2002 Ford F-250 Super Duty Performance and Racing Products
Find Your Specific 2002 Ford F-250 Super Duty Performance and Racing Products
Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 2002 F-250 Super Duty. Advance Auto Parts has popular F-250 Super Duty parts like Performance Oil Filters, Performance Exhaust Products, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other F-250 Super Duty model years including
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 2002 Ford F-250 Super Duty Performance and Racing Products below and start saving instantly.
Popular 2002 Ford F-250 Super Duty Performance and Racing Products Categories
Essential Performance and Racing Products for 2002 Ford F-250 Super Duties
Energy Suspension – Hyper-Flex System (Part No.4.18124R)
from
$359.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Energy Suspension – Axle Pivot Bushing Set (Part No.4.3121G)
from
$29.99
Product Features:
See More
- Firm in the Center Yet Soft on the Outside
- Allows Flex and Pivot When Needed
Energy Suspension – Sway Bar Bushing Set (Part No.4.5103R)
from
$32.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Spectre – Spectre Replacement Air Filter (Part No.HPR8039)
from
$49.99
This Spectre OEM replacement air filter is an easy to install performance option for the stock cone shaped air filter in multiple Ford applications. With its HPR (High Performance Replacement) synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock oval and egg shaped Ford air filter housings, this air filter includes sealing gaskets at the base of the air filter to insure a proper seal for great engine protection.
Product Features:
See More
Product Features:
- HPR OE Replacement Air Filter
- High flow replacement filter designed to fit perfectly in your stock air box
- Engineered for increased flow and greater performance
- Fits multiple Ford applications
- Factory pre-oiled and ready to use
- Easy to install with no special tools or skills required
Rancho – Steering Damper Bracket (Part No.RS5542)
from
$85.99
Designed to mount a dual steering stabilizer to a Ford® F-250, F-350 or Excursion without any modifications, the Rancho® dual steering stabilizer bracket is made of high-strength, low-alloy steel and includes the mounting hardware for easy installation.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for Ford F-250 and F-350 heavy-duty trucks and Ford Excursion SUVs with Rancho RS5000® steering stabilizers
- ENHANCES PERFORMANCE — Protects dual steering stabilizer from contacting other components at full jounce travel ideal for off-roading, towing/hauling and street performance applications
- RESISTS CORROSION — Durable black powder-coat finish resists rust and corrosion
- ENGINEERED TO LAST — Features 0.25-in. high-strength, low-alloy steel construction for long life
- EASY TO INSTALL — Bolts directly to factory steering linkage with included mounting hardware, no modifications needed
- PRECISION DESIGN — Brackets are CNC cut and bent to exact specifications for a perfect fit
MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)
from
$176.99
Using MSD’s DIS-4 ignition systems on your coil-on-plug Ford has always been a great upgrade, but honestly, the wiring poses quite a challenge. To ease this install, we now offer a wiring harness kit that’ll make the install nearly a direct plug-in. The harness provides a splice-free installation with connectors that plug directly into the factory unit. They even have corresponding wire colors. When used in conjunction with two DIS-4 ignitions and four dual ignition Adapters, PN 89121, your coil-on-plug Ford will receive all the spark it needs plus a two-step rev limit and step retard. And the best part is wiring will only take about an hour.
Product Features:
See More
Product Features:
- Easily install two DIS-4 Ignitions on late model Ford Engines
- Easy Connections w/No Splicing Or Cutting Into Factory Wiring
- Wiring the system will take only an hour
- Multiple direct plug in connectors
- Wiring the system will only take and hour
Hays – Flywheels (Part No.12-071)
from
$163.99
Flywheels
Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953048)
from
$133.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.53058)
from
$185.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-6001)
from
$24.29
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Dynomax – Exhaust Systems (Part No.19332)
from
$361.99
All Dynomax Performance Exhaust Systems bolt on for easier installation. Customize your vehicle’s complete exhaust quickly with an emissions-legal premium performance system from Dynomax.
