
Start shopping confidently below for your 2016 Ford F-250 Super Duty!
Best-Selling Performance Ignition Products for 2016 Ford F-250 Super Duties
Enhance the driving experience in your Ford with 1 quality Performance Ignition Product components, starting at $484.99.
aFe POWER – Power Module (Part No.77-43014)
from
$484.99
Put up to 40hp and 51lbs. x ft. torque to your N54 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module.
Product Features:
See More
Product Features:
- Direct Plug And Play Power
- Increased Turbo Boost And Fuel Pressure
- In Cabin On The Fly Power Adjustment
- 4-Power Position Settings: Stock; Sport; Sport+; And Race
Most Popular 2016 Ford F-250 Super Duty Performance Exhaust Products
Customize your Ford with 2 Performance Exhaust Products products
like Performance Exhaust Tail Pipes and
Performance Exhaust Flange Gaskets, all
priced under $31.49.
Dynomax – Exhaust Pipe (Part No.51073)
from
$31.49
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – 3 Bolt Exhaust Pipe Flange Gasket: Graphoil, Heat Resistant, Premium Materials (Part No.31723)
from
$8.29
Complete your exhaust repair with DynoMax gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and DynoMax aftermarket replacement parts.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE : Designed to support undercar exhaust components
- OE DESIGN : Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from quality steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Top Picks for 2016 Ford F-250 Super Duty Performance Oil Filters
Upgrade Ford F-250 Super Duties with top-quality Performance Oil Filters parts, including 1 OEM and aftermarket selections for your 2016 model.
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
In-Demand Performance Steering Products for 2016 Ford F-250 Super Duties
Select from 2 premium Performance Steering Products parts for your 2016 Ford F-250 Super Duty, with prices ranging from $88.99 to $321.99.
Rancho – Steering Damper RS5000 (Part No.RS5415)
from
$88.99
Ideal for off-road driving, towing and street applications, Rancho RS5000 steering stabilizers enhance a vehicle’s performance and minimize on-road and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE – Reduces wheel shimmy, bump steer and vibration which helps minimize on-road or off-road driver fatigue
- ACCOMMODATES LARGER TIRES – Engineered for vehicles with oversized wheels and tires
- ENGINEERED TO LAST – Features protective boot to safeguard shock rod and oil seal
- HANDLES EXTREME TEMPERATURE CHANGES – Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
- BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
Rancho – Steering Damper Kit (Part No.RS98510)
from
$321.99
The Rancho dual steering stabilizer bracket kit helps you mount two steering stabilizers to your lifted Ford F-250 or F-350 truck without any modifications. A complete solution, the kit comes with two Rancho RS5000 steering stabilizers that reduce wheel shimmy, bump steer and vibration. Ideal for off-road driving and towing applications, the RS5000 steering stabilizer cuts down on steering arm fatigue to improve handling.
Product Features:
See More
Product Features:
- COMPATIBILITY – Designed for Ford F-250 and F-350 heavy-duty trucks
- IMPROVED HANDLING AND PERFORMANCE – Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
- ACCOMMODATES LARGER TIRES – Engineered for vehicles with oversized wheels and tires.
- ENGINEERED TO LAST – Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
- EASY TO INSTALL – Includes one Rancho RS5000 steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
- EASY TO INSTALL – Includes two Rancho RS5000 steering stabilizers and brackets that bolt directly to factory steering linkage with included mounting hardware; no modifications needed
- RESISTS CORROSION – Durable black powder-coated and zinc-plated brackets resist rust and corrosion
- PRECISION DESIGN – Brackets are CNC cut and bent to exact specifications for a perfect fit
- BUY WITH CONFIDENCE – Comes with Rancho’s limited warranty
Most Sold 2016 Ford F-250 Super Duty Performance Air Intake Kits
Explore our best-selling Ford parts for the 2016 F-250 Super Duty among 6 OEM and aftermarket options starting from $199.99.
K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter (Part No.71-2582)
from
$524.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter (Part No.77-2582KTK)
from
$472.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Guaranteed To Increase Horsepower, With Million Mile Air Filter (Part No.57-2582)
from
$472.99
The K&N 57-2582 FIPK air intake system replaces the restrictive factory air filter and air intake housing in specific Ford F250, F350, F450 and F550 Super Duty turbo diesel models. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air with less effort than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. This air intake comes with a black powder coated metal topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and includes a K&N filter minder attached to the filter top. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and several wrenches.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
aFe POWER – QUANTUM Cold Air Intake: Gain up to 16 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.53-10003R)
from
$379.99
Quantum Cold Air Intake Systems (Patent Pending) by aFe POWER are the latest in airflow technology for your Ford Power Stroke 6.7L (td) truck. From the uniquely integrated Filter-to-Housing design to the state of the art, lightweight injection molded base and top Pro 5R filter, Quantum delivers dyno-proven performance gains, convenience, value and installs in minutes.
