2003 Ford F-250 Super Duty Engine Parts

When turbochargers fail, the common response is the replacement of the entire unit. However, the damage is often isolated within the turbo cartridge, which contains the core components of the turbo assembly. By replacing just the cartridge, the remaining components can be salvaged and repair times reduced. Rotomaster cartridges are assembled with O.E.-grade components to ensure high performance and durability.

Product Features:

• Eliminates the need to replace the entire turbocharger
• Allows for reuse of the original compressor and turbine housings
• Direct O.E. replacement
• Allows for replacement of turbocharger without the need for balancing
• Supplied with O.E.-grade components for durability

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Validated for fit, form and function
• Unsurpassed quality you can trust

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.

Product Features:

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
• Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
• Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
• Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
• Road tested to ensure real world performance and to verify that each design meets our high standards for quality
• Coating salt spray tested for over 200 hours to insure durability

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

• Provides proper seal to ensure leak prevention
• Stops engine blow by
• High quality construction
• Meets all OEM specifications

Advanced FLOW engineering (aFe) is a manufacturer of automotive cold air intake systems, performance air filters, fluid filters, intake manifolds turbochargers, programmers, throttle body spacers and exhaust systems. aFe was founded in 1999 and is headquartered in Corona, California, USA, in two facilities totaling 160,000 sq ft (15,000 m2) including their 77,000 sq ft (7,200 m2) headquarters and manufacturing facilities. An 87,000 sq ft (8,100 m2) warehouse and R& D facility was added in 2012.

Product Features:

• Outflows Stock Charge Pipe
• Mandrel Bent Aluminum Tubing For Increased Flow
• Powder coat Wrinkle Black For Heat Resistance
• Hot Side Tube Fitment

Rotomaster Remanufactured Turbochargers meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster Turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back to peak performance with these direct-replacement turbochargers.

Product Features:

• All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
• Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
• All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
• 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
• Each unit comes with a pre-lube syringe to ensure product protection during installation.

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Steel-backed Babbitt lining material
• Used in automotive and high-performance
• Babbitt is designed to perform under extreme loads w/o damaging other engine parts
• Babbitt is more environmentally friendly than other material
• ISO & QS certified manufacturing

Gates Turbocharger Hose Kits offer the convenience of a complete solution in one kit. Not only are all the parts included, but the turbocharger hose features a construction far superior to the Original Equipment Manufacturer (OEM) equivalent.

Product Features:

• High-quality silicone cover provides extreme temperature resistance in high-temperature under-hood conditions
• Increased durability due to multiple layers of reinforcement, resulting in longer service life
• Specially formulated oil-resistant Fluorelastomer liner prevents damage
• T-bolt clamps with stainless steel band and bridge both resist corrosion and provide higher torque for optimal sealing
• The T-Bolt clamps feature a 301 stainless steel band and bridge to resist corrosion better than carbon steel bands.
• The stainless steel bands, produced with fully rounded edges, prevent hose damage.
• T-Bolt Clamps come with a nut to minimize loosening.

CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.

Product Features:

• Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
• Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
• On-car vehicle validation is done to test durability and performance.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

• All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
• MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
• MAHLE gaskets is the leader in Domestic, Asian and European applications
• The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool
• Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Helps improve cylinder sealing for less blow-by
• Retains standard ring gaps in top groove
• DUROSHIELD« skirt-coated piston
• Moly-graphite coating extends engine life
• Reduces friction for higher fuel economy
• Prevents damage from inadequate lubrication on start-up

