2004 Ford Mustang Filters and PCVs
More 2004 Ford Mustang Filters and PCVs Categories
If you’re looking for an original Filters and PCVs replacement for a 2004 Ford Mustang, you can search through our selection below. You’ll also find aftermarket and OEM Filters and PCVs to meet your needs.
Essential 2004 Ford Mustang Filters and PCVs
Motorcraft – Motorcraft PCV Valve (Part No.B2040437673MTR)
from
$9.22
Every Motorcraft PCV Valve delivers the quality performance you have come to expect from Ford Motor Company products. Not only do they help keep harmful particles out of your vehicle system, but Motorcraft filters are also the only filters recommended for Ford and Lincoln vehicles.
Product Features:
See More
Product Features:
- Designed for each application – no consolidated part numbers
- Help contain contaminants inside the filter
- Recommended by Ford Motor Company
Purolator – Fuel Filter (Part No.F20235)
from
$5.49
A clogged fuel filter could lead to contaminants in the engine fluid – a common source of engine system failures. Protect fuel pumps and fuel injectors from these costly malfunctions. A Purolator® Fuel Filter scrubs fuel clean of dirt, rust and other contaminants for smooth and efficient engine performance.
Product Features:
See More
Product Features:
- Removes water from the fuel system
- Prevents rust and corrosion in your engine
- Keeps fuel contaminant free
- Replace annually for peak performance
- Meets or exceeds OE specifications
Purolator ONE – Advanced Filtration Cabin Air Filter: Up to 99% Dirt Removal; Blocks Fine Dust & Pollen (Part No.C25572)
from
$29.99
Get up to 99% Dirt Removal Power with a PurolatorONE Advanced Cabin Air Filter. Blocks odors with activated carbon. Electrostatically charged, micro-woven fiber layers remove even microscopic particles like dirt, dust, soot, pollen and other inert allergens. Improves HVAC and defroster performance, and meets or exceeds OE performance requirements. Install a new PurolatorONE Cabin Air Filter today – and breathe easy!
Product Features:
See More
Product Features:
- Activated carbon blocks odors
- Up to 99% Dirt Removal Power
- Captures airborne contaminants and inert allergens that have been known to cause respiratory issues
- Electrostatically charged, micro-woven fiber layers remove even microscopic particles like dirt, dust, soot and pollen
- Improves HVAC and defroster performance
- Meets or exceeds OE performance requirements
- Replace annually for optimal fresh, clean air
Felpro – Engine Oil Filter Adapter Gasket (Part No.70135)
from
$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
FRAM Titanium – Spin-on Oil Filter: Ideal For Synthetic Oil Protection to 20,000 miles (Part No.FS10575)
from
$12.49
FRAM Titanium advanced high-flow synthetic oil filters offer ultimate engine protection for up to 20,000 miles (32,000 kilometers). Engineered with premium synthetic blend media, FRAM Titanium provides over 99% dirt trapping efficiency.
Product Features:
See More
Product Features:
- Proven protection for up to 20,000 miles
- Total Grip textured surface for easy install and removal
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Powerflow technology allows for efficient oil flow over the filter media
ACDelco – Oil Filter: Ideal for Any Type Oil, Same Filter Installed From The Factory (Part No.PF53)
from
$11.99
ACDelco GM Original Equipment Engine Oil Filters are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These filters help ensure a clean supply of oil to engine components. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
Product Features:
See More
Product Features:
- Helps keep abrasive particles away from bearings and other engine hydraulic components
- Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
- ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Automatic Transmission Filter Kit: Sump, Original Equipment Fit, Form And Function, 1 Pack (Part No.85927)
from
$11.49
Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.
Product Features:
See More
Product Features:
- Guaranteed OE quality form, fit and function
- Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
- Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.
Carquest Premium – Automatic Transmission Filter Kit: Sump, Original Equipment Fit, Form And Function, 1 Pack (Part No.85939)
from
$14.99
Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.
Product Features:
See More
Product Features:
- Guaranteed OE quality form, fit and function
- Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
- Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.