Product Features:
See More
Product Features:
- Outflows Factory Intake
- Unique Filter To Housing Interface For Easy Installation
- CAD Designed XLPE Roto-Molded Intake Tube For Optimum Airflow
- Intake Tube Heat Soak Resistant and Durable
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9001)
from
$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- WILL NOT VOID VEHICLE WARRANTY
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9979)
from
$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- WILL NOT VOID VEHICLE WARRANTY
- Product might not be available in all states due to local laws.
Top-Rated Performance and Racing Products Brands For Your 2016 Ford F-250 Super Duty
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2016 Ford F-250 Super Duties. Below you’ll find some of our best rated Performance and Racing Products from SCT Performance, K&N, and Rancho, and more. Performance and Racing Products from these brands that fit a 2016 F-250 Super Duty start at just $17.99 and are rated as high as 5.0 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular SCT Performance 2016 Ford F-250 Super Duty Performance and Racing Products
When it comes to maintaining or upgrading your 2016 Ford F-250 Super Duty, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. SCT Performance ticks all of those boxes. We offer a wide selection of SCT Performance Performance and Racing Products, specifically designed for the 2016 Ford F-250 Super Duty. With over 2 SCT Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $399.99, with an average price of just $499.99. Plus, with over 2 customer reviews and an average rating of 5 stars, you can trust that our SCT Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$399.99
(1)
Preloaded Performance Programmer for Increased Horsepower & Torque
“I love this tuner. My car has felt like it really woke up when I installed some of the preset tunes in it. It amazes me that they have preset tunes fo”
from
$599.99
(1)
Livewire TS Plus Performance Programmer and Monitor
“I bought it for my f350 2008 6.4 and it worked perfectly”
Popular K&N 2016 Ford F-250 Super Duty Performance and Racing Products
K&N auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2016 Ford F-250 Super Duty owner should feel confident when installing genuine K&N parts in their vehicle. To ensure the best fit and performance for your 2016 F-250 Super Duty, Advance Auto Parts carries a full inventory of 3 K&N Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these K&N Performance and Racing Products range from $17.99 to $524.99, plus, with more than 122 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$472.99
(15)
Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter
“More power -Sounds Great too. Better fuel economy. Very pleased.”
from
$17.99
(99)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
“Great product. Great service.”
from
$524.99
(8)
Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter
“5 Star Review”
FAQs for 2016 Ford F-250 Super Duty Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2016 Ford F-250 Super Duties?
Out of 18 Performance and Racing Products that fit 2016 Ford F-250 Super Duties, the following parts are the top sellers:
- Steering Damper RS5000 (20740974) – $88.99
- Steering Damper Kit (20740085) – $321.99
- Drive Shaft Pinion Yoke (20520312) – $117.99
What’s the price range for 2016 Ford F-250 Super Duty Performance and Racing Products?
Performance and Racing Product prices for the 2016 Ford F-250 Super Duty start at $8.29 and go up to $1,049.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2016 Ford F-250 Super Duty?
The average price for Performance and Racing Products for the 2016 Ford F-250 Super Duty is $306.13. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Ford F-250 Super Duty model years?
What are the cheapest Performance and Racing Products for my 2016 Ford F-250 Super Duty?
The cheapest 2016 Ford F-250 Super Duty Performance and Racing Products we carry in stock are:
- 3 Bolt Exhaust Pipe Flange Gasket: Graphoil, Heat Resistant, Premium Materials (10205751) – $8.29
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120020) – $17.99
- Differential Pinion Solid Spacer Kit w/Shims (19640050) – $22.79
- Exhaust Pipe (10206095) – $31.49
- Steering Damper RS5000 (20740974) – $88.99
What are the top-rated Performance and Racing Products that fit the 2016 Ford F-250 Super Duty?
Out of 670 reviews by customers, our 2016 Ford F-250 Super Duty Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2016 Ford F-250 Super Duty and their top-rated products:
- Performance Air Intake Kits
- Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter (10659141) – $524.99
- Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter (10282508) – $472.99
- Performance Steering Products
- Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter (10659141) – $524.99
- Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter (10282508) – $472.99
- Performance Oil Filters
- Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter (10659141) – $524.99
- Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter (10282508) – $472.99
What types of Performance and Racing Products do you sell for my 2016 Ford F-250 Super Duty?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 2016 Ford F-250 Super Duty:
Can I get help with 2016 Ford F-250 Super Duty Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.
What is your return policy for Ford F-250 Super Duty Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Ford F-250 Super Duty Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