This BladeRunner Intercooler represents the next generation of intercoolers. The BladeRunner intercoolers utilize a 3.15″ thick bar and plate design that is 44% larger than stock and outflows OE style tube and fin core designs by 40%! Silicone Couplers with beads are used for a leak-free seal. No blowouts with this coupler. End Tanks: The unique BladeRunner end tanks are constructed out of 3/16″ TIG welded aluminum plate tanks that incorporate three multi-directional vanes. Multi-Directional Vane Technology: The BladeRunner MDV technology is used to direct hot air flow through the entire intercooler core. This allows for greater cooling than competitors units. 3.15″ Thick Bar and Plate Core: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the OEM. Multiple Auxiliary Ports: Four tapped 1/8″ ports are supplied on the tanks for easy installation of gauges or nitrous oxide systems. Billet Aluminum Inlet/Outlets: Each BladeRunner Intercooler uses billet aluminum inlets and outlets for superior strength and durability. The 3-1/2″ inlet/outlet with reducer couplings to match stock tubes. Tig-Welded: 100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. Flow and Performance: The intercooler tube is constructed of 3″ mandrel bent powder-coated stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. Comes complete with 4-ply heavy duty couplings and constant tension T-bolt clamps for a tight and secure installation. The BladeRunner Intercooler is test pressure rated at 200psi which is perfect for high boost applications. Don’t waste your time and money on modified factory intercoolers. Invest in the aFe BladeRunner intercooler, the most sophisticated intercooler design on the planet.

Product Features:

• 100% TIG-Welded For Strength And Durability
• Intercooler Is Test Pressure Rated At 200 PSI
• Stainless Steel Tubes
• Powder coat Black Tubes For Heat Resistance

This replacement turbocharger up pipe has been engineered to match the function and performance of the original up pipe on select vehicle years, makes and models.

Product Features:

• Direct replacement – this turbocharger up pipe matches the fit and function of the original equipment up pipe on specified vehicles
• Durable materials – strong tubular construction protects against warping or cracking
• Application specific – reverse engineered from the original design on certain vehicle years, makes and models
• Trustworthy quality – backed by team of engineers and quality specialists in the United States

Oil Pick-up Tube O-R

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

• Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Refer to our online catalog for detailed application-specific information

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Steel-backed bronze alloy lining with overplate
• Popular for fatigue resistance & strength
• Provides conformability required for older apps
• Our standard material is comparable to competitors performance bearing
• Note – This material offers less resistance to wear & corrosion than other materials.
• Utilizes ISO & QS certified manufacturing

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

The VGT Solenoid plays a vital role in delivering optimum boost levels to turbocharged vehicles. CARDONE VGT Solenoids are assembled with O.E.-grade components to ensure high performance and durability. As a direct O.E.-replacement, ease of installation is guaranteed and all required seals are included.

Product Features:

• Direct O.E. replacement
• Includes all required seals for installation
• Assembled only with O.E.-grade component parts for durability
• Restores precision control of vanes in a Variable Geometry Turbocharger

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing..

Product Features:

• Direct replacement – this valve cover matches the original equipment part for fit and function.
• Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
• Cost-effective solution – offers original equipment performance at competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:

• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Meet or exceed OEM performance requirements
• Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

Rotomaster New Exhaust Adapters are a great upgrade to the factory-installed adapters that come equipped with an exhaust back pressure valve (EBPV). The stock valves have a tendency to stick from soot build up or a faulty electrical signal and can cause exhaust obstructions. This raises the exhaust gas temperature and can also cause a loss of response from the turbocharger. Rotomaster Exhaust Adapters are a direct O.E. replacement that removes the factory EBPV and provides a smooth exit for the exhaust gases to pass through the turbine wheel. Manufactured using O.E.-grade material, these adapters will reduce restrictions and prolong turbocharger life.

Product Features:

• Direct O.E. replacement
• Manufactured utilizing O.E. grade material for durability
• Less restriction/ improved exhaust flow
• Eliminates problematic exhaust back pressure valve
• Prolongs turbocharger service life

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

• Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
• Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
• Cost-effective solution – offers original equipment quality at a competitive price
• Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

Water Crossover Moun

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Manufactured for the repair environment
• Unsurpassed quality you can trust

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Head sets without head gasket(s)
• Requires purchase of head gasket(s) separately
• Premium quality parts
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Contains all the parts needed to complete the repair unless otherwise noted
• Contains all the parts needed to complete the repair unless otherwise noted