from

$37.99

This air filter housing clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this air filter housing clamp is designed to match the fit and function of the original clamp on specified vehicles
Restores functionality – this clamp is made to fit and fully restore part functionality after the original clamp fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$24.99

Helps prevent stalling, poor starting and potential engine failure. Improves vehicle performance by ensuring a uniform fuel flow. Blocks impurities and contaminants in your fuel or gas tank before they can enter your engine or clog your injectors.

Product Features:

Removes 90% of particles 20 microns or larger
Connector and support washers are brazed for enhanced durability and strength
300-series stainless steel case provides excellent corrosion resistance

from

$35.99

Replacement original equipment transmission filters remove contaminants from the fluid, to help the transmission operate as designed. Motorcraft® Automatic Transmission Filters are designed, engineered and tested to help ensure peak transmission performance throughout the life of the filter. Filtration and hydraulic performance testing is performed according to procedures approved by the International Organization for Standardization (ISO) FT-180 © 2021 Ford Motor Company OM-PRJ-1912-0072 Motorcraft® is a registered trademark of Ford Motor Company Filter bypass screen

Product Features:

Each original equipment filter meets the specific needs of its application and intended service life
Filtration efficiency is fine tuned to match each transmission’s fluid cleanliness requirements to help ensure transmission durability throughout the intended life cycle
Original equipment Filters are engineered to maintain fluid flow rates even as wear debris accumulates
Filter housings are constructed from advanced fiber reinforced temperature-resistant polymers or a combination of polymers and stamped steel
Filtration and hydraulic performance testing is performed according to procedures approved by the International Organization for Standardization (ISO) FT-180 © 2021 Ford Motor Company OM-PRJ-1912-0072 Motorcraft® is a registered trademark of Ford Motor Co

from

$18.29

Mobil 1¿ Extended Performance Oil Filters are built with strong, durable components and are tested and proven to protect 2X as long as auto manufacturers¿ recommended oil change intervals. A high-efficiency synthetic blend media removes over 99% of harmful contaminants keeping oil cleaner, longer. Enhanced nitrile gasket remains pliable to help prevent oil leaks while a durable anti-drain back valve protects against dry starts. Durable, heavy-duty filter canister withstands 9X the normal vehicle oil system operating pressure. These are just some of the advanced technologies that go into making an oil filter that can provide proven protection for up to one full year or 20,000 miles. Meets requirements of the Mobil 1¿ annual protection limited warranty.

Product Features:

Protects for 20,000 Miles or up to 1 year – GUARANTEED*
Tested and proven to protect 2X as long as auto manufacturers’ recommended oil change intervals
Removes over 99% of contaminants – synthetic blend media keeps oil cleaner and holds more dirt than economy filters
Heavy duty canister withstands 9x the normal vehicle oil system operating pressure
Designed for use with all engine oil types and brands

from

$19.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$65.12

WARNING: This item cannot be returned for a replacement or refund if opened! Designed from high quality materials to withstand extreme underhood temperatures, Dorman’s Engine Oil Cooler Gasket Set provides a tight, leak-resistant seal for the Engine Oil Cooler. The gaskets are recommended for replacement every time you replace the Oil Cooler.

Product Features:

Direct replacement for a proper fit
Kit includes all necessary gaskets as well as o-rings
Helps protect engine against possible costly damage
Vehicle try-on testing has been conducted on this part to ensure long-lasting performance

from

$49.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$89.84

Every Motorcraft PCV Valve delivers the quality performance you have come to expect from Ford Motor Company products. Not only do they help keep harmful particles out of your vehicle system, but Motorcraft filters are also the only filters recommended for Ford and Lincoln vehicles.

Product Features:

Designed for each application – no consolidated part numbers
Help contain contaminants inside the filter
Recommended by Ford Motor Company

from

$15.99

Fuel separator leaking? It could be as simple as worn or cracked O-ring seals. Don’t replace the whole fuel separator, just reseal it with this O-ring kit.

Product Features:

Direct replacement – this O-ring kit easily repairs a leaking water separator
Money-saving repair – this seal kit repairs a leaking separator valve without having to replace the entire part
Easy installation – no special tools required
Quality materials – O-rings made from original-spec material for durability

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$45.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$95.99

For use when relocating the oil filter is necessary. Includes all required hardware except hoses.

Product Features:

Remote mount filter kit
For use when relocation of the oil filter is necessary
Comes with all necessary hardware except hoses

from

$1.76

Oil Drain Plug Gaske

from

$6.49

These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:

Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
Restores functionality – built to restore a proper seal
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$162.14

Crankcase Gasket Set

from

$228.85

Engine Conversion Ga

from

$17.99

Carquest Standard engine air filters are designed to remove airborne contaminants and optimize engine performance in all driving conditions. Each air filter features cured filter media that increases tensile strength, allowing the filter to maintain high-pressure requirements without collapse. Carquest Standard air filters use a polyurethane construction that provides higher tear strength and more structural support. Our Carquest Standard air filters meet original equipment (O.E.) standards and fulfill the requirements for maintaining a new vehicle warranty.

from

$26.99

Replacing an air filter every 12 months or 12,000 miles can have a significant impact on engine performance and efficiency. PurolatorONE┐ Air Filters trap up to 99% of dirt, dust, soot and other debris, helping to protect your engine from damage. A new air filter may also help prevent engine wear, improve fuel efficiency and can even improve acceleration by up to 11% (U.S. DOE study). PurolatorONE Air Filters are widely available for most passenger cars and light trucks on the road today. Changing your air filter regularly is an easy way to keep your engine running at peak performance. Full synthetic or highly embossed media for superior strength and dirt holding capacity; Blocks up to 99% of damaging dirt, soot and debris from entering your engine. Optimizes engine airflow with precision fit polyurethane framingHelps improve acceleration and boost engine efficiency. Employs steel grid backing, ridge supports or polyamide high temperature glue beads to provide superior strength and stability. Meets or exceeds OE specifications; Trusted OE supplier

from

$23.99

FRAM Drive engine air filter prevents damaging road dust and dirt particles from entering your vehicle’s engine. Replacing your engine air filter every 12 months can help improve acceleration and optimizes overall engine efficiency.

Product Features:

Proven performance for up to 12 months
Installs quickly in as little as 5 minutes
Provides trusted protection by trapping dirt, dust, and other harmful contaminants

from

$5.99

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$7.99

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$6.29

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$4.49

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$28.99

AUTO TRANS FLTR KT

from

$42.99

AT IN-LINE FLTR 5/16

from

$27.99

Replacement original equipment transmission filters remove contaminants from the fluid, to help the transmission operate as designed. Motorcraft® Automatic Transmission Filters are designed, engineered and tested to help ensure peak transmission performance throughout the life of the filter. Filtration and hydraulic performance testing is performed according to procedures approved by the International Organization for Standardization (ISO) FT-180 © 2021 Ford Motor Company OM-PRJ-1912-0072 Motorcraft® is a registered trademark of Ford Motor Company Filter bypass screen

Product Features:

Each original equipment filter meets the specific needs of its application and intended service life
Filtration efficiency is fine tuned to match each transmission’s fluid cleanliness requirements to help ensure transmission durability throughout the intended life cycle
Original equipment Filters are engineered to maintain fluid flow rates even as wear debris accumulates
Filter housings are constructed from advanced fiber reinforced temperature-resistant polymers or a combination of polymers and stamped steel
Filtration and hydraulic performance testing is performed according to procedures approved by the International Organization for Standardization (ISO) FT-180 © 2021 Ford Motor Company OM-PRJ-1912-0072 Motorcraft® is a registered trademark of Ford Motor Co

from

$30.99

Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.

Product Features:

Guaranteed OE quality form, fit and function
Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.

2003 Ford E-350 Super Duty Filters and PCVs

More 2003 Ford E-350 Super Duty Filters and PCVs Categories

Essential 2003 Ford E-350 Super Duty Filters and PCVs

Dorman – Help – Air Filter Housing Clamp (Part No.41047CD)

Motorcraft – Original Equipment Fuel Filter (Part No.FG-872)

Motorcraft – Automatic Transmission Filter: Original Equipment on Ford Motor Company Vehicles, 1 Pack (Part No.FT-187)

Mobil 1 – MOBIL 1 – OIL FILTER (Part No.M1-601A)

Felpro – Engine Oil Filter Adapter Gasket (Part No.70801)

Dorman – 904-224 Oil Cooler Gasket Kit Includes Gaskets and O-rings (Part No.A6071829230DOR)

Carquest Premium – PCV Valve (Part No.PCA1094)

Motorcraft – Motorcraft PCV Valve (Part No.B2040352423MTR)

Dorman – Fuel Bowl Drain Valve O-Rings (Part No.904-020)

Felpro – Engine Crankcase Vent Valve Seal (Part No.ES 73177)

MAHLE Original – Injector O-Rings (Part No.GS33445)

Imperial – Remote Mount Filter Kit – Universal (Part No.240291)

Mahle – Oil Drain Plug Gaske (Part No.A6120197370MAH)

Dorman – Copper Drain Plug Gasket, Fits .5 D.O., 9/16, M14 S.O. (Part No.65399)

Felpro – Engine Oil Drain Plug Gasket (Part No.72515)

Mahle – Crankcase Gasket Set (Part No.A8020353641MAH)

Mahle – Engine Conversion Ga (Part No.A80011700664MAH)

Carquest Standard – Engine Air Filter: Meets Original Equipment Specifications (Part No.R88418)

Purolator ONE – Advanced Filtration Engine Air Filter: Full Synthetic Highly Embossed Media, Up To 99% Dirt Removal (Part No.A34878)

FRAM Drive – Engine Air Filter: Standard, Meets or Exceeds Manufacturer Specifications (Part No.FDA8039)

Dorman – Help – Standard Engine Oil Drain Plug: M14-1.25 Thread, 15 mm Head, 1 Pack (Part No.69016)

Dorman – Standard Engine Oil Drain Plug: M12-1.75 Thread, 15 mm Head, 1 Pack (Part No.65430)

Dorman – Magnetic Engine Oil Drain Plug: M14-1.25 Thread, 19 mm Head, 1 Pack (Part No.090-149.1)

Dorman – Pilot Point Engine Oil Drain Plug: M14-1.25 Thread, 14 mm Head, 1 Pack (Part No.090-076CD)

ATP – AUTO TRANS FLTR KT (Part No.IL-160)

ATP – AT IN-LINE FLTR 5/16 (Part No.JX-150)

Motorcraft – Automatic Transmission Filter: Original Equipment on Ford Motor Company Vehicles, 1 Pack (Part No.FT-105)

Carquest Premium – Automatic Transmission Filter Kit: Sump, Original Equipment Fit, Form And Function, 1 Pack (Part No.85955)

Popular 2003 Ford E-350 Super Duty Filters and PCVs Categories

2003 Ford E-350 Super Duty Filters and PCVs

Top-Rated Filters and PCVs Brands For Your 2003 Ford E-350 Super Duty

Popular K&N Filters and PCVs

Top-Rated Motorcraft Filters and PCVs

FAQs for 2003 Ford E-350 Super Duty Filters and PCVs

What are the most purchased Filters and PCVs for the 2003 Ford E-350 Super Duty?

What are the top-rated 2003 Ford E-350 Super Duty Filters and PCVs?