1999 Jeep Wrangler Performance and Racing Products

Essential 1999 Jeep Wrangler Performance and Racing Products

Omix – Engine Gasket Set (Part No.17442.06)

Engine Gasket Set

from

$152.99
Are your Jeep’s engine gaskets leaking? Or, are you rebuilding an engine and need fresh gaskets? Omix-ADA offers high-quality replacement gaskets that will give you years of service and get you back on the road.

Product Features:
  • Full Lower Gasket Set
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Engine Gasket Set (Part No.17441.09)

Engine Gasket Set

from

$181.99
Are your Jeep’s engine gaskets leaking? Or, are you rebuilding an engine and need fresh gaskets? Omix-ADA offers high-quality replacement gaskets that will give you years of service and get you back on the road.

Product Features:
  • Full Upper Gasket Set
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Rotor Rear 03-07 Kj, 03-06 Tj (Part No.16703.03)

Rotor Rear 03-07 Kj, 03-06 Tj

from

$85.99
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:
  • 2002-2007 Liberty, 2003-2006 Wrangler, Disc Brake Rotor (Front)
See More

Energy Suspension – MasterBshKt (Part No.2.18108G)

MasterBshKt

from

$807.99
MasterBshKt

Energy Suspension – Control Arm Bushing Set (Part No.2.3106G)

Control Arm Bushing Set

from

$111.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Omix – Oil Pan (Part No.17437.01)

Oil Pan

from

$264.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Steel
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Rugged Ridge – Heavy Duty Differential Cover (Part No.16595.44)

Heavy Duty Differential Cover

from

$271.99
Made from either 3/8 inch cast steel or 5/16 inch stamped steel, these heavy-duty covers are designed to protect your differential and all its working parts for as long as you own your vehicle.

Product Features:
  • Painted Black Inside and Out
  • 3/8 in. Cast Steel
  • Reinforced Protection For Fill Plug
  • Hardware Included
  • Limited 5 Year Warranty
See More

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9050)

Cold Air Intake Kit Engineered to Add Horsepower & Torque

from

$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:
  • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
  • IMPROVED ENGINE SOUND: Hear the power under the hood
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
  • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
  • WILL NOT VOID VEHICLE WARRANTY
See More

Rampage – Dual Strap Sport Handle, Rear Seat (Part No.769101)

Dual Strap Sport Handle, Rear Seat

from

$11.99
Cramp killer sport handles. Universal, adjustable, hook and loop attachment fits round or square bars – 2″ to 5″ diameter. Use anywhere for assess or stability. Durable 1.5-inch nylon webbing with closed cell foam ‘comfort grip’ handle. Unique, flexible 4-inch wraparound backing plate adds rigidity. Prevents bunching and improves handle pull strength.

Product Features:
  • Attachment Fits 2 in. To 5 in. Diameter
  • Use Anywhere For Stability
  • Durable Nylon Webbing Foam Handle
  • Unique Flexible 4 in. Wraparound Backing Plate
  • Provides Rigidity
  • Prevents Bunching And Improves Handle
See More

Energy Suspension – Control Arm Bump Stop Set (Part No.2.9101G)

Control Arm Bump Stop Set

from

$42.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Helps Prevent Damage to Control Arm
See More

Energy Suspension – Motor Mount (Part No.2.1104G)

Motor Mount

from

$71.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:
  • Gains Both Performance and Longevity
  • Will Handle Any and All Torque
  • Out Lasts Rubber
See More

Rugged Ridge – Catback; Exhaust System (Part No.17606.75)

Catback; Exhaust System

from

$1234.99
Open up your Jeep’s exhaust with this great looking and long lasting polished stainless steel dual exhaust system. You’ll get a mellow exhaust note that will set your rig apart while enjoying increased performance. The 2-1/4 inch mandrel bent pipes give h

Product Features:
  • Mellow Exhaust Note
  • Mandrel Bent Pipes
  • Added Flow
  • Stainless Steel
  • Works w/ 3.6L and 3.8L engines
See More

Rugged Ridge – Suspension Lift Kit (Part No.18415.30)

Suspension Lift Kit

from

$1441.99
Designed by a dedicated team of Jeep enthusiasts, the ORV suspension program is one of the most complete programs available. We have looked at each application in detail to provide the very best and most complete solution for your specific Jeep model. Sin

Product Features:
  • Black Powder Coated
  • 2 in. Lift
  • Smooth Ride
  • Direct Fit
  • Limited 5 Year Warranty
See More

Energy Suspension – Track Arm Bushing Set (Part No.2.7102R)

Track Arm Bushing Set

from

$13.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Omix – Distributor Cap (Part No.17244.10)

Distributor Cap

from

$37.49
Is your Jeep running rough? Over time ignition parts will deteriorate. It’s easier to replace them now than to have a roadside breakdown in the future. Order high quality ignition parts from Omix-ADA to get your Jeep running smooth again.

Product Features:
  • For 4.0L
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Clutch Fork (Part No.16914.07)

Clutch Fork

from

$21.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Steel
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Oil Pan Gasket (Part No.17439.06)

Oil Pan Gasket

from

$56.99
Tired of looking at the stains on your driveway? Are you repairing or rebuilding your engine? Gaskets are a cheap solution to prevent or stop leaks. Omix-ADA offers high quality replacement gaskets designed specifically for your Jeep.

