2005 Ford Excursion Fluids and Chemicals

Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

Product Features:

• Maximizes horsepower
• Extends gear and bearing life
• Reduces operating temperature
• Lower coefficient of friction
• Superior corrosion protection
• Separates rapidly from water
• For use with open, limited-slip and locking differential
• Contains limited-slip friction modifier
• Made in USA

PENTOSIN ATF 44 5L

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Seal conditioners rejuvenate aging engine seals to help stop and prevent oil leaks
• Extra wear protection helps prevent future engine wear
• Extra detergents help keep older engines cleaner by bonding with and removing sludge and deposits
• Anti-oxidants help prevent oil breakdown preventing engine-clogging sludge and deposit formation
• Advanced Synthetic Blend Formulation: Valvoline High Mileage with MaxLife Technology features an advanced synthetic blend that provides superior protection for engines with over 75,000 miles.
• API SN with SN PLUS Specification: Meets the API SN with SN PLUS specification, offering protection for gasoline direct-injected engines from low-speed pre-ignition, making it suitable for both high mileage and newer cars.

Only compatible with R134a refrigerant; Tools required for installation; Plastic bottle; Universal applications

Prestone® Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

• 50,000 Mile Fluid Life
• Includes Stop Leak Additives to prevent and stop power steering system leaks.
• Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
• Conventional Formula – For use in all manufacturers

Prestone® Power Steering Fluid (PSF) delivers increased system life. Designed with Anti-wear System Protection, Prestone PSF protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

• 50,000 Mile Fluid Life
• Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
• For use in all manufacturers
• Conventional Formula – For use in all manufacturers

Prestone® Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

• 50,000 Mile Fluid Life
• Includes Stop Leak Additives to prevent and stop power steering system leaks.
• Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
• Conventional Formula – For use in all manufacturers

Prestone® DOT 3 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 3. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system.  This formula is safe to use in all DOT 3 braking systems (ABS, disc or drum) and can mix with any DOT 3 fluid.  It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:

• 50,000 Mile Fluid Life
• Prevent Overheating & Brake Fade with High Grade Formula*
• Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
• Synthetic, Extended Fluid Life Formula

Prestone® MAX DOT 3 Motor Vehicle Brake Fluid is our highest grade formula, maximizing performance vs. DOT standard. Prestone MAX is our best brake fluid at protecting against overheating and brake fade. With 100,000 mile fluid life, our longest life fluid has 2X more miles between replacement than regular Prestone DOT 3. Prestone MAX has superior performance in severe braking conditions when compared to regular Prestone DOT 3, which means even more piece of mind about the braking system. This synthetic fluid starts with our highest dry boiling point giving our best protection against performance decline due to water absorption. Prestone MAX DOT 3 is safe to use in all DOT 3 braking systems, ABS, disc or drum, and can mix with any DOT 3 fluid. Mixing Prestone MAX with other fluids will lower the performance rating for miles and boil points, for best results replace completely with Prestone MAX DOT 3. It is recommended to only use the DOT fluid specified for your car. Using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:

• 100,000 Mile Fluid Life
• Prevent Overheating & Brake Fade with Our Highest Grade Formula. Prevents corrosion of all metals within the braking system.
• Superior Protection in Extreme Braking Conditions
• Synthetic, Long Life Formula – 2X Longer than regular Prestone DOT 3

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05 antifreeze/coolant uses the highest quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

• Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications
• Formulated for long life performance
• Low-silicate, low-pH and phosphate-free formula
• Helps protect all cooling system metals, including aluminum

