2004 Toyota Tundra Differentials

Essential 2004 Toyota Tundra Differentials

Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

Replacement Pinion Depth Shims For Dana 60, 61 & D70-U

from

$17.99
Product Features:
  • Pinion depth shims for Dana Spicer 60 and 70U
See More

Yukon Gear – Small Hole Yoke For ’82 And Older Toyota T100 And Tacoma (With Locker) With 27 Spline Pinion (Part No.41107)

Small Hole Yoke For '82 And Older Toyota T100 And Tacoma (With Locker) With 27 Spline Pinion

from

$276.99
Yukon small hole yoke for ’82 and older Toyota T100 and Tacoma (with locker) with 27 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Toyota Tacoma and T100 with factory locking differential
  • 27 spline
See More

Corteco – Axle Seal (Part No.K4021473844CFW)

Axle Seal

from

$8.51
Axle Seal

USA Standard Gear – Master Overhaul Kit For Toyota Tacoma And 4-Runner With Factory Electric Locker (Part No.37112)

Master Overhaul Kit For Toyota Tacoma And 4-Runner With Factory Electric Locker

from

$612.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Toyota Tacoma and T100 rear with factory locking differential
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and silicone.
See More

Yukon Gear – T100 & Tacoma Standard Cross Pin Shaft (Part No.33417)

T100 & Tacoma Standard Cross Pin Shaft

from

$73.99
Product Features:
  • Cross pin shaft
  • Fits Toyota Tacoma and T100
See More

Yukon Gear – Standard Open Spider Gear Kit For Toyota T100 & Tacoma With 30 Spline Axles (Part No.16133)

Standard Open Spider Gear Kit For Toyota T100 & Tacoma With 30 Spline Axles

from

$461.99
Yukon standard open spider gear kit for Toyota T100 & Tacoma with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Toytoa Tacoma and T100 open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin spider gear thrust washers.
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota V6 In A 3.73 Ratio (Part No.24588)

High Performance Ring & Pinion Gear Set For Toyota V6 In A 3.73 Ratio

from

$509.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality.

Product Features:
  • Fits Toyota V6 rear
  • 8.125″ ring gear diameter
  • 29 spline pinion
  • 10 ring gear bolts
  • 3.73 ratio
See More

Dorman – Rear Differential Cover (Part No.926-958)

Rear Differential Cover

from

$107.99
When the thin-gauge steel corrodes on Sequoia, Tacoma, Tundra truck rear differential covers, the typical solution has been to replace the entire axle. This Dorman OE FIX weld-on solution allows direct replacement of only the failed cover.

Product Features:
  • Rear Differential Cover
  • Rear Differential Cover
  • When the thin-gauge steel corrodes on Sequoia, Tacoma, Tundra truck rear differential covers, the typical solution has been to replace the entire axle. This Dorman OE FIX weld-on solution allows direct replacement of only the failed cover.
  • Direct replacement – this weld-on differential cover directly replaces a corroded original cover on certain Sequoia, Tacoma and Tundra trucks
  • Cost-effective repair – rather than buy a new axle, cut off the old cover and weld on this new one
See More

National – Bearings (Part No.32307)

Bearings

from

$53.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Oil Seal (Part No.710931)

Oil Seal

from

$36.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Compatible with most oils and EP lubricants at higher operating temperatures
  • High resistance to oxidation and ozone and has low swell in hydrocarbon fluids
  • Temperature range: -20°F to 300°F; -29°C to 149°C
  • National® oil seals are recognized worldwide for their quality and reliable performance for every type of repair.
See More

USA Standard Gear – Spartan Locker For Toyota 7.5" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17014)

Spartan Locker For Toyota 7.5" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

from

$669.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits Toyota 7.5″
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Yukon Gear – Differential (Part No.26050)

Differential

from

$759.99
Differential

Yukon Gear – Pinion Install Kit For Toyota T100 And Tacoma (Without Locking Differential) (Part No.13085)

Pinion Install Kit For Toyota T100 And Tacoma (Without Locking Differential)

from

$399.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Toyota Tacoma and T100 without factory locking differential
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – 07 And Up Tundra Rear 9.5" Pinion Gear Thrust Washer With 4.0L & 4.7L (Part No.33398)

07 And Up Tundra Rear 9.5" Pinion Gear Thrust Washer With 4.0L & 4.7L

from

$12.99
07 and up Tundra rear 9.5″ pinion gear Thrust washer W/4.0L & 4.7L.

Product Features:
  • Pinion gear thrust washer
  • Fits 9.5″ Toyota Tundra
See More

Yukon Gear – T100 & Tacoma Roll Pin (Part No.33420)

T100 & Tacoma Roll Pin

from

$8.99
Product Features:
  • Roll pin
  • Fits Toyota Tacoma and T100
See More

Yukon Gear – T100 & Tacoma Standard Side Gear Thrust Washer 1.60Mm (Part No.33399)

T100 & Tacoma Standard Side Gear Thrust Washer 1.60Mm

from

$18.99
Product Features:
  • Side gear thrust washer
  • Fits Toyota Tacoma and T100
See More

Motive Gear – Differential Gear Install Kit (Part No.TOYV6IK)

Differential Gear Install Kit

from

$42.99


Product Features:
  • TOYOTA 8″ V6&4CLY TURBO
See More

Valvoline – ATF for Mercon®V Applications Conventional, 1 Quart (Part No.822345)

ATF for Mercon®V Applications Conventional, 1 Quart

from

$12.99
Valvoline ATF for MERCON®V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON®SP, MERCON®LV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON®V, MERCON®, DEXRON®-III, DEXRON®-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON® or MERCON® fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Yukon Gear – Carrier Shim Kit For Toyota 7.5" (Part No.55038)

Carrier Shim Kit For Toyota 7.5"

from

$101.99
7.5″ V6 & 4cyl side shim kit (incl. 7 shims).

Product Features:
  • Carrier shim kit
  • Fits Toyota 7.5″
See More

Motive Gear – Differential Crush Sleeve (Part No.3954480)

Differential Crush Sleeve

from

$5.49


Product Features:
  • CRUSH SLEEVE 12 BLT CAR
See More

Yukon Gear – Master Overhaul Kit For Toyota T10.5" Differential (Part No.14173)

Master Overhaul Kit For Toyota T10.5" Differential

from

$824.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits 10.5″ Toyota Tundra rear
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and silicone.
See More

Yukon Gear – Oil Baffle (Part No.33007)

Oil Baffle

from

$7.99
Oil baffle for Toyota Landcruiser reverse rotation front, 8″ IFS front & TV6/Tacoma rear with factory locker.

Product Features:
  • Oil baffle
  • Fits Toyota Landcruiser reverse rotation front
See More

Yukon Gear – 07 And Up Tundra Front Pinion Nut (Part No.33159)

07 And Up Tundra Front Pinion Nut

from

$23.99
07 and up Tundra front pinion nut.

Product Features:
  • Pinion nut
  • Fits 2007 and up Toyota Tundra front
See More

Dorman – Pre-Pressed Rear Axle (Part No.926-143)

Pre-Pressed Rear Axle

from

$823.99
Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.

Product Features:
  • Pre-Pressed Rear Axle
  • Pre-Pressed Rear Axle
  • Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.
  • Easier installation – this pre-pressed axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box
  • Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
See More

Yukon Gear – Outer Oil Slinger (Part No.33025)

Outer Oil Slinger

from

$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.

Product Features:
  • Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
See More

Felpro – Differential Carrier Gasket (Part No.RDS 55428)

Differential Carrier Gasket

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Ring Gear Bolt (Part No.33060)

Ring Gear Bolt

from

$6.99
Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.

Product Features:
  • Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
  • 11mm x 1.0
See More

Yukon Gear – Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (Part No.33061)

Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate

from

$6.99
Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).

Product Features:
  • Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
  • 5 needed
See More

2004 Toyota Tundra Differentials

Maybe you’re in the middle of a full rebuild of that 2004 Toyota Tundra. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 97 different Differentials in our inventory ranging from $5.49 to $864.99. That means you can find the exact parts or products you need to keep that 2004 Toyota Tundra running smoothly.

Differentials are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2004 Toyota Tundra. Valvoline, Yukon Gear, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2004 Toyota Tundra, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,276 reviews in this category, some of the top rated parts include Toyota 7.5 Pinion Nut with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 2004 Toyota Tundra rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2004 Toyota Tundra Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2004 Toyota Tundra demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Tundra the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular National Differentials

We carry National parts in our stock across Front Differential Pinion Bearings categories, plus more. For a 2004 Toyota Tundra, our most popular National Differentials include:
Bearings
from $89.99
(2)
Bearings
Front Differential Pinion Bearings
Bearings
from $53.99
(1)
Bearings
Front Differential Pinion Bearings

FAQs for 2004 Toyota Tundra Differentials

What are the most purchased Differentials for the 2004 Toyota Tundra?

Out of 97 Differentials for the 2004 Toyota Tundra, the most popular in our inventory are:
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil
Differential Crush Sleeve
from $5.49
This product is not rated
Differential Crush Sleeve
Differential Crush Sleeves
Multi Purpose Seal
from $24.29
This product is not rated
Multi Purpose Seal
Differential Pinion Seals

What are the top-rated 2004 Toyota Tundra Differentials?

Top-rated Differentials for your 2004 Toyota Tundra based on customer reviews/ratings are:
Toyota 7.5 Pinion Nut
from $9.99
(1)
Toyota 7.5 Pinion Nut
“Matches OEM nut from 1995 Toyota base model 2wd pickup with 7.5″ rear diff. The casting was not as good as original, it had ripples on the mounting ”