See More
Dynomax – Dual – 3in-2.5in Cat-Back Exhaust System – Super Turbo Muffler: Aluminized Steel (Part No.17313)
from
$529.99
Give your Ford F-250 or F-350’s exhaust system an upgrade with a DynoMax Super Turbo dual 3-in./2.5-in. cat-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow, reduces turbulence and absorbs unwanted interior resonance for a mellow tone.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for 1999-2004 Ford F-250 and F-350 5.4L V8 and 6.8L V10; 137-in., 142-in., 156-in., 158-in., 172-in. wheelbases; excludes chassis cab; see product information for compatibility and engine specs
- COMPLETE SOLUTION — Includes DynoMax Super Turbo muffler, pipes, hangers, clamps and cable ties
- EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
- EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
- IMPROVED FLOW CAPACITY — Aluminized-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- PRECISION DESIGN — Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications; dyno proven to flow up to 671 SCFM
- PREMIUM PERFORMANCE — Large flow tubes improve exhaust flow and reduce backpressure
- ENGINEERED TO LAST¿– Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
- ENGINEERED TO LAST┐– Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
- NOTES — Exits in rear on either side of license plate; 2.5-in. straight cut tail pipes
Flowmaster Inc. – Turbo Downpipe – 4.00 in. Pipes Only No Mufflers (Part No.1078)
from
$172.99
Designed to replace the often crimped and restrictive OEM pipe that comes off the turbocharger outlet. 4.00 in. mandrel bent tubing for maximum flow.
See More
aFe POWER – Momentum GT Cold Air Intake: Gain up to 15 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-73116)
from
$498.99
Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to block off the auxiliary air inlet. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded designed intake tube to fit with the stock mechanical fan and achieve maximum power gains while maintaining a perfect fit. Large 3-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive oval flange and is 9″ tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: High quality premium clamps ensures the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
Product Features:
See More
Product Features:
- CAD-Designed Roto-Molded Intake Tube
- High Quality 1-Piece Sealed Housing w/Aux. Air Inlet
- 3 Layer Progressively Finer Porosity Synthetic Media
- Built In Sight Window Provides Easy Inspection Of Filter
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.57-2525-2)
from
$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Bully Dog – Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device (Part No.40417)
from
$469.99
This Bully Dog GT Platinum tuner is four products in one: a vehicle engine tuner, monitor, gauge, and diagnostic device.ÿ
Product Features:
See More
Product Features:
- Dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy, and providing a comprehensive set of monitoring features and diagnostic functions.
- Bully Dog GT Platinum tuners are incomparable to other tuning products because they have the largest feature set and the widest range of vehicle applications available.
- Product might not be available in all states due to local laws.
Bully Dog – Diesel Performance Tuner with Gauges & Customizable Tuning (Part No.40420)
from
$469.99
The GT Gas and Diesel tuners unlock more horsepower and torque to meet the unique demands you put on your vehicle. With preloaded tuning, customizable gauges to track performance, and a wide variety of hauling and off-roading features, you’ll have plenty of power to take on tough jobs or improved fuel economy for long highway hauls.
Product Features:
See More
Product Features:
- Track critical performance data in real-time on easy to navigate virtual gauges
- Select between multiple street-tested, dyno-proven tunes for economy, towing or performance.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease
- Manage tire size, gear ratio, speed limiter, speedometer calibrations, shift points, and more. Offering shift-on-the-fly tuning and better control of defueling and regeneration.
- Product might not be available in all states due to local laws.
Energy Suspension – Leaf Spring Bushing Set (Part No.4.2148G)
from
$95.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Energy Suspension – Leaf Spring Bushing Set (Part No.4.2147R)
from
$102.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Dynomax – 36263 Exhaust Bracket (Part No.36263)
from
$37.49
Complete your exhaust repair with DynoMax exhaust brackets. Designed with OE-style features (where applicable) to support undercar exhaust components, DynoMax brackets are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features (where applicable) for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – 36368 Exhaust System Hanger (Part No.36368)
from
$24.49
Complete your exhaust repair with DynoMax exhaust system hangers. Designed with OE-style features (where applicable) to support undercar exhaust components, DynoMax exhaust system hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features (where applicable) for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS¿–¿Made from quality steel for durability and long life
- PREMIUM MATERIALS┐–┐Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax« accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Energy Suspension – Track Arm Bushing Set (Part No.4.7128R)
Motive Gear – Differential Ring and Pinion (Part No.F10.5-355PK)
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)
Upgrade your 2002 Ford F-250 Super Duty with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2002 Ford F-250 Super Duty, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your F-250 Super Duty functioning at its best. At Advance Auto Parts, we offer a wide selection of 35 Performance and Racing Products for the 2002 Ford F-250 Super Duty, designed to meet your needs without breaking the bank.