Prestone® Platinum antifreeze+coolant is Prestone’s best universal antifreeze & coolant product. GUARANTEED to work with all vehicles; all makes, models, years & fluid colors. 15+ years, 350,000 miles of protection; the fluid is guaranteed for the life of your vehicle. This advanced product delivers Extreme Protection against both freezing temperatures (-50 Deg. F) and overheating / boiling over of the engine (+268 Deg. F). Prestone Platinum utilizes industry leading protection from engine damaging rust, corrosion, buildup & scale. While ordinary antifreeze coolant only focuses on the basic corrosion coverage, Prestone Platinum goes farther, adding our most advanced cooling sytem protection, allowing the system to run optimally, like when it was new. Internal buildup & corrosion damage can cause engine part failure or clogging, leading to expensive repairs and inconveniences. Prestone Platinum helps you avoid costly repairs and vehicles in the shop. This extended life coolant is guaranteed to work with all new engines and engine technology, while also being backwards compatible, improving protection in all older engines. Prestone Platinum antifreeze+coolant – Year Round Protection.

Product Features:

• Guaranteed to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT & IAT; G05®, G11®, G12®, G12++®, G13®, G30®, G40®, & GG40®. For all engines & engine sizes, new and older engines.
• 15+ Yr., 350,000 mile Extended life formula. The fluid is guaranteed for the life of your vehicle
• Includes our most advanced Prestone Cor-Guard® technology, unmatched cooling system parts protection that protects against engine damage; rust, corrosion, scale, build-up and clogging. Protection for 15+yrs / 350,000 miles.
• Ready to Use formula – Prediluted 56/54. Perfect for small volume top-off or complete drain and refill of the cooling system

PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for NORTH AMERICAN VEHICLES is a line of premium coolants specifically designed to match the technology and color requirements of North American vehicles. Each coolant is formulated with the same corrosion inhibitor technology that protected your vehicle straight from the factory. Color cues on the packaging and a list of covered vehicles on the front label make it easy to identify the right match for your specific vehicle. PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for NORTH AMERICAN VEHICLES – GOLD is an extended life antifreeze/coolant based on proprietary hybrid organic acid technology (HOAT). The ethylene glycol-based formula combines a mixture of organic acid corrosion inhibitors, stabilized silicate and a nitrite/nitrate combination to provide complete corrosion protection to both gasoline and diesel engines. Its low silicate formula with deposit control additives protects against wet sleeve liner cavitation and scale formation. This product’s gold color distinguishes its unique chemistry and ensures easy selection for Ford and Chrysler vehicles requiring this type of technology and coolant color. PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for NORTH AMERICAN VEHICLES – GOLD is free of phosphate, amines and 2-ethyl hexanoic acid (2-EHA) and is safe for non-metallic cooling system components. It is fully compatible with other gold hybrid coolants and meets the performance requirements of ASTM D3306, D4985 and D6210. With a complete flush and fill, PEAK guarantees this coolant will provide the service life specified by the OEMs utilizing this specific technology, typically up to 5 years or 150,000 miles.

Product Features:

• Matches technology and color requirements of North American OEMs specifying a Green Conventional coolant
• Protects all cooling system metals, including aluminum, against damaging rust and corrosion
• Compatible with other conventional green antifreeze + coolant formulations
• Easy-to-pour bottle with color-coding and vehicle applications listed on the front to simplify selecting the right antifreeze + coolant
• Available as both concentrate and 50/50 prediluted products to do the job right
• Testing Requirements: For proper freeze and boil over protection, use a traditional refractometer or hydrometer to measure the percentage of ethylene glycol by volume.

Mobil 1 advanced full synthetic motor oil 5W-30 helps to extend engine life for vehicles of all ages. Mobil 1 advanced synthetic motor oil is designed to deliver outstanding engine protection from the five factors that can damage engines over time and protect critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. Mobil 1 helps to keep your engine running at lower temperatures. (2) This technologically advanced motor oil is proven to cool engine temperatures by over 10%. (3) Its formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -30 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 advanced full synthetic motor oil meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Mobil 1 advanced full synthetic motor oil 5W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s leading synthetic motor oil brand at retail¿, recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing¿results may vary. (4) Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO Full Synthetic/52 weeks ending February 25, 2023.)