Product Features:
  • Rubber
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Fuel Pump Electric (Part No.17709.08)

Fuel Pump Electric

from

$211.99
Has your Jeep left you on the side of the road? There’s not much guessing with a fuel pump. They either work or they don’t. Omix-ADA offers high quality fuel pumps to get you going again.

Product Features:
  • Electric
  • Built To Meet Or Exceed OE Specifications
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Crankshaft Pulley And Damper (Part No.17461.02)

Crankshaft Pulley And Damper

from

$84.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Metal
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Alternator 99-00 2.5L Tj, 99 4.0L Tj. 99-00 Xj, 99 Xj 2.5L 117 Amp (Part No.17225.13)

Alternator 99-00 2.5L Tj, 99 4.0L Tj. 99-00 Xj, 99 Xj 2.5L 117 Amp

from

$421.99
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:
  • 1999-2000 Wrangler (2.5L), 1999 Wrangler (4.0L), 1999-2000 Cherokee (2.5L & 4.0L), Alternator (117 Amp)
See More

Motive Gear – Differential Mini Spool (Part No.MSD44-30)

Differential Mini Spool

from

$101.99


Product Features:
  • MINI SPOOL – DANA 44, 30 SPL.
See More

Omix – Timing Cover (Part No.17457.07)

Timing Cover

from

$99.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Cover And Oil Pan Gasket
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Spectre – Spectre Replacement Air Filter (Part No.HPR8205)

Spectre Replacement Air Filter

from

$19.99
Spectre’s High Performance Replacement Air Filters are engineered to outperform ordinary paper filters by providing increased air flow for improved performance. Manufactured using high quality materials including pre-dyed synthetic media, urethane, and steel mesh, this performance air filter is factory pre-oiled and ready to use.

Product Features:
  • High performance and high air flow filter
  • Filter media is non-woven synthetic and pre-dyed
  • Replaces stock air filter
  • Easy to install with no special tools or skills required
  • Reinforced with a steel mesh
See More

Omix – Pitman Arm (Part No.18006.05)

Pitman Arm

from

$56.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme

Product Features:
  • Steel
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Clutch Bearing (Part No.16906.06)

Clutch Bearing

from

$72.99
Having problems with your clutch? Does it slip or chatter when you let the pedal out? The clutch disc, pressure plate, or throw-out bearing are probably worn out. It’s always a good idea to replace all three at the same time. That will save you labor in t

Product Features:
  • Many Different Jeep Applications
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Energy Suspension – Sway Bar Bushing Set (Part No.2.5111G)

Sway Bar Bushing Set

from

$32.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Omix – Timing Chain (Part No.17453.09)

Timing Chain

from

$53.99
Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain and

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Popular 1999 Jeep Wrangler Performance and Racing Products Categories

1999 Jeep Wrangler Performance and Racing Products

You count on your 1999 Jeep Wrangler to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 79 Performance and Racing Products ranging in price from $6.99 to $1,441.99, you’re sure to find everything you need for your 1999 Jeep Wrangler.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 11 different brands like K&N, Accel, and Energy Suspension. 1999 Jeep Wrangler Performance and Racing Products start as low as $6.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 336 extensive product reviews on 1999 Jeep Wrangler Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Skid Plate with 2.6 stars and Rotor:Jeep 4.0L L6 with 5.0 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1999 Jeep Wrangler below to get started!

Top-Rated Performance and Racing Products Brands For Your 1999 Jeep Wrangler

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1999 Jeep Wrangler running right for years to come. In our inventory you’ll find brands like K&N, Accel, Energy Suspension, and even more.

Popular Mallory Performance and Racing Products

You’ll find popular Mallory brand products across Performance Ignition Products. All are waiting to get your 1999 Jeep Wrangler back on the road. Some of the top-rated Mallory products in these categories are:
Unilite Ignition Module
from $85.29
(3)
Unilite Ignition Module
Performance Ignition Parts

FAQs for 1999 Jeep Wrangler Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1999 Jeep Wrangler?

Out of 79 Performance and Racing Products for the 1999 Jeep Wrangler, the most popular in our inventory are:
Tst Jeep 94-99 4.0L Ho Efi
from $108.99
(16)
Tst Jeep 94-99 4.0L Ho Efi
Performance Distributor Cap and Rotor Kits
High-Performance Ignition Coil - Direct OE Fit
from $72.39
(18)
High-Performance Ignition Coil – Direct OE Fit
Performance Coils
Control Arm Bump Stop Set
from $42.99
This product is not rated
Control Arm Bump Stop Set
Performance Chassis Bump Stops

What are the top-rated 1999 Jeep Wrangler Performance and Racing Products?

Top-rated Performance and Racing Products for your 1999 Jeep Wrangler based on customer reviews/ratings are:
Skid Plate
from $184.99
(5)
Skid Plate
“The part was perfect, the car runs better and drive smoother than before, highly recommend Advance Auto Parts”
Rotor:Jeep 4.0L L6
from $18.09
(1)
Rotor:Jeep 4.0L L6
“You can’t beat Fel-Pro for gaskets period”
Engine Gasket Set
from $154.99
(1)
Engine Gasket Set
“Gasket set waiting other parts before starting project”