From
Performance Oil Filter
replacements to
Performance Exhaust Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2002 Ford F-250 Super Duty at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $24.29 to $529.99, with
an average price of $203.49.
Our 35 Performance and Racing Products in stock come from 13 trusted brands, so you’re sure to find the right part for your 2002 Ford F-250 Super Duty without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 Ford F-250 Super Duty, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N, Spectre, Dynomax, and more.
K&N Performance and Racing Products
start at just $24.29 and boast an impressive 5 stars average rating from customers.
Spectre and Dynomax also bring quality to the table, with Performance and Racing Products available starting at $24.49, and at an average 4 stars rating.
With 237 customer reviews and counting, our 2002 Ford F-250 Super Duty Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2002 Ford F-250 Super Duty is always ready to roll. We’re committed to providing you with everything you need to keep your F-250 Super Duty in top shape, all in one place.
Start shopping confidently below for your 2002 Ford F-250 Super Duty!
Best-Selling Performance Oil Filters for 2002 Ford F-250 Super Duties
Enhance the driving experience in your Ford with 1 quality Performance Oil Filter components, starting at $24.29.
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-6001)
from
$24.29
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Most Popular 2002 Ford F-250 Super Duty Performance Exhaust Products
Customize your Ford with 8 Performance Exhaust Products products
like Performance Exhaust Mufflers,
Performance Exhaust Hardware, and
Performance Exhaust System Kits, all
priced under $529.99.
Dynomax – Super Turbo Muffler Universal Fit Aluminized Steel 13" L, 3" In, 2.5" Out, Oval (Part No.17674)
from
$89.99
DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone.
Product Features:
See More
Product Features:
- Large internal flow tubes improve exhaust flow and reduce backpressure
- Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
- Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
- Dyno proven to flow up to 700 SCFM
Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 22" L, 4" In, 4" Out, Round (Part No.17537)
from
$114.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Dynomax – Dual – 3in-2.5in Cat-Back Exhaust System – Super Turbo Muffler: Aluminized Steel (Part No.17313)
from
$529.99
Give your Ford F-250 or F-350’s exhaust system an upgrade with a DynoMax Super Turbo dual 3-in./2.5-in. cat-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow, reduces turbulence and absorbs unwanted interior resonance for a mellow tone.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for 1999-2004 Ford F-250 and F-350 5.4L V8 and 6.8L V10; 137-in., 142-in., 156-in., 158-in., 172-in. wheelbases; excludes chassis cab; see product information for compatibility and engine specs
- COMPLETE SOLUTION — Includes DynoMax Super Turbo muffler, pipes, hangers, clamps and cable ties
- EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
- EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
- IMPROVED FLOW CAPACITY — Aluminized-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- PRECISION DESIGN — Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications; dyno proven to flow up to 671 SCFM
- PREMIUM PERFORMANCE — Large flow tubes improve exhaust flow and reduce backpressure
- ENGINEERED TO LAST¿– Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
- ENGINEERED TO LAST┐– Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
- NOTES — Exits in rear on either side of license plate; 2.5-in. straight cut tail pipes
Dynomax – 36263 Exhaust Bracket (Part No.36263)
from
$37.49
Complete your exhaust repair with DynoMax exhaust brackets. Designed with OE-style features (where applicable) to support undercar exhaust components, DynoMax brackets are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features (where applicable) for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Flowmaster Inc. – 70 Series Muffler, 3in Center Inlet 3in Center Outlet, 22in long, Non-Reversible, Mild Sound (Part No.53070)
from
$221.99
The 70 series utilizes Flowmaster’s patented Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV’s, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Dynomax – 36368 Exhaust System Hanger (Part No.36368)
from
$24.49
Complete your exhaust repair with DynoMax exhaust system hangers. Designed with OE-style features (where applicable) to support undercar exhaust components, DynoMax exhaust system hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features (where applicable) for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS¿–¿Made from quality steel for durability and long life
- PREMIUM MATERIALS┐–┐Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax« accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Flowmaster Inc. – 70 Series Muffler, 3in Offset Inlet 3in Center Outlet, 22in long, Non-Reversible, Mild Sound (Part No.53071)
from
$221.99
The 70 series utilizes Flowmaster’s patented Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV’s, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 40 Series Muffler, 3in Center Inlet 3in Center Outlet, Non-Reversible, Aggressive Sound (Part No.953045)
from
$133.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Top Picks for 2002 Ford F-250 Super Duty Performance Ignition Products
Upgrade Ford F-250 Super Duties with top-quality Performance Ignition Products parts, including 1 OEM and aftermarket selections for your 2002 model.
MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)
from
$176.99
Using MSD’s DIS-4 ignition systems on your coil-on-plug Ford has always been a great upgrade, but honestly, the wiring poses quite a challenge. To ease this install, we now offer a wiring harness kit that’ll make the install nearly a direct plug-in. The harness provides a splice-free installation with connectors that plug directly into the factory unit. They even have corresponding wire colors. When used in conjunction with two DIS-4 ignitions and four dual ignition Adapters, PN 89121, your coil-on-plug Ford will receive all the spark it needs plus a two-step rev limit and step retard. And the best part is wiring will only take about an hour.
Product Features:
See More
Product Features:
- Easily install two DIS-4 Ignitions on late model Ford Engines
- Easy Connections w/No Splicing Or Cutting Into Factory Wiring
- Wiring the system will take only an hour
- Multiple direct plug in connectors
- Wiring the system will only take and hour
In-Demand Performance Air Filters for 2002 Ford F-250 Super Duties
Select from 2 premium Performance Air Filters parts for your 2002 Ford F-250 Super Duty, with prices ranging from $49.99 to $74.99.
Spectre – Spectre Replacement Air Filter (Part No.HPR8039)
from
$49.99
This Spectre OEM replacement air filter is an easy to install performance option for the stock cone shaped air filter in multiple Ford applications. With its HPR (High Performance Replacement) synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock oval and egg shaped Ford air filter housings, this air filter includes sealing gaskets at the base of the air filter to insure a proper seal for great engine protection.
Product Features:
See More
Product Features:
- HPR OE Replacement Air Filter
- High flow replacement filter designed to fit perfectly in your stock air box
- Engineered for increased flow and greater performance
- Fits multiple Ford applications
- Factory pre-oiled and ready to use
- Easy to install with no special tools or skills required
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2248)
from
$74.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
- REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
- EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
Most Sold 2002 Ford F-250 Super Duty Performance Steering Products
Explore our best-selling Ford parts for the 2002 F-250 Super Duty among 5 OEM and aftermarket options starting from $35.99.
Rancho – RS5000 Steering Damper (Part No.RS5406)
from
$78.99
Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
- ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
- ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
- HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
Rancho – Dual Steering Damper Kit (Part No.RS98509)
from
$257.99
Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho® steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes two Rancho RS5000® steering stabilizers and installation brackets.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for Ford F-250 and F-350 heavy-duty trucks
- IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
- ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires.
- ENGINEERED TO LAST — Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
- EASY TO INSTALL — Includes one Rancho RS5000® steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
- RESISTS CORROSION — Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
- PRECISION DESIGN — Brackets are CNC cut and bent to exact specifications for a perfect fit
Rancho – Steering Damper Bracket (Part No.RS5542)
from
$85.99
Designed to mount a dual steering stabilizer to a Ford® F-250, F-350 or Excursion without any modifications, the Rancho® dual steering stabilizer bracket is made of high-strength, low-alloy steel and includes the mounting hardware for easy installation.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for Ford F-250 and F-350 heavy-duty trucks and Ford Excursion SUVs with Rancho RS5000® steering stabilizers
- ENHANCES PERFORMANCE — Protects dual steering stabilizer from contacting other components at full jounce travel ideal for off-roading, towing/hauling and street performance applications
- RESISTS CORROSION — Durable black powder-coat finish resists rust and corrosion
- ENGINEERED TO LAST — Features 0.25-in. high-strength, low-alloy steel construction for long life
- EASY TO INSTALL — Bolts directly to factory steering linkage with included mounting hardware, no modifications needed
- PRECISION DESIGN — Brackets are CNC cut and bent to exact specifications for a perfect fit
Energy Suspension – Sway Bar Bushing Set (Part No.4.5187G)
from
$54.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Track Arm Bushing Set (Part No.4.7128R)
Top-Rated Performance and Racing Products Brands For Your 2002 Ford F-250 Super Duty
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2002 Ford F-250 Super Duties. Below you’ll find some of our best rated Performance and Racing Products from K&N, Spectre, and Dynomax, and more. Performance and Racing Products from these brands that fit a 2002 F-250 Super Duty start at just $24.29 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2002 Ford F-250 Super Duty Performance and Racing Products
When it comes to maintaining or upgrading your 2002 Ford F-250 Super Duty, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2002 Ford F-250 Super Duty. With over 5 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $24.29, with an average price of just $229.85. Plus, with over 43 customer reviews and an average rating of 5 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$349.99
$349.99
(7)
Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter
“Not hard to install but you do need some basic knowledge.”
from
$349.99
$349.99
(10)
Cold Air Intake: Adds Up To 15 Horsepower, With Million Mile Air Filter
“Great product. Easy to install. Can tell a difference especially with a performance tuner.”
from
$24.29
$24.29
(6)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
“Great filter for the price”
Popular Spectre 2002 Ford F-250 Super Duty Performance and Racing Products
Spectre auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2002 Ford F-250 Super Duty owner should feel confident when installing genuine Spectre parts in their vehicle. To ensure the best fit and performance for your 2002 F-250 Super Duty, Advance Auto Parts carries a full inventory of 2 Spectre Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Spectre Performance and Racing Products range from $49.99 to $199.99, plus, with more than 11 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$199.99
$199.99
(1)
Cold Air Intake Kit Engineered to Add Horsepower & Torque
“my 2003 f-350 superduty with a v-10 seems to be lacking in throttle response ever since i got it. i wasn’t impressed with the v-10. started asking aro”
FAQs for 2002 Ford F-250 Super Duty Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2002 Ford F-250 Super Duties?
Out of 35 Performance and Racing Products that fit 2002 Ford F-250 Super Duties, the following parts are the top sellers:
- Spectre Replacement Air Filter (10162674) – $49.99
- Super Turbo Muffler Universal Fit Aluminized Steel 13" L, 3" In, 2.5" Out, Oval (18290065) – $89.99
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120027) – $24.29
What’s the price range for 2002 Ford F-250 Super Duty Performance and Racing Products?
Performance and Racing Product prices for the 2002 Ford F-250 Super Duty start at $24.29 and go up to $529.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2002 Ford F-250 Super Duty?
The average price for Performance and Racing Products for the 2002 Ford F-250 Super Duty is $203.49. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Ford F-250 Super Duty model years?
What are the cheapest Performance and Racing Products for my 2002 Ford F-250 Super Duty?
The cheapest 2002 Ford F-250 Super Duty Performance and Racing Products we carry in stock are:
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120027) – $24.29
- 36368 Exhaust System Hanger (20200777) – $24.49
- Axle Pivot Bushing Set (22908007) – $27.99
- Axle Pivot Bushing Set (22908008) – $29.99
- Track Arm Bushing Set (22908464) – $35.99
What are the top-rated Performance and Racing Products that fit the 2002 Ford F-250 Super Duty?
Out of 237 reviews by customers, our 2002 Ford F-250 Super Duty Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2002 Ford F-250 Super Duty and their top-rated products:
- Performance Air Intake Kits
- Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (17400298) – $349.99
- Cold Air Intake: Adds Up To 15 Horsepower, With Million Mile Air Filter (17402023) – $349.99
- Cold Air Intake Kit Engineered to Add Horsepower & Torque (22905810) – $199.99
- Performance Air Filters
- Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (17400298) – $349.99
- Cold Air Intake: Adds Up To 15 Horsepower, With Million Mile Air Filter (17402023) – $349.99
- Cold Air Intake Kit Engineered to Add Horsepower & Torque (22905810) – $199.99
What types of Performance and Racing Products do you sell for my 2002 Ford F-250 Super Duty?
As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 2002 Ford F-250 Super Duty:
Can I get help with 2002 Ford F-250 Super Duty Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.
What is your return policy for Ford F-250 Super Duty Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Ford F-250 Super Duty Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