Product Features:

• Mobil 1 advanced full synthetic motor oil 5W-30 helps to protect your engine from the five factors that can damage engines over time
• Helps protect critical engine parts for up to 10,000 miles between oil changes,(1) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
• Manufacturer Part Number: 124315
• Versatile Application: Recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks.

Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

• Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
• Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
• Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
• Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
• Advanced anti-wear technology provides maximum protection to gears and bearings

Formerly known as Shell Rotella® T Triple Protection, Shell Rotella® T4 Triple Protection Heavy Duty Diesel Engine Oil is the most technically advanced Shell Rotella® formulation ever. This 15W-40 motor oil uses advanced additive technology to protect under the most severe engine conditions found in modern, low-emission engines and older hard-working diesel engines. It effectively sustains emissions control system durability where diesel particulate filters and after-treatment systems are used. Plus, it provides enhanced protection against viscosity loss due to shear and improved oil aeration compared to the previous formulation. Shell Rotella® Triple Protection Technology: Shell Rotella® T4 15W-40 heavy duty engine oil uses a proprietary formula exclusive to Shell. It is designed to provide protection in three critical areas: Acid control helps protect against corrosion from acids formed as fuel burns and the oil ages. Deposit control helps keep engines clean for optimum performance and long life. Wear control helps keep moving metal engine surfaces apart for a longer life. For Every Hardworking Need: With its wide range of specifications, and approvals from many of the world’s leading engine makers, Shell Rotella® T4 15W-40 heavy duty oil is an excellent choice for on-highway fleets, general haul, construction, agriculture, public-transport operators, diesel pickup trucks, including high-power vehicles where resistance to increased heat and stress is required. For technical questions, contact our Technical Help Desk at 1-(800) BEST-OIL or (800) 237-8645 Option 3, 1; or with complete Year/Make/Model information for a recommendation.

Product Features:

• Triple Protection® from wear, deposits and oil breakdown, this conventional Diesel Engine Oil provides exceptional wear protection for heavy duty engines for longer life(1)
• Formulated with advanced additive technology, which is engineered for superior engine cleanliness throughout the oil drain interval
• Provides increased shear stability for better viscosity control and optimal engine oil pressure
• Heightens emission control system durability and improves oil aeration
• Provides enhanced protection against oil oxidation for more efficient operation

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

• FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
• EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
• REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
• MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
• MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, MERCON LV and Allison C-4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Mobil 1 Synthetic ATF is a multi-vehicle, fully synthetic automatic transmission fluid that helps to improve overall transmission durability and cleanliness. Has exceptional thermal and oxidation stability and long-term frictional properties that help to improve and extend transmission efficiency, smooth shifting performance, and fuel economy. Mobil 1 ATF provides excellent low-temperature fluidity to promote reliable lubrication at temperatures down to -51C, and exceptional shear stability to help supports viscosity retention under the most severe heavy-duty, high-temperature operating conditions. Compatibile with mineral ATF fluids and all common seal materials to help provide excelent leakage control and reduce concern in top-off emergencies. Meets or exceeds the requirements of JASO 1-A and Ford MERCON V.

Product Features:

• Multi-vehicle, fully synthetic automatic transmission fluid that helps to improve overall transmission durability and cleanliness
• Exceptional thermal and oxidation stability to improve and extend transmission efficiency, smooth shifting performance, and fuel economy
• Excellent high and low-temperature fluidity to help support viscosity retention under extreme, heavy-duty operating conditions
• Compatibile with mineral ATF fluids and all common seal materials to help provide excelent leakage control
• Meets or exceeds the requirements of JASO 1-A and Ford MERCON V
• Manufacturer Part Number: 112980

Help keep positraction chatter down with posi additive from Yukon Gear & Axle.

Product Features:

• positraction additive
• For use in any clutch-style limited slip

FRAM DEXRON®-VI FULL SYNTHETIC ATF represents the latest technology in full  synthetic automatic transmission fluids. This product is designed for the newest  generation of highly efficient transmissions now being installed in most vehicles, and is  DEXRON®-VI licensed by GM and meets JASO 1A performance requirements. It is a fuel  efficient choice for older models as well, such as those currently using DEXRON®-III. FRAM DEXRON®-VI FULL SYNTHETIC ATF is recommended for use in all GM  DEXRON® applications and in transmissions applications calling for Toyota WS, Nissan  Matic J and Matic S, Ford part numbers XT-10-QLV and XT-6-QSP, Honda Z-1 and DW 1, and Hyundai SP-VI. Check owner’s manual for specific recommendations.

Product Features:

• Outstanding resistance to oxidative and thermal breakdown.
• Exceptional low temperature fluidity.
• Excellent anti-wear properties.
• Excellent gear shift quality throughout service life.
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
• TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

FRAM DEXRON®-VI FULL SYNTHETIC ATF represents the latest technology in full  synthetic automatic transmission fluids. This product is designed for the newest  generation of highly efficient transmissions now being installed in most vehicles, and is  DEXRON®-VI licensed by GM and meets JASO 1A performance requirements. It is a fuel  efficient choice for older models as well, such as those currently using DEXRON®-III. FRAM DEXRON®-VI FULL SYNTHETIC ATF is recommended for use in all GM  DEXRON® applications and in transmissions applications calling for Toyota WS, Nissan  Matic J and Matic S, Ford part numbers XT-10-QLV and XT-6-QSP, Honda Z-1 and DW 1, and Hyundai SP-VI. Check owner’s manual for specific recommendations.

Product Features:

• Outstanding resistance to oxidative and thermal breakdown.
• Exceptional low temperature fluidity.
• Excellent anti-wear properties.
• Excellent gear shift quality throughout service life.
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
• TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

FRAM Mercon® V ATF is for use in Ford vehicle transmissions and transaxles.  Especially formulated to exhibit better low-temperature flow and better shear-stability,  FRAM Mercon® V ATF meets Ford performance requirements of vehicles specifying  Mercon® V ATF. FRAM Mercon® V ATF is recommended for use in all transmissions,  hydraulic systems, and power steering units manufactured by American, European,  Korean, Japanese and other manufactures from around the world specifying Mercon® V  type transmission fluids.

Product Features:

• Improved foam and corrosion prevention
• Improved oxidation stability
• Promotes smooth shifting
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR TRANSMISSION
• TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

Automatic transmission fluid is a technologically advanced, low viscosity formulation specially designed to deliver performance and maximum fuel efficiency for modern automatic transmissions.

Product Features:

• Full Synthetic, low viscosity formulation
• OEM approved and licensed by Ford (MERCON® LV) and GM (DEXRON® -VI)
• Low viscosity formula for maximum fuel efficiency in modern automatic transmissions
• Enhanced friction durability for smooth transmission performance
• Superior high temperature protection to effectively resist oxidation
• Unsurpassed protection against copper corrosion
• Industry Specifications and OEM Approvals: JASO-1A
• Licensed and approved for use in: All GM vehicles (DEXRON®-VI, All previous DEXRON®); All Ford vehicles which specify Mercon® LV

Castrol Transmax ATF/CVT Universal is a technologically advanced full-synthetic formulation designed to deliver excellent performance in most of the traditional stepped automatic transmissions and Continuously Variable Transmissions currently in use. It is also suitable for use in hybrids.

Product Features:

• Coverage of over 300 specs/95% of vehicles in operation
• Broad scope of vehicle applications improves workshop efficiency and inventory management
• Enhanced friction durability for smooth transmission performance
• Superior high temperature protection to effectively resist oxidation

Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions whe

Product Features:

• Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
• Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
• Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
• Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
• Advanced anti-wear technology provides maximum protection to gears and bearings
• Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking

Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
• High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
• Developed with anti-wear technology to help improve transmission durability
• Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
• Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V