Dorman – Help – PCV Valve Grommet – 0.715 In. ID – 1.440 In. OD – 0.493 In. Thickness (Part No.42049)
from
$5.99
This PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles
- Restores functionality – this grommet is made to fit and fully restore part functionality after the original grommet fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – PCV Grommet – 0.712 ID – 1.477 In. OD – 0.990 In. Thickness (Part No.42327)
from
$7.99
This PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles
- Restores functionality – this grommet is made to fit and fully restore part functionality after the original grommet fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Ford Radiator Core Support Retainer (Part No.961-055D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Pilot Point Engine Oil Drain Plug: M14-1.50 Thread, 16 mm Head, 1 Pack (Part No.090-053CD)
from
$4.99
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Standard Engine Oil Drain Plug: 1/2-20 Thread, 7/8 " Head, 1 Pack (Part No.090-005CD)
from
$5.49
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Victor Reinz – Engine Oil Drain Plug Gasket (Part No.71-13462-00)
from
$1.99
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Felpro – Engine Oil Drain Plug Gasket (Part No.70822)
from
$0.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Motorcraft – Automatic Transmission Filter: Original Equipment on Ford Motor Company Vehicles, 1 Pack (Part No.FT-105)
from
$27.99
Replacement original equipment transmission filters remove contaminants from the fluid, to help the transmission operate as designed. Motorcraft® Automatic Transmission Filters are designed, engineered and tested to help ensure peak transmission performance throughout the life of the filter. Filtration and hydraulic performance testing is performed according to procedures approved by the International Organization for Standardization (ISO) FT-180 © 2021 Ford Motor Company OM-PRJ-1912-0072 Motorcraft® is a registered trademark of Ford Motor Company Filter bypass screen
Product Features:
See More
Product Features:
- Each original equipment filter meets the specific needs of its application and intended service life
- Filtration efficiency is fine tuned to match each transmission’s fluid cleanliness requirements to help ensure transmission durability throughout the intended life cycle
- Original equipment Filters are engineered to maintain fluid flow rates even as wear debris accumulates
- Filter housings are constructed from advanced fiber reinforced temperature-resistant polymers or a combination of polymers and stamped steel
- Filtration and hydraulic performance testing is performed according to procedures approved by the International Organization for Standardization (ISO) FT-180 © 2021 Ford Motor Company OM-PRJ-1912-0072 Motorcraft® is a registered trademark of Ford Motor Co
Carquest Premium – High-Performance Transmission Filter for Smooth Shifting & Ext. Gearbox Life (Part No.95288)
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-5029)
from
$64.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
- ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
- MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2431)
from
$89.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
- ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
- MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
Felpro – OIL FILTER ADAPTER GASKET (Part No.ES 73131)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Felpro – OIL FILTER ADAPTER GASKET SET (Part No.ES 73132)
from
$30.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Imperial – Remote Mount Filter Kit – Universal (Part No.240291)
from
$95.99
For use when relocating the oil filter is necessary. Includes all required hardware except hoses.
Product Features:
See More
Product Features:
- Remote mount filter kit
- For use when relocation of the oil filter is necessary
- Comes with all necessary hardware except hoses
Mahle – Engine Oil Filter Housing Gasket (Part No.A6005196761MAH)
from
$9.81
Regardless of what application you are trying to seal, you can count on MAHLE Aftermarket doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket distributor offers the Application Engineered approach to sealing an engine.
Product Features:
See More
Product Features:
- No joints means increased durability
- Sealants not required
- Compression limiters prevent over-tightening
- No torque loss or shrinkage
Popular 2004 Ford Mustang Filters and PCVs Categories
2004 Ford Mustang Filters and PCVs
You count on your 2004 Ford Mustang to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Filters and PCVs. With 79 Filters and PCVs ranging in price from $1.76 to $221.63, you’re sure to find everything you need for your 2004 Ford Mustang.
Brands matter. If you want to shop a specific Filters and PCVs brand, we stock 18 different brands like Motorcraft, Mobil Oil, and Carquest Premium. 2004 Ford Mustang Filters and PCVs start as low as $1.76!
One of the best ways to find top quality OEM or aftermarket Filters and PCVs is by asking professionals. Short of that, you can shop with confidence thanks to our 4,433 extensive product reviews on 2004 Ford Mustang Filters and PCVs. Some of the top-rated Filters and PCVs products we carry are 5/16" Inlet-Outlet Metal In-Line Fuel Filter with 4.7 stars and Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 Miles with 4.7 stars.
Did we mention you can order your Filters and PCVs from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Filters and PCVs inventory for your 2004 Ford Mustang below to get started!
Top-Rated Filters and PCVs Brands For Your 2004 Ford Mustang
Trusted Filters and PCVs OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Ford Mustang running right for years to come. In our inventory you’ll find brands like Motorcraft, Mobil Oil, Carquest Premium, and even more.
Popular K&N Filters and PCVs
You’ll find popular K&N brand products across Oil Filters. All are waiting to get your 2004 Ford Mustang back on the road. Some of the top-rated K&N products in these categories are:
from
$17.99
(42)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Oil Filters
Top-Rated Motorcraft Filters and PCVs
If Motorcraft are what you’re looking for, our inventory holds plenty. We stock Motorcraft brand Filters and PCVs for your 2004 Ford Mustang, and some of our most reviewed Motorcraft parts include:
from
$13.99
(513)
Original Equipment Oil Filter: Ideal for Any Type Oil, Built To Meet Ford’s Standards
Oil Filters
from
$13.99
(157)
Original Equipment Oil Filter: Ideal for Any Type Oil, Built To Meet Ford’s Standards
Oil Filters
from
$27.99
(127)
Original Equipment Engine Air Filter: Standard Duty, Manufactured To Meet Ford’s Standards
Air Filters
FAQs for 2004 Ford Mustang Filters and PCVs
What are the most purchased Filters and PCVs for the 2004 Ford Mustang?
Out of 79 Filters and PCVs for the 2004 Ford Mustang, the most popular in our inventory are:
from
$15.49
This product is not rated
Oil Filter: Ideal for Synthetic Oil, Protection To 20,000 Miles
Oil Filters
from
$4.99
This product is not rated
Pilot Point Engine Oil Drain Plug: M14-1.50 Thread, 16 mm Head, 1 Pack
Oil Pan Drain Plugs
from
$10.99
(126)
Oil Filter: Ideal for High Mileage & Synthetic Oil, Protects to 15,000 miles
Oil Filters
What are the top-rated 2004 Ford Mustang Filters and PCVs?
Top-rated Filters and PCVs for your 2004 Ford Mustang based on customer reviews/ratings are:
from
$19.99
(147)
5/16" Inlet-Outlet Metal In-Line Fuel Filter
“works as it should, easy install, no leaks.”
from
$10.99
(98)
Oil Filter: Ideal for High Mileage & Synthetic Oil, Protects to 15,000 miles
“Easy install and worked great